Port-amiga archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
???
Here my dmesg stdout!
----- cut here -----
NetBSD 1.4.2 (GENERIC) #14: Sat Mar 4 15:34:14 CET 2000
is@jocelyn:/usr/local/1.4.x/src/sys/arch/amiga/compile/GENERIC
Amiga 3000 (68060 rev.5 CPU/MMU/FPU)
[...]
cbiiisc0: abort reset: dstat 80, istat 08 sist 0040 sien 0000 sbcl 21
scntl0 d4 scntl1 10 scntl2 80 scntl3 95
scid 67 sxfer 2f sdid 02 gpreg 0f
sfbr 00 socl 01 ssid 00 sbcl 21
dstat 80 sstat0 00 sstat1 09 sstat2 00
ctest0 00 ctest1 f0 ctest2 05 ctest3 10
dfifo 00 ctest4 00 ctest5 04 ctest6 33
dcmd 89 dbc2 83 dbc1 00 dbc0 00
dmode c0 dien 00 dwt 00 dcntl 20
stest0 06 stest1 0f stest2 00 stest3 00
istat 08 sien 0000 sist 0000 respid 0080
sidl 0000 sodl 0000 sbdl 0038
dsps fffffd98 dsp 0814262c (+270)
dsa 08bb401c temp 00000000 dnad 0814262c
scratcha bbfeff88 scratchb 5fefddde adder 081423c4
cbiiisc0: siopng type 770 id 7 reset V1
cbiiisc0: target 3 rejected wide request
cbiiisc0: target 3 now synchronous, period=100ns, offset=15
siopng sync: siop_sxfr 2f, siop_scntl3 35
sd2 at scsibus1 targ 3 lun 0: <iomega, jaz 1GB, J^77> SCSI2 0/direct removable
sd2: 1021MB, 1021 cyl, 64 head, 32 sec, 512 bytes/sect x 2091050 sectors
cbiiisc0: target 4 now synchronous, period=100ns, offset=16
siopng sync: siop_sxfr 30, siop_scntl3 35
st0 at scsibus1 targ 4 lun 0: <HP, C1537A, L708> SCSI2 1/sequential removable
st0: density code 0x25, 512-byte blocks, write-enabled
cbiiisc0: target 8 now wide 1
cbiiisc0: target 8 now synchronous, period=50ns, offset=16
siopng sync: siop_sxfr 30, siop_scntl3 95
sd3 at scsibus1 targ 8 lun 0: <QUANTUM, VIKING II 4.5WSE, 5520> SCSI2 0/direct
fixed
sd3: 4350MB, 8338 cyl, 5 head, 213 sec, 512 bytes/sect x 8910423 sectors
10 views configured
warning found rdb->secpercyl(1339) != rdb->nsectors(1340) * rdb->nheads(1)
warning unknown dostype: 0x0 marking unused
Partition 'DH_fusion' geometry 1/1340 differs from RDB 1/1340
Partition 'DH_big' geometry 1/1340 differs from RDB 1/1340
warning found rdb->secpercyl(4127) != rdb->nsectors(4128) * rdb->nheads(1)
Partition 'DH0' geometry 1/4128 differs from RDB 1/4128
Partition 'DH1' geometry 1/4128 differs from RDB 1/4128
Partition 'DH2' geometry 1/4128 differs from RDB 1/4128
Partition 'DH3' geometry 1/4128 differs from RDB 1/4128
Partition 'DH4' geometry 1/4128 differs from RDB 1/4128
Partition 'DH5' geometry 1/4128 differs from RDB 1/4128
root on sd1a dumps on sd1b
root file system type: ffs
----- cut here -----
Look at the following lines:
warning found rdb->secpercyl(1339) != rdb->nsectors(1340) * rdb->nheads(1)
warning found rdb->secpercyl(4127) != rdb->nsectors(4128) * rdb->nheads(1)
What's that about?
TIA
--
Cu Georges Heinesch, Luxembourg
geohei%geohei.lu@localhost
http://www.geohei.lu
PGP 2.6.3i / 5.1i public key on request and on public servers
... N1, TO/GA, 80 KTS, V1, Rotate, V2
Home |
Main Index |
Thread Index |
Old Index