PCI USB controller mapping issue on Multia...known problem?

[Scott Ellis <scotte%warped.com@localhost>]

Hi gang,

I've been feeling nostalgic lately, and dusted off a multia to play 
around with.  NetBSD 5.0-beta (circa January 16th) is working just fine, 
with the exception that I can't seem to get a PCI USB 2.0 controller to 
work in the box.

With either an NEC or VIA chipset card (the two I have laying around), I 
get:

uhci0 at pci0 dev 12 function 0: VIA Technologies VT83C572 USB 
Controller (rev. 0x50)
uhci0: interrupting at isa irq 15
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 12 function 1: VIA Technologies VT83C572 USB 
Controller (rev. 0x50)
uhci1: can't map i/o space
ehci0 at pci0 dev 12 function 2: VIA Technologies VT8237 EHCI USB 
Controller (rev. 0x51)
ehci0: can't map memory space

And of course, the kernel doesn't seem to notice when I plug something 
into the USB ports.  I don't see any outstanding PR's that look similar 
to this, but wanted to see if this is a known-issue, or if there are 
workarounds (some isacfg manipulation prior to booting maybe?) that will 
let these cards work?

Full dmesg is below.

        ScottE


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_BETA (GENERIC-$Revision: 1.325 $) #0: Thu Jan 15 13:44:44 PST 
2009
        
builds@wb27:/home/builds/ab/netbsd-5/alpha/200901150002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/alpha/compile/GENERIC
(PCI ISA), 167MHz, s/n
8192 byte page size, 1 processor.
total memory = 65536 KB
(2368 KB reserved for PROM, 63168 KB used by NetBSD)
avail memory = 51664 KB
timecounter: Timecounters tick every 0.976 msec
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), LCA-2 (21066)

lca0 at mainbus0
pci0 at lca0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 6 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at isa irq 11
scsibus0 at siop0: 8 targets, 8 luns per target
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (rev. 0x03)
tlp0 at pci0 dev 8 function 0: DECchip 21040 Ethernet, pass 2.3
tlp0: interrupting at isa irq 14
tlp0: Ethernet address 08:00:2b:e4:2f:ca
tlp0: 10baseT, 10baseT-FDX, 10base5, manual
unknown vendor 0x0047 product 0x0280 (miscellaneous network, revision 
0x47) at pci0 dev 9 function 0 not configured
tga0 at pci0 dev 11 function 0: DC21030 step B, board type T8-02
tga0: 1280 x 1024, 8bpp, Bt485 RAMDAC
tga0: interrupting at isa irq 10
wsdisplay0 at tga0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 12 function 0: VIA Technologies VT83C572 USB 
Controller (rev. 0x50)
uhci0: interrupting at isa irq 15
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 12 function 1: VIA Technologies VT83C572 USB 
Controller (rev. 0x50)
uhci1: can't map i/o space
ehci0 at pci0 dev 12 function 2: VIA Technologies VT8237 EHCI USB 
Controller (rev. 0x51)
ehci0: can't map memory space
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
attimer0: attached to pcppi0
stray isa irq 3
stray isa irq 4
timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0
timecounter: Timecounter "PCC" frequency 166639024 Hz quality 1000
scsibus0: waiting 2 seconds for devices to settle...
pcic0: controller 0 detecting irqs with mask 0xdeb8:..5
pcic0: can't share irq with cards; polling for socket events
pcic0: WARNING: powerhook_establish is deprecated
pcic0: WARNING: powerhook_establish is deprecated
uhub0 at usb0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, 
addr 1
uhub0: 2 ports with 2 removable, self powered
sd0 at scsibus0 target 0 lun 0: <TOSHIBA, MK1824FBV, 805B> disk fixed
sd0: 335 MB, 4195 cyl, 4 head, 41 sec, 512 bytes/sect x 687980 sectors
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
Kernelized RAIDframe activated
root on sd0a dumps on sd0b
root file system type: ffs
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!