This is a multi-part message in MIME format.
--------------9A34203702B110BD14B8EE37
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Anyone out there trying to use USB bus on alpha servers? I am having
problems with /dev/ugen0 on the as1000a , added a pci USB card which
allows umass tranfers, but can't seem to get my Kodak 290 to work with
gphoto2 and gtkam. dmesg included below for usb device addition -use
error -and removal. My complements to the NetBSD developers, pcmcia
wireless networking (wi0) driver allows this box
to be a reliable gateway.
-Mel

--------------9A34203702B110BD14B8EE37
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.4"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.4"

[ using 525056 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5Y (SINGLE) #0: Fri Nov  9 11:20:01 EST 2001
    mel@casey182.doodle.com:/usr/syssrc/sys/arch/alpha/compile/SINGLE
AlphaServer 1000A 5/333, 333MHz, s/n NI74400JYD
8192 byte page size, 1 processor.
total memory = 128 MB
(2016 KB reserved for PROM, 126 MB used by NetBSD)
avail memory = 111 MB
using 819 buffers containing 6552 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
cia0: using BWX for PCI config access
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pceb0 at pci0 dev 7 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
ppb0 at pci0 dev 8 function 0: Digital Equipment DECchip 21050 PCI-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
isp0 at pci1 dev 0 function 0
isp0: interrupting at dec_1000a irq 0
scsibus0 at isp0: 16 targets, 8 luns per target
vga0 at pci0 dev 11 function 0: Texas Instruments TVP4020 Permedia 2 (rev. 0x01)
wsdisplay0 at vga0 kbdmux -1: console (80x25, vt100 emulation)
tlp0 at pci0 dev 12 function 0: DECchip 21140A Ethernet, pass 2.0
tlp0: interrupting at dec_1000a irq 3
tlp0: DEC DE500-AA, Ethernet address 00:00:f8:05:c7:44
nsphy0 at tlp0 phy 5: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 13 function 0: Opti RM861HA (rev. 0x10)
ohci0: interrupting at dec_1000a irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
eisa0 at pceb0
eisa0: can't map I/O space for slot 9
eisa0: can't map I/O space for slot 10
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
wss0 at isa0 port 0x530-0x537 irq 9 drq 0: AD1848K
audio0 at wss0: half duplex, mmap
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
pcic1 at isa0 port 0x3e2-0x3e3 iomem 0xcc000-0xcffff
pcic1: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic1: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic1 controller 0 socket 0
pcmcia1 at pcic1 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <SEAGATE, ST39236LW, 0010> SCSI3 0/direct fixed
sd0: 8761 MB, 14384 cyl, 3 head, 415 sec, 512 bytes/sect x 17942584 sectors
sd0: sync (100.0ns offset 12), 16-bit (20.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <YAMAHA, CRW6416S, 1.0b> SCSI2 5/cdrom removable
cd0: async, 8-bit transfers
pcic1: controller 0 detecting irqs with mask 0xdeb8:..5..10..11..14..15
pcic1: using irq 5 for socket events
wi0 at pcmcia0 function 0: Lucent Technologies, WaveLAN/IEEE, Version 01.01
wi0: port 0x600-0x63fpcmcia0: card irq 10
 802.11 address 00:02:2d:3c:a2:b8
wi0: using Lucent chip or unknown chip
root on sd0a dumps on sd0b
root file system type: ffs
IP Filter: v3.4.16 initialized.  Default = pass all, Logging = disabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcmcia0: card irq 10
stray isa irq 10
ugen0 at uhub0 port 2
ugen0: Eastman Kodak Company KODAK DC290 Zoom Digital Camera, rev 1.00/1.00, addr 2
ugenioctl: USB_SET_TIMEOUT, no pipe
ugenioctl: USB_SET_TIMEOUT, no pipe
ugen0: at uhub0 port 2 (addr 2) disconnected
ugen0 detached
ugen0 at uhub0 port 2
ugen0: Eastman Kodak Company KODAK DC290 Zoom Digital Camera
ugenioctl: USB_SET_TIMEOUT, no pipe
ugenioctl: USB_SET_TIMEOUT, no pipe
ugen0: at uhub0 port 2 (addr 2) disconnected
ugen0 detached

--------------9A34203702B110BD14B8EE37--