In message <20031022134854.A9376@vaasje.org>
	on Wed, 22 Oct 2003 13:48:54 +0200,
	Frank van der Linden <fvdl@netbsd.org> wrote:
> For anyone who has a VIA or an nVidia nForce3 IDE controller (common on some
> of the new Athlon[64] boards): can you perhaps try:
> 
> 	1) updating your kernel sources
> 	2) applying the following patch
> 	3) booting the resulting kernel
> 
> ..and see if your IDE controller is still properly supported, or
> is now properly supported? Reports about older VIA PCI IDE controllers
> are also welcome.
My machine seems to OK.

-- 
Takahiro Kambe <taca@back-street.net>

NetBSD 1.6ZD (NS) #33: Thu Oct 23 23:48:39 JST 2003
	taca@edge.back-street.net:/usr/obj/i386/sys/arch/i386/compile/NS
total memory = 253 MB
avail memory = 231 MB
using 3271 buffers containing 13084 KB of memory
BIOS32 rev. 0 found at 0xfb370
PCI BIOS rev. 2.1 found at 0xfb3a0
pcibios: config mechanism [1][x], special cycles [1][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfdc70, size 112 bytes (5 entries)
PCI Interrupt Router at 000:00:0
PCI Exclusive IRQs: 5 10 11
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: VIA C3 Samuel 2/Ezra (686-class), 533.38 MHz, id 0x673
cpu0: features 80803035<FPU,DE,TSC,MSR,MTRR>
cpu0: features 80803035<PGE,MMX>
cpu0: features 80803035<3DNOW>
pnpbios0 at mainbus0: nodes 13, max len 78
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0601 (rev. 0x05)
agp0 at pchb0: aperture at 0xd3000000, size 0xe400000
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8601 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Trident Microsystems product 0x8500 (rev. 0x6a)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8231 IDE Controller (rev. 0x10)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8231 ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 17 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x1e)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x1e)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies product 0x8235 (miscellaneous bridge, revision 0x10) at pci0 dev 17 function 4 not configured
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 10
vr0: Ethernet address: 00:40:63:c0:76:e6
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 5
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk0 at pci0 dev 20 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:02:44:64:a0:a9
ukphy1 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000000, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
apm0 at mainbus0: Power Management spec V1.2 (slowidle)
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0: <ST380021A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SN-124, , q008> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Accounting started