I have prepared the partions in HDToolBox
and succesfully booted the miniroot.fs on the swap partion.
The problem comes when the installer tries to create the root filesystem.
Its says the filesystem is full?.
Im using the internal IDE connector.
So the HD should be wd0 and the root partion wd0a, swap wd0b.
I have also tried to manually create a filesystem
but same error.
All that work is mounting the ADOS(Amiga DOS)
filesystem.

this are the first errors:

creating filesystems...
uid, pid 309, command newfs, on -: file system full
/: write failed, file system is full
[1] Segmentation fault newfs /dev/r${_d...

I tried to mount too
mount_ffs -o async /dev/wd0a /mnt
mount_ffs: /dev/wd0a on /mnt: incorrect super block

It seems that I can't for some reason create a filesystem on a partion.

Have I configured the HD wrong?

I have a 48Mhz Viper accelerator with MMU, but no FPU, and 32 MB Ram, 8 GB =
2.5 Internal HD.
--=20
______________________________________________
Check out the latest SMS services @ http://www.linuxmail.org=20
This allows you to send and receive SMS through your mailbox.


Powered by Outblaze