Port-amiga archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

1.6 & -current miniroot: grey screen after loading kernel



I'm trying to update my Amiga 2000 from 1.1(!) to 1.6. Trying to boot the
miniroot loads the kernel, then prints:

        Loading netbsd: 18.... [....] <spinning wheel here>

        *** Loading from 0x...... to Fastram 0x200000 ***

then the screen goes grey and that's it.

I've tried 1.6 and -current miniroots, but they do the same both.

Hardware is an Amiga 2000 with A2630 (030@25MHz, 4MB RAM), a 4MB RAM board
(16 bit), A2065 and A2091. The 8MB of memory are mapped as one block from
0x200000 (and 1MB chip RAM goes from 0x0).

Any clues?


 - Hubert

P.S.: I'm not subscribed to this list, please keep me on CC:.
P.P.S.: "NetBSD/Amiga 1.6K Bootstrap, Revision 3.0" <- i guess that
        this is actually the second stage bootstrap - maybe it should
        say so? and while there make the port name lowercase, like
        all our portnames are:

        NetBSD/amiga 1.6K secondary bootstrap, rev 3.0

-- 
Want to get a clue on IPv6 but don't know where to start? Try this:
* Basics -> http://www.onlamp.com/pub/a/onlamp/2001/05/24/ipv6_tutorial.html
* Setup  -> http://www.onlamp.com/pub/a/onlamp/2001/06/01/ipv6_tutorial.html
Of course with your #1 IPv6 ready operating system -> http://www.NetBSD.org/



Home | Main Index | Thread Index | Old Index