Subject: questions and bug report
To: None <port-arm32@NetBSD.ORG>
From: Laurent DOMISSE <domisse@credm.com>
List: port-arm32
Date: 11/21/1997 11:18:52
--------------04FC2DEFB66D617327357737
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I'm totally agree with Kjetil B. about the work done with the RiscBSD
1.3 release. Great work !
Some bug report :
Minor :
- with new driver for RapIDE card, the first drive is now 0 and not
anymore 4 so you
should correct adress for the mountufs
- Config in !BtRiscBSD is read only afetr copyint it to the hard disc.
Need to be r/w when
saving the config.
- 'Part_info', selecting ATAFS, Drive 0, I have :
Filecore partition size : 9B19C000 bytes
Filecore partition size : -3279 cylinders (0--3280) ....this is a
negative number (but abs(number) is ok)
Big one :
- It was not possible to upgrade via the CDROM as when reading the joe
set, I have an:
wdc_atapi_intr : warning : reading only 0 of 2048 bytes (infinite loop)
With a CTRL-D, I type halt, it give :
panic : init died (signal 0, exit 0)
a trace give :
Stopped at _Debugger+0x10 : ldmdb r11, {r11,r13,r15}
_panic (_panic+0x14)
_exit1 (_exit1+0x10)
_sys_exit(_sys_exit+0x10)
_sys_call (_syscall+0x10)
typing 'continue' have reboot the machine.
I have to copy everything on /usr/dritib and install the set from the
RiscBSD partition.
This works fine.
- Trying to run startx I have
/usr/libexec/ld.so : xinit : libXmu.so.6.0 : No such file or directory
(I've checked , /usr/X11R6/lib/libXmu.so.6.0 exist on my hard disc)
What's wrong ?
Good News :
- The Perl set seems to work fine :)
--
Laurent DOMISSE
CREDM : Webmaster / Admin / Perl Tel : 01 40 51 85 50
-------------------------------------------------------
Hobbies keywords : Skylink / Archimedes RPC-SA / W3Perl
--------------04FC2DEFB66D617327357737
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<HTML>
I'm totally agree with Kjetil B. about the work done with the RiscBSD 1.3
release. Great work !
<P>Some bug report :
<P>Minor :
<BR>- with new driver for RapIDE card, the first drive is now 0 and not
anymore 4 so you
<BR>should correct adress for the mountufs
<BR>- Config in !BtRiscBSD is read only afetr copyint it to the hard disc.
Need to be r/w when
<BR>saving the config.
<BR>- 'Part_info', selecting ATAFS, Drive 0, I have :
<BR>Filecore partition size : 9B19C000 bytes
<BR>Filecore partition size : -3279 cylinders (0--3280) ....this is
a negative number (but abs(number) is ok)
<P>Big one :
<BR>- It was not possible to upgrade via the CDROM as when reading the
joe set, I have an:
<BR>wdc_atapi_intr : warning : reading only 0 of 2048 bytes (infinite
loop)
<BR>With a CTRL-D, I type halt, it give :
<BR>panic : init died (signal 0, exit 0)
<BR>a trace give :
<BR>Stopped at _Debugger+0x10 : ldmdb r11, {r11,r13,r15}
<BR>_panic (_panic+0x14)
<BR>_exit1 (_exit1+0x10)
<BR>_sys_exit(_sys_exit+0x10)
<BR>_sys_call (_syscall+0x10)
<BR>typing 'continue' have reboot the machine.
<P>I have to copy everything on /usr/dritib and install the set from the
RiscBSD partition.
<BR>This works fine.
<P>- Trying to run startx I have
<BR>/usr/libexec/ld.so : xinit : libXmu.so.6.0 : No such
file or directory
<BR>(I've checked , /usr/X11R6/lib/libXmu.so.6.0 exist on my hard disc)
<BR>What's wrong ?
<BR>
<P>Good News :
<BR>- The Perl set seems to work fine :)
<BR>
<PRE>--
Laurent DOMISSE
CREDM : Webmaster / Admin / Perl Tel : 01 40 51 85 50
-------------------------------------------------------
Hobbies keywords : Skylink / Archimedes RPC-SA / W3Perl</PRE>
</HTML>
--------------04FC2DEFB66D617327357737--