Re: make readme (pkgsrc)

["Georges Heinesch" <geohei-ml%geohei.lu@localhost>]

Quoting Ignatios Souvatzis (10-May-01 21:34:24):

> On Thu, May 10, 2001 at 10:18:09PM +0200, Ignatios Souvatzis wrote:
>> On Thu, May 10, 2001 at 07:13:49PM +0100, Georges Heinesch wrote:
>> > Hi.
>> > 
>> > Is it "normal" that "make readme" inside /usr/pkgsrc takes days
>> > (!) on a A3000 with CSPPC 060/604 (50/233 MHz). I let it run for
>> > more than 2 days and interrupted it at /usr/pkgsrc/games.
>> > 
>> > What's so difficult in maiking README.html files?
>> > Is there possibly any Amiga related problem here?
>> > How can I make it faster?
>> 
>> Faster disk, I guess. Then, faster disk, and then, faster disk.
>> 
>> Of course, a 500 MHz CPU would help a bit, too.
>> 
>> Hubert, what are the times for faster machines?

> I've heard, about 8 hours on a 133 MHz PPC machine... thats with a
> fast disk;
> 80000 make calls (eighty thousand); that was a few months ago,
> nodwadays it would take longer.

Arghh ... ;((

> Georges, were is your disk connected (and what disk) - the sbic or
> the siopng ?

Ignatios, sbic or siopng are terms unknown to me (sorry, newbie).
Below you find all relevant (and more) data dmesg gives out.

HTH

----- cut here -----
[...]
ahsc0 at mainbus0
scsibus0 at ahsc0: 8 targets, 8 luns per target
aucc0 at mainbus0
audio0 at aucc0: half duplex
zbus0 at mainbus0: i/o size 0x04000000
board at zbus0: pa 0xe90000 man/pro 18260/12 not configured
ne0 at zbus0 pa 0xea0000 man/pro 2167/202
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x18 0x10] auto
ne0: Ethernet address 00:60:30:00:44:75
grfcv0 at zbus0 pa 0x40000000 man/pro 8512/34
grf5 at grfcv0: width 800 height 600 colors 16
ite5 at grf5: rows 75 cols 100 repeat at (30/100)s next at (10/100)s has 
keyboard
grfcv: CyberVision64 with 4MB being used
cbiiisc0 at zbus0 pa 0xf01060 man/pro 8512/100
cbiiisc0: siopng type 770 id 7 reset V1
scsibus1 at cbiiisc0: 16 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 5 lun 0: <, XP32150, L912> SCSI2 0/direct fixed
sd0: 2050 MB, 3907 cyl, 10 head, 107 sec, 512 bytes/sect x 4199760 sectors
sd1 at scsibus0 target 6 lun 0: <QUANTUM, XP34550S, LXY4> SCSI2 0/direct fixed
sd1: 4341 MB, 5899 cyl, 10 head, 150 sec, 512 bytes/sect x 8890760 sectors
scsibus1: waiting 2 seconds for devices to settle...
cd0 at scsibus1 target 1 lun 0: <PLEXTOR, CD-R   PX-W124TS, 1.04> SCSI2 5/cdrom 
removable
cd1 at scsibus1 target 2 lun 0: <PLEXTOR, CD-ROM PX-32TS, 1.03> SCSI2 5/cdrom 
removable
cbiiisc0: target 3 rejected wide request
sd2 at scsibus1 target 3 lun 0: <iomega, jaz 1GB, H.71> SCSI2 0/direct removable
sd2: drive offline
st0 at scsibus1 target 4 lun 0: <HP, C1537A, L708> SCSI2 1/sequential removable
st0: drive empty
cbiiisc0: target 8 now wide 1
sd3 at scsibus1 target 8 lun 0: <QUANTUM, VIKING II 4.5WSE, 5520> SCSI2 
0/direct fixed
sd3: 4350 MB, 8338 cyl, 5 head, 213 sec, 512 bytes/sect x 8910423 sectors
4 views configured
warning found rdb->secpercyl(1339) != rdb->nsectors(1340) * rdb->nheads(1)
warning unknown dostype: 0x0 marking unused
Partition 'DH_fusion' geometry 1/1340 differs from RDB 1/1340
Partition 'DH_big' geometry 1/1340 differs from RDB 1/1340
warning found rdb->secpercyl(257) != rdb->nsectors(258) * rdb->nheads(1)
Partition 'DH0' geometry 1/258 differs from RDB 1/258
Partition 'DH1' geometry 1/258 differs from RDB 1/258
Partition 'DH2' geometry 1/258 differs from RDB 1/258
Partition 'DH3' geometry 1/258 differs from RDB 1/258
Partition 'DH4' geometry 1/258 differs from RDB 1/258
Partition 'DH5' geometry 1/258 differs from RDB 1/258
----- cut here -----


-- 
Cu  Georges Heinesch, Luxembourg
    geohei%geohei.lu@localhost
    http://www.geohei.lu
    PGP RSA & DH/DSS public key on request and on public servers

... all animals are equal, but some animals are more equal ...