Hi again,

I just tried to install NetBSD 1.6 from the folowing miniroot:

ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-1.6/amiga/installation/miniroot

The following miniroots hangs (MMU Fault)during installation:
ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-1.6.1/amiga/installation/miniroot
ftp://releng.netbsd.org/pub/NetBSD-daily/netbsd-1-6/200310270000/amiga/installation/miniroot/
ftp://releng.netbsd.org/pub/NetBSD-daily/netbsd-1-6-PATCH002-RC3/200311271900/amiga/installation/miniroot/

I forgot in the mail before to tell that The machines got an ariadne II
and a Picasso IV,

The machine now hangs up in startup, the distribution is from releng
200311271900, switching with the install kernel won't help...

here is the dmesg (I installed the binaries from the 200311271900
directory):
NetBSD 1.6.2_RC3 (GENERIC) #0: Thu Nov 27 17:52:39 UTC 2003
   
autobuild@tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002-RC3/amiga/OBJ/autobuild/netbsd-1-6-PATCH002-RC3/src/sys/arch/amiga/compile/GENERIC
Amiga 500/2000 (68060 rev.5 CPU/MMU/FPU)
total memory = 65024 KB
avail memory = 57224 KB
using 419 buffers containing 3352 KB of memory
memory segment 0 at 08000000 size 03f80000
memory segment 1 at 00000000 size 00100000
mainbus0 (root)
clock0 at mainbus0: CIA B system hz 100 hardware hz 709379
Calibrating delay loop... 21/1024 us
a2kbbc0 at mainbus0
ser0 at mainbus0: input fifo 512 output fifo 32
par0 at mainbus0
kbd0 at mainbus0: CIA A type Amiga
ms0 at mainbus0
grfcc0 at mainbus0
grf0 at grfcc0: width 640 height 400 colors 4
ite0 at grf0: rows 0 cols 0 repeat at (30/100)s next at (10/100)s has
keyboard
fdc0 at mainbus0: dmabuf pa 0xe3694: dmabuf ka 0x889d694
fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
aucc0 at mainbus0
audio0 at aucc0: half duplex
zbus0 at mainbus0: i/o size 0x00400000
bztzsc0 at zbus0 pa 0xea0000 man/pro 8512/24: address 0x8afdf00: FAS216,
40MHz, SCSI ID 7
scsibus0 at bztzsc0: 8 targets, 8 luns per target
ne0 at zbus0 pa 0xe90000 man/pro 2167/202
ne0: Ethernet address 00:60:30:00:40:7f
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x18 0x10] auto
grfcl0 at zbus0 pa 0x200000 man/pro 2167/21
grf3 at grfcl0: width 640 height 480 colors 16
ite3 at grf3: rows 60 cols 80 repeat at (30/100)s next at (10/100)s has
keyboard
grfcl: 4MB Picasso IV being used
grfcl1 at zbus0 pa 0x400000 man/pro 2167/22
ite at grfcl1:  not configured
grfcl2 at zbus0 pa 0xec0000 man/pro 2167/23
ite at grfcl2:  not configured
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <QUANTUM, ATLAS IV 9 WLS, 0B0B> SCSI3
0/direct fixed
sd0: 8761 MB, 13816 cyl, 4 head, 324 sec, 512 bytes/sect x 17942584
sectors
sd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers, tagged
queueing
cd0 at scsibus0 target 4 lun 0: <PLEXTOR, CD-ROM PX-40TS, 1.11> SCSI2
5/cdrom removable
cd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers
4 views configured
Kernelized RAIDframe activated
root on sd0a dumps on sd0b
root file system type: ffs

I'll try a simple 1.6 install with a simple 1.6 kernel

Regards,
Rodolphe

-- 
int main(void){char*a="\n",b=34,*d="int main(void){char*a=",
*c="%s%c%cn%c,b=34,*d=%c%s%c,%s*c=%c%s%c,%s*e=%c%s%c;%s%s;}%s",
*e="printf(c,d,b,92,b,b,d,b,a,b,c,b,a,b,e,b,a,e,a)";
printf(c,d,b,92,b,b,d,b,a,b,c,b,a,b,e,b,a,e,a);}