Ok, I post what I got on my screen:

--> start's on next line:
Copyright ....
....
Maxproc 148, mem size 24 MB: allocating 3 KPT pages
NetBSD 1.3.2 (GENERIC) #0: Wed May 13 00:51:45 EDT 1998
    chopps@yahoo.emich.edu:/.......
Amiga 4000 (68060 rev.1 CPU/MMU/FPU)
real mem = 25165824 (3072 pages)
avail mem = 21495808 (2624 pages)
using 166 buffers containing 1359872 bytes of memory
memory segment 0 at 80000000 size 2000000
memory segment 1 at 0 size 20000
mainbus0 (root)
clock at mainbus0: CIA B system hz 100 hardware hz 709379
Calibrating delay loop 21/1024 us
a34kbbc0 at mainbus0
ser0 at mainbus0: input fif 512 output fifo 32
par0 at mainbus0
kbd0 at mainbus0: CIA A type Amiga
ms0 at mainbus0
ms1 at mainbus0
grfcc0 at mainbus0
grf0 at grfcc0: with 640 height 400 color 4
ite0 at grf0: rows 0 cols 0 repear at (30/100)s next at (10/100)s has keyboard
fdc0 at mainbus0: dmabuf pa 0x1e12bc: dmabuf ka 0x2ddd2bc
fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
idsec0 at mainbus0
aucc0 at mainbus0
audio0 at aucc0
zbus0 at mainbus0: i/o size 0x4000000
grfcv0 at zbus0 pa: 040000000 man/pro 8512/34
grf5 a5 grfcv0: with 640 height 480 colors 16
ite5 at grf5: rows 60 cols 80 repeat at (30/100)s next at (10/100)s has keyboard
grfcv: CyberVision64 with 4MB beeing used
flsc at zbus0: pa 0xe900000 man/pro 8512/11 not configured
10 vies configured
root device: "the prompt is here, I press ENTER"
use one of fd0[a-p] halt

--> ended in previous line

I hope this information helps You to help me :)

	regards

		Andreas

 

On Thu, 12 Nov 1998, Ignatios Souvatzis wrote:

> On Thu, Nov 12, 1998 at 09:28:15AM +0100, Andreas Patrick Fleuti wrote:
> 
> > When I boot (with loadbsd -b netbsd or directly from swap partition),
> > there is no sd0 or sd0b or anything connected at the SCSI chain.
> > I transferd the miniroot.fs [NetBSD-1.3.2] to swap (and later also to root
> > but it didn't help).
> > I got then a prompt I should enter fd0[a-p] halt, which means probably
> > there is just the floppy disc, which is recogonized.
> > I checked the settings in HDToolBox serveral times. They should be fine.
> > 
> > What's wrong?
> > 
> > 
> > 
> > P.S. I'm using a Amiga 4000/60 Cyberstorm MK I and CyberSCSI I (Plextor
> > CD-ROM, Quantum Empire 1GB) 
> 
> What does NetBSD say about this? (that is: please tell us all the kernel 
> detects, exactly as-is)
> 	-is
>