Hi
 Just thought I would try this one out. It does fail, but am wondering if I
can provide help on this in any way?

P00>>>boot dka500
(boot dka500.5.0.2001.0 -flags A)
block 0 of dka500.5.0.2001.0 is a valid boot block
reading 14 blocks from dka500.5.0.2001.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1c00
initializing HWRPB at 2000
initializing page table at 7ff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

NetBSD/alpha 1.6.1 ISO 9660 Primary Bootstrap
Jumping to entry point...

NetBSD/alpha 1.6.1 Secondary Bootstrap, Revision 1.13
(autobuild@cs20.apochromatic.org, Mon Apr  7 07:42:10 UTC 2003)

VMS PAL rev: 0x4000300010114
OSF PAL rev: 0x4000100020116
Switch to OSF PAL code succeeded.

Boot flags: A
open netbsd: No such file or directory
open netbsd.gz: No such file or directory
open netbsd.bak: No such file or directory
open netbsd.bak.gz: No such file or directory
open netbsd.old: No such file or directory
open netbsd.old.gz: No such file or directory
open onetbsd: No such file or directory
open onetbsd.gz: No such file or directory
8082728+227032=0x7ecf40

Entering netbsd.alpha at 0xfffffc0000301290...
[ netbsd ELF symbol table not valid ]
[ no symbol table formats found ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.1 (INSTALL) #0: Mon Apr  7 08:05:39 UTC 2003

autobuild@cs20.apochromatic.org:/autobuilder/build/netbsd-1-6/alpha/OBJ/auto
builder/build/netbsd-1-6/src/sys/arch/alpha/compile/INSTALL
AlphaServer 2100A 5/250, 250MHz, s/n ni621u0557
8192 byte page size, 1 processor.
total memory = 128 MB
(2120 KB reserved for PROM, 125 MB used by NetBSD)
avail memory = 109 MB
using 818 buffers containing 6544 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164-5
ttwoga0 at mainbus0
ttwopci0 at ttwoga0 hose 0: T3 or T4 Gate Array rev. 5
sableio0 at ttwopci0 bus 0: Sable STDIO module
pckbc0 at sableio0 port 0x60
fdc1 at sableio0 port 0x3f0
fdc1: interrupting at T2 irq 7
fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
com0 at sableio0 port 0x3f8: ns16550a, working fifo
com0: console
com0: interrupting at T2 irq 15
com1 at sableio0 port 0x2f8: ns16550a, working fifo
com1: interrupting at T2 irq 8
lpt0 at sableio0 port 0x3bc
lpt0: interrupting at T2 irq 9
pci0 at ttwopci0 bus 0
pci0: i/o space, memory space enabled

halted CPU 0

halt code = 6
double error halt
PC = 19480