Re: Strange messages 2nd try...

[Patryk Logiewa <silverdr%inet.com.pl@localhost>]

Dnia 01-Gru-96, Ignatios Souvatzis napisaî:
>Hi Patryk,


>this sounds like a really broken kernel, e.g., not a normal netbsd-1.2
>kernel. Tell us more about your hardware setup and kernel version, please.


I did it already in the 1st try. Here it comes again!



NetBSD 1.2 (GENERIC) #0: Thu Sep 26 10:27:49 EDT 1996
   
chopps%water.emich.edu@localhost:/exp/NetBSD/NetBSD-1-2/src/sys/arch/amiga/compile/GENERIC
Amiga 4000 (m68040 CPU/MMU/FPU)
real  mem = 54525952 (6656 pages)
avail mem = 49627136 (6058 pages)
using 345 buffers containing 2826240 bytes of memory
memory segment 0 at 8000000 size 3400000
memory segment 1 at 0 size 200000
mainbus0 (root)
clock0 at mainbus0: CIA B system hz 100 hardware hz 709379
ser0 at mainbus0: input fifo 512 output fifo 32
par0 at mainbus0
kbd0 at mainbus0: CIA A type Amiga
ms0 at mainbus0
ms1 at mainbus0
grfcc0 at mainbus0
grf0 at grfcc0: width 640 height 400 colors 4
ite0 at grf0: rows 0 cols 0 repeat at (30/100)s next at (10/100)s has keyboard
fdc0 at mainbus0: dmabuf pa 0x1e3690: dmabuf ka 0x2d5f690
fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
idesc0 at mainbus0
scsibus0 at idesc0
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, FIREBALL1280A, A63.> SCSI2 0/direct
fixed
sd0: 1222MB, 2484 cyl, 16 head, 63 sec, 512 bytes/sec
sd1 at scsibus0 targ 1 lun 0: <WDC AC32, 500H, 24.0> SCSI2 0/direct fixed
sd1: 2441MB, 4960 cyl, 16 head, 63 sec, 512 bytes/sec
zbus0 at mainbus0: i/o size 0x04080000
wesc0 at zbus0 rom 0x40000000 man/pro 2203/19
wesc0: siop id 7 reset V2
scsibus1 at wesc0
grfcv0 at zbus0 rom 0x44000000 man/pro 8512/34
grf5 at grfcv0: width 640 height 480 colors 16
ite5 at grf5: rows 60 cols 80 repeat at (30/100)s next at (10/100)s has
keyboard
grfcv: CyberVision64 with 4MB being used
empsc0 at zbus0 rom 0xe90000 man/pro 2171/32
empsc0: sci id 7
scsibus2 at empsc0
ae0 at zbus0 rom 0xea0000 man/pro 2167/201
ae0: hardware address 00:60:30:00:16:03 32K  chip-revision: B2
10 views configured
ok.





Then the strange messages begin:




 savecore: /netbsd: kvm_dump_mkheader: 
 lpd[77]: restarted
 /netbsd: arpresolve: can't allocate llinfo
 init: kernel security level changed from 0 to 1
 /netbsd: arpresolve: can't allocate llinfo
 last message repeated 3 times
 login: ROOT LOGIN (root) ON ttye5
 /netbsd: arpresolve: can't allocate llinfo
 last message repeated 5 times
 last message repeated 13 times
 inetd[80]: pmap_set: 100001 1 17 1024: Address already in use
 /netbsd: arpresolve: can't allocate llinfo
 last message repeated 7 times
 last message repeated 16 times
 inetd[80]: pmap_set: 100001 2 17 1024: Address already in use
 /netbsd: arpresolve: can't allocate llinfo
 last message repeated 7 times
 last message repeated 16 times
 inetd[80]: pmap_set: 100001 3 17 1024: Address already in use
 /netbsd: arpresolve: can't allocate llinfo
 last message repeated 7 times
 last message repeated 8 times




And so on...



Kernel is the generic kernel downloaded from the ftp.netbsd.org

There is also another problem when I turn on the CD drive on wesc
but it is not so important. First I want to get the 1.2 running...

TNX in advance!



-- 


      / /
     / /
    / /  silverdr%inet.com.pl@localhost
\ \/ /
 \/\/

--