Sorry for the reposting, but I lost some NetBSD Mailinglist mails
yesterday. I would like to explain my BFFS 1.5 beta problem in detail.

   What I would like to do ... I would like to create a DOSDriver for
   the NetBSD_root: partition (200 MB). This one is on a SCSI Drive
   (ID 6). I would like to be able to mount it at convenience. In
   other words, I opt for the Mountlist (DOSDriver) solution, and not
   for the RDB option where I I would have to add the BFFSFileSystem
   into the RDB. This would mean that the NetBSD_root partition is
   mounted at all times AmigaOS boots up.

Here what HDToolbox says about my NetBSD_root: partition:

----- cut here -----
Start Cyl: 2
End Cyl: 145
Total Cyl: 144
Partition Device Name: NetBSD_root
Bootable: no

File System: Custom File System
Automount this partition: yes
Identifier: 0x4e425207
MasK: 0x7ffffffe
MaxTransfer: 0xffffff
File system block size: 512
Reserverd blocks at beginning: 0
Reserverd blocks at end: 0
Use custom boot code: yes
Use custom boot blocks: 16

Cylinders: 3104
Heads: 1
Blocks per Track: 2864
locks per Cylinder: 2864
----- cut here -----

Here my DOSDriver:

----- cut here -----
/*
 *  BFFS mountlist
 *  by Georges Heinesch <geohei@geohei.lu>
 *  15.05.2000
 *
 *  NetBSD_root
 *
 */

    FileSystem      = L:BFFSFileSystem
    Device          = scsi.device
    Unit            = 6
    Flags           = 0
    Activate        = 1
    Stacksize       = 1024
    SectorsPerTrack = 2864
    Surfaces        = 1
    LowCyl          = 2
    HighCyl         = 145
    Priority        = 5
    GlobVec         = -1
    Buffers         = 500
    Reserved        = -1
    PreAlloc        = 0
    DosType         = 0x42464653
----- cut here -----

When I mount the partition from the Shell, nothing happens.
When I make a dir to the partition, a requester pops up which says:
"No disk present in device NETBSD_ROOT" (uppercase!?!?)

----- cut here -----
11.Ram Disk:> mount NetBSD_root:
11.Ram Disk:> dir NetBSD_root:
Could not get information for NetBSD_root:
no disk in drive
11.Ram Disk:>
----- cut here -----

The info and assign commands spit out this here:

----- cut here -----
>info
Mounted disks:
Unit      Size    Used    Free Full Errs   Status   Name
JAZ:      No disk present
CRW0:     No disk present
CD0:      No disk present
RAM:     1028K    1028       0 100%   0  Read/Write Ram Disk
DH0:      100M   32988   18610  64%   0  Read/Write WB_3.1
DF0:      No disk present
DF1:      No disk present
DH_big:  1024M  458297   66311  87%   0  Read/Write big
DH_huge: 1734M  119036 3433945   3%   0  Read/Write huge
DH1:      300M  151351    2415  98%   0  Read/Write Work
DH2:     1050M  494029   43641  92%   0  Read/Write Art
DH3:     1350M  608732   82706  88%   0  Read/Write Misc
DH4:     1350M  669706   21732  97%   0  Read/Write Comms
DH5:      193M   58960   40110  60%   0  Read/Write Temp

Volumes available:
Ram Disk [Mounted]
Temp [Mounted]
Comms [Mounted]
Misc [Mounted]
Art [Mounted]
Work [Mounted]
huge [Mounted]
big [Mounted]
WB_3.1 [Mounted]
> assign
Volumes:
Ram Disk [Mounted]
Temp [Mounted]
Comms [Mounted]
Misc [Mounted]
Art [Mounted]
Work [Mounted]
huge [Mounted]
big [Mounted]
WB_3.1 [Mounted]

Directories:
[...]

Devices:
NETBSD_ROOT KRAW KCON PIPE JAZ
AUDIO CRW0 CD0 RAM CON
RAW SER PAR PRT DH0
DF0 DF1 DH_fusion DH_big DH_huge
DH1 DH2 DH3 DH4 DH5
----- cut here -----

What is wrong here?

-- 
Cu  Georges Heinesch, Luxembourg
    geohei@geohei.lu
    http://www.geohei.lu
    PGP 2.6.3i / 5.1i public key on request and on public servers

... N49.34.09 E006.09.01