I really don't get it. I installed NetBSD on an A3000 without =20
problems but this A1200 makes me mad.

I have a 20 GB HDD with 4 Partitions connected to internal IDE Port:

IDH0 - AmigaOS
IDH1 - root
IDH2 - swap
IDH3 - usr

After loading the kernel it writes:

no file system for wd0 (dev 0x1100)
cannot mount root, error =3D 79
root device (default wd0a):

Ok, wd0a would be my AmigaOS Partition so I changed it to wd0b and =20
the rest like in the install guide is written. But I always get an =20
error when he tries to mount the partitions afte the network =20
configuration.

Either he writes

exec: mount_ffs -o async /dev/wd0a /mnt
mount_ffs: /dev/wd0a on /mnt: incorrect super block

or

exec: mount_ffs -o async /dev/wd0b /mnt
mount_ffs: /dev/wd0a on /mnt: Device busy


So anybody can help?


Am 16.08.2006 um 22:02 schrieb Matthias Muench:

> Ok, have another problem during installation. After configuration =20
> he tries to mount the root disk but fails:
>
> exec: mount_ffs -o async /dev/wd0a /mnt
> mount_ffs: /dev/wd0a on /mnt: incorrect super block
>
> Anyone an idea?
>
>
> Am 16.08.2006 um 21:08 schrieb Matthias Muench:
>
>> Ah, nevermind, I thought default is 'netbsd'....
>>
>>
>> Am 16.08.2006 um 12:22 schrieb Matthias M=FCnch:
>>
>>>
>>> -------- Original-Nachricht --------
>>> Datum: Wed, 16 Aug 2006 11:53:43 +0200
>>> Von: Ignatios Souvatzis <is@netbsd.org>
>>> An: Matthias Muench <djbase@gmx.de>
>>> Betreff: Re: NetBSD 3.0.1 Installer on A1200
>>>
>>>> Matthias Muench asked:
>>>>
>>>>> is there a way to boot the installer into normal PAL mode (no =20
>>>>> dblpal
>>>>> or dblntsc)?
>>>>
>>>> Boot without the parameter "-A" (AGA).
>>>
>>> When I boot with -A it opens also a dblntsc screen like without =20
>>> options. My 1084 can't handle these modes. I don't know but is =20
>>> this a bug?
>>>
>>> Cheers,
>>> Matthias
>>>
>>
>