Re: grey screen with PicassoIV

["François-Xavier D'Hollander" <fdhollander%nordnet.fr@localhost>]

Hello Ignatios

Le 27-Nov-99, Ignatios Souvatzis a écrit:

>> oh, it's a french modem connected on serial port. nothing to do with
>> Amiga. This modem have self memory to do fax, email, answer machine
>> without the computer switchs on.
> 
> Then it is innocent, I guess. Unless it sends a BREAK signal to the
> machine, which might bring the machine into the kernel debugger for the
> serial console for the brief moment the serial is the console (until the
> proper grf device has been decided upon).
> 
> I suggest that you try, just once, without it.
> 
>> PROCESSOR:    CPU 68040/68040fpu
>> CUSTOM CHIPS:    AA PAL Alice (id=$0023), AA Lisa (id=$00F8)
>> VERS:    Kickstart version 40.68, Exec version 40.10, Disk version 40.42
>> RAM:    Node type $A, Attributes $505 (FAST), at $7000000-$7FFFFFF (16.0
>> meg)
>>     Node type $A, Attributes $605 (FAST), at $200000-$7FFFFF (6.0 meg)
> 
> Zorro II memory, huh? (I guess on the GVP board(s)?)
> Boot without this.  The parameter is -n0.

don't work. same behavior than explained after.

>>    Node type $A, Attributes $703 (CHIP), at $1000-$1FFFFF (~2.0 meg)
>> BOARDS:
>> Board + ROM (HD?) (unidentified):   Prod=2167/24($877/$18)
>>     (@$40000000, size 32meg, subsize same)
>> Board + ROM (HD?) (unidentified):   Prod=2017/11($7E1/$B) (@$E90000 64K)
>> RAM (unidentified):   Prod=2017/10($7E1/$A) (@$200000 4meg Mem)
>> RAM (unidentified):   Prod=2017/10($7E1/$A) (@$600000 2meg Mem)
> 
> The GVP memory.
> 
>>  Board + ROM (HD?) (unidentified):   Prod=2206/25($89E/$19)
>>      (@$42000000, size 16meg, subsize same)
> What is this?

My new Fast ata friver from Elbox. But I use only my internal ide for
netbsd.

But the most strange thing is now:
netbsd boots only when I have my FastATA connected. When I deconnect it,
loadbsd freezes. No grey screen this times.


Now, with my Fast ATA connected. If don't launch the WB (boot without
startup-sequence), I have the grey screen. If launch the wb, netbsd boots
right.
I done test with 68040.library from Phase5 and from MMULib (on aminet).


Have you an idea about this problem? This new clues give you some ideas?


Best regards.

FX

-- 
----------------------------------------------------------------------
Micronik BigTower (rev 4.0) -   Amiga 4000 (rev B)  - Kickstart v40.68
 A3640 (rev 3.1)             -   16 Mo  -   FireBall SE 4.3 Go
  Picasso IV (v 1.2)          -   iiyama 19" Pro 45
   Elbox Fast ATA 4000         -   GVP A4000-HC+8 Series II (rev 2)
  GVP IO/Extender (rev 6)     -   
 Epson Stylus Color          -   OLITEC SelfMemory 2000
----------------------------------------------------------------------