I can get XFree86's scanpci to return pci data on both the DS10 and
UP2000+
boxes i can access. However 'startx' still does not produce a usable
display on either
machine. XFree86 starts and runs, does not crash the machine eats cpu,
produces a
a blue screen , stoped by killing the xfree86 pid(telnet in to do this),
appears we can not map
memory correctly , probe of /var/log/XFree86.0.log indicates log stops
at memory probe.
vga driver goes all the way, produces a colorfull screen of lines and
patches, no cpu overhead
eaten, and box runs this way with low load.
attached is up2000+ scanpci results as well as XFree86.0.log
-mel
scanpci:
pci bus 0x0000 cardnum 0x05 function 0x00: vendor 0x1080 device 0xc693
 Contaq Microsystems 82c693

pci bus 0x0000 cardnum 0x05 function 0x01: vendor 0x1080 device 0xc693
 Contaq Microsystems 82c693

pci bus 0x0000 cardnum 0x05 function 0x02: vendor 0x1080 device 0xc693
 Contaq Microsystems 82c693

pci bus 0x0000 cardnum 0x05 function 0x03: vendor 0x1080 device 0xc693
 Contaq Microsystems 82c693

pci bus 0x0000 cardnum 0x06 function 0x00: vendor 0x9005 device 0x001f
 Adaptec AHA-2940U2/U2W / 7890/7891

pci bus 0x0000 cardnum 0x08 function 0x00: vendor 0x1011 device 0x0019
 Digital Equipment Corporation DECchip 21142/43

pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x121a device 0x0009
 3Dfx Interactive, Inc. Voodoo 4 / Voodoo 5
---------- ---------------------------------
-----------------------------------------------------
XFree86.0.log:
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: NetBSD/alpha 1.6P [ELF] The NetBSD Foundation,
Inc.
Build Date: 06 March 2003
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Mar  8 06:49:36 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "** Voodoo (generic)                   [tdfx]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/TrueType/" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/freefont/" does not exist.
        Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"

(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(--) Using wscons driver in pcvt compatibility mode (version 3.32)
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:05:0: chip 1080,c693 card 0000,0000 rev 00 class 06,01,00
hdr 80
(II) PCI: 00:05:1: chip 1080,c693 card 0000,0000 rev 00 class 01,01,80
hdr 80
(II) PCI: 00:05:2: chip 1080,c693 card 0000,0000 rev 00 class 01,01,00
hdr 80
(II) PCI: 00:05:3: chip 1080,c693 card 0000,0000 rev 00 class 0c,03,10
hdr 80
(II) PCI: 00:06:0: chip 9005,001f card 9005,000f rev 01 class 01,00,00
hdr 00
(II) PCI: 00:09:0: chip 1011,0019 card 1011,500b rev 30 class 02,00,00
hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:5:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is
set)
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x0008 (VGA_EN is
set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0xffffffff (0x100000000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x80000000 - 0xffffffff (0x80000000) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x80000000 - 0xffffffff (0x80000000) MX[B]
(II) Addressable bus resource ranges are
        [0] -1  0       0x00000000 - 0xffffffff (0x100000000) MX[B]
        [1] -1  0       0x00000000 - 0xffffffff (0x100000000) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0xffffffff - 0xffffffff (0x1) IX[B]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]