Hello  to all
I am trying to use the Xdecnetbsd server  with a PowerStorm 3D30 
(PBXGB-AA).

 I have set the PBXGB-AA to the 1024 x 768 resolution as explained in 
http://h71000.www7.hp.com/wizard/wiz_2041.html?jumpid=reg_R1002_USEN.

When i do a ./XdecNetBSD or xinit the machine toggles the video console 
color and print the message
XdecNetBSD: screen 0: TGA, 1024x768
It does not start the xserver ( well I don't see the traditional X cross 
over the grey background ), but does  not hang the machine nor gives  me 
the  prompt  back.
What is the proper way to start it ?

Manu

Here is my dmesg
Unrecognized boot flag 'c'.
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0.2 (MORDECHAI-4) #0: Fri Feb 10 17:55:59 CET 2006
        manu@mordechai:/usr/src/sys/arch/alpha/compile/MORDECHAI-4
COMPAQ AlphaServer DS10 466 MHz, s/n 4004DQMZ10
8192 byte page size, 1 processor.
total memory = 512 MB
(2752 KB reserved for PROM, 509 MB used by NetBSD)
avail memory = 495 MB
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264-4
cpu0: Architecture extensions: 303<PAT,MVI,FIX,BWX>
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 2 Dchips, 1 memory bus of 16 bytes
tsc0: arrays present: 0MB, 512MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0
pci0 at tsp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10b9 product 0x5237 (USB serial bus, interface 0x10, revision 
0x03) at pci0 dev 1 function 0 not configured
sio0 at pci0 dev 7 function 0: vendor 0x10b9 product 0x1533 (rev. 0xc3)
tlp0 at pci0 dev 9 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at dec 6600 irq 29
tlp0: DEC , Ethernet address 08:00:2b:86:a9:46
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci0 dev 11 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at dec 6600 irq 30
tlp1: DEC , Ethernet address 08:00:2b:86:a9:73
tlp1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aceride0: primary channel interrupting at isa irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel wired to compatibility mode
aceride0: secondary channel interrupting at isa irq 15
atabus1 at aceride0 channel 1
tga0 at pci0 dev 14 function 0: TGA2 pass 2, board type T8-02
tga0: 1024 x 768, 8bpp, Bt485 RAMDAC
tga0: interrupting at dec 6600 irq 35
wsdisplay0 at tga0 (kbdmux ignored): console (std, vt100 emulation)
isp0 at pci0 dev 17 function 0: QLogic 1020 Fast Wide SCSI HBA
isp0: interrupting at dec 6600 irq 47
scsibus0 at isp0: 16 targets, 8 luns per target
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux ignored): console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 (mux ignored)
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay1 at vga0 (kbdmux ignored)
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
stray isa irq 15
stray isa irq 15
scsibus0: waiting 2 seconds for devices to settle...
stray isa irq 15
sd0 at scsibus0 target 0 lun 0: <COMPAQ, BB009222B5, B016> disk fixed
sd0: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <COMPAQ, BB009222B5, B016> disk fixed
sd1: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
wd0 at atabus0 drive 0: <WDC WD1200JB-00DUA3>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <COMPAQ  CDR-8435, , 0013> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(aceride0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
root on sd1a dumps on sd1b
root file system type: ffs
stray 6600 irq 35
stray 6600 irq 35
stray 6600 irq 35
stray 6600 irq 35
stray 6600 irq 35; stopped logging