Stock NetBSD 3.0. Motherboard is Gigabyte GA-K8N51GMF-9. nforce4.
Generic kernel.

Looks like the kernel needs some tuning.

All of the "sdxx Not Ready" near the bottom is a device that takes any kind
of RAM card that you can stick into it.

NetBSD 3.0 (GENERIC) #0: Sun Dec 18 21:51:37 UTC 2005
	builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/amd64/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 447 MB
avail memory = 420 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2210.20 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type ISA   
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
Nvidia product 0x02f1 (RAM memory, revision 0xa2) at pci0 dev 0 function 0 not configured
Nvidia product 0x02fa (RAM memory, revision 0xa2) at pci0 dev 0 function 1 not configured
Nvidia product 0x02fe (RAM memory, revision 0xa2) at pci0 dev 0 function 2 not configured
Nvidia product 0x02f8 (RAM memory, revision 0xa2) at pci0 dev 0 function 3 not configured
Nvidia product 0x02f9 (RAM memory, revision 0xa2) at pci0 dev 0 function 4 not configured
Nvidia product 0x02ff (RAM memory, revision 0xa2) at pci0 dev 0 function 5 not configured
Nvidia product 0x027f (RAM memory, revision 0xa2) at pci0 dev 0 function 6 not configured
Nvidia product 0x027e (RAM memory, revision 0xa2) at pci0 dev 0 function 7 not configured
vga0 at pci0 dev 5 function 0: Nvidia product 0x0242 (rev. 0xa2)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Nvidia product 0x0270 (RAM memory, revision 0xa2) at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0
pcib0: Nvidia product 0x0260 (rev. 0xa2)
Nvidia product 0x0264 (SMBus serial bus, revision 0xa2) at pci0 dev 10 function 1 not configured
Nvidia product 0x0272 (RAM memory, revision 0xa2) at pci0 dev 10 function 2 not configured
ohci0 at pci0 dev 11 function 0: Nvidia product 0x026d (rev. 0xa2)
ohci0: interrupting at ioapic0 pin 11 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
Nvidia product 0x026e (USB serial bus, interface 0x20, revision 0xa2) at pci0 dev 11 function 1 not configured
pciide0 at pci0 dev 13 function 0
pciide0: Nvidia product 0x0265 (rev. 0xa1)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
pciide1 at pci0 dev 14 function 0
pciide1: Nvidia product 0x0266 (rev. 0xa1)
pciide1: bus-master DMA support present, but unused (no driver support)
pciide1: primary channel wired to native-PCI mode
pciide1: using ioapic0 pin 11 (irq 11) for native-PCI interrupt
atabus1 at pciide1 channel 0
pciide1: secondary channel wired to native-PCI mode
atabus2 at pciide1 channel 1
pciide2 at pci0 dev 15 function 0
pciide2: Nvidia product 0x0267 (rev. 0xa1)
pciide2: bus-master DMA support present, but unused (no driver support)
pciide2: primary channel wired to native-PCI mode
pciide2: using ioapic0 pin 10 (irq 10) for native-PCI interrupt
atabus3 at pciide2 channel 0
pciide2: secondary channel wired to native-PCI mode
atabus4 at pciide2 channel 1
ppb0 at pci0 dev 16 function 0: Nvidia product 0x026f (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
VIA Technologies VT6306 IEEE 1394 Host Controller (Firewire serial bus, interface 0x10, revision 0x80) at pci1 dev 14 function 0 not configured
azalia0 at pci0 dev 16 function 1: Generic High Definition Audio Controller
pci_mem_find: expected mem type 00000004, found 00000000
azalia0: can't map device i/o space
Nvidia product 0x0269 (miscellaneous bridge, revision 0xa1) at pci0 dev 20 function 0 not configured
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
ioapic0: enabling
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON COMBO SOHC-5236V, 2006010800047632, R$0C> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 3
umass0 at uhub0 port 6 configuration 1 interface 0
umass0: Sony Silicon Media R/W, rev 2.00/3.95, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <Sony, USB   HS-CF Card, 3.95> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <Sony, USB   HS-xD/SM, 3.95> disk removable
sd1: drive offline
sd2 at scsibus0 target 0 lun 2: <Sony, USB   HS-MS Card, 3.95> disk removable
sd2: drive offline
sd3 at scsibus0 target 0 lun 3: <Sony, USB   HS-SD Card, 3.95> disk removable
sd3: drive offline
wd0 at atabus2 drive 0: <WDC WD800JD-22LSA0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76318 MB, 155058 cyl, 16 head, 63 sec, 512 bytes/sect x 156299375 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

-- 
Rick Kelly	rmk@rmkhome.com
		<http://www.rmkhome.com/>
		<http://rkba.rmkhome.com/>