Hello all.

I got two DECpc axp150 and try to install NetBSD.
But NetBSD 1.6BETA2 hdcdboot retrieved from ftp.netbsd.org
got panic for both hardwares.

Since this is my first alpha so I have no idea.  Are there
any known problems ?  WindowsNT is successfully booted on
same hardware.

Any help will be appreciated.

Tacha
######################################################################
Alpha AXP System - ROM Version 2.2
Copyright (c) 1993 Digital Equipment Corporation.

Alpha AXP SRM Firmware Version - 370
System conducting power up tests
------------------------------------------------------------

Devnam            Devstat
--------          -------
     CPU          OK EV4 P3.0 6.6ns
     MEM          OK 80MB
     NVR          OK 
     SCC          OK 
      IT          OK 
     KBD          OK 
     LPT          OK 
     VGA          OK 
      NI          OK 08-00-2B-90-14-F7      DE422
    SCSI          OK 
------------------------------------------------------------
System power up OK.

  83 BOOT SYS
INIT-S-CPU...

?40 NOSUCHDEV
  84 FAIL

>>> show dev

  BOOTDEV      ADDR      DEVTYPE    RM/FX    DEVNAM      REV     NUMBYTES
  -------      ----      -------    -----    ------      ---     --------
  EZ0A         08-00-2B-90-14-F7
  FD0          PC Floppy DISK       RM   
  SCSI Devices..
  DKA0         A/0/0     DISK       FX       DNES-30     SA30    583.18MB 
  DKA400       A/4/0     RODISK     RM       RRD44       1094    ......  
  DKA600       A/6/0     DISK       FX       DSE2100     0307      2.11GB 
  HOST         A/7/0     PROC                AHA1742A    G.2 

>>> boot dka400
INIT-S-CPU...
AUDIT_BOOT_STARTS ... 
AUDIT_CHECKSUM_GOOD
AUDIT_LOAD_BEGINS
AUDIT_LOAD_DONE


NetBSD/alpha 1.6_BETA2 ustar Bootstrap, Revision 1.3
(bouyer@java, Thu Jun 20 12:01:51 MEST 2002)

VMS PAL rev: 0x100010530
OSF PAL rev: 0x20123
Switch to OSF PAL code succeeded.

Boot flags: 0,0
8080648+227032=0x7ec720

Entering netbsd at 0xfffffc0000301290...
Unrecognized boot flag '0'.
Unrecognized boot flag ','.
Unrecognized boot flag '0'.
[ netbsd ELF symbol table not valid ]
[ no symbol table formats found ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6_BETA2 (INSTALL) #0: Wed Jun 19 18:48:01 MEST 2002
    bouyer@java:/home/tmp/alpha/obj/sys/arch/alpha/compile/INSTALL
DEC2000 model 300, 150MHz, s/n 
8192 byte page size, 1 processor.
total memory = 81920 KB
(2048 KB reserved for PROM, 79872 KB used by NetBSD)
avail memory = 66000 KB
using 512 buffers containing 4096 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064-0
cpu0: Architecture extensions: fffffc000060bbd8<PAT,MVI>
jensenio0 at mainbus0
pckbc0 at jensenio0 port 0x60
pckbd0 at pckbc0 (kbd slot)
pckbc0: kbd slot interrupting at vector 0x980
wskbd0 at pckbd0 (mux ignored)
pms0 at pckbc0 (aux slot)
pckbc0: aux slot interrupting at vector 0x990
wsmouse0 at pms0 (mux ignored)
com0 at jensenio0 port 0x3f8: ns8250 or ns16450, no fifo
com0: console
com0: interrupting at vector 0x900
com1 at jensenio0 port 0x2f8: ns8250 or ns16450, no fifo
com1: interrupting at vector 0x920
lpt0 at jensenio0 port 0x3bc
panic: scb_set: bad vector 0x1
Stopped in pid 0 (swapper) at   0xfffffc0000561ec4:     ret     zero,(ra)
db>