This message is in MIME format.

---MOQ97924648097aa4f96d77ffbeea9f2187a901a83bd
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi,

I was searching (perhaps not enough) and I have not
found what is the device driver (/dev/what?) for the
serial port of my alpha DEC 3000/300 computer using
NetBSD 1.4.2.

I am using as console the DEC monitor and keyboard, and
and need the serial port to make serial connections to
other computers.

1) Do you know the device driver?
2) Do I need to reconfigure the kernel again?

Saludos,

           Ing. Ricardo Núñez
           Webmaster de la DST
           Universidad Simón Bolívar
           E-Mail: rinunez@usb.ve

---MOQ97924648097aa4f96d77ffbeea9f2187a901a83bd
Content-Type: text/plain; name="dmesg.netbsd.1.4.2.dec3000.300.txt"; name="dmesg.netbsd.1.4.2.dec3000.300.txt"; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
Content-Disposition: inline; filename="dmesg.netbsd.1.4.2.dec3000.300.txt"


[ preserving 186360 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4.2 (VERSION_1_4) #0: Thu Sep  7 13:12:07 VET 2000
    root@old-skynet.usb.ve:/usr/src/sys/arch/alpha/compile/VERSION_1_4
DEC 3000 - M300LX, 125MHz
8192 byte page size, 1 processor.
real mem = 268435456 (2097152 reserved for PROM, 266338304 used by NetBSD)
avail mem = 231440384
using 3251 buffers containing 26632192 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064-1 (pass 3)
tcasic0 at mainbus0
tc0 at tcasic0: 12.5 MHz clock
sfb0 at tc0 slot 4 offset 0x2000000: 1280 x 1024, 8bpp
wsdisplay0 at sfb0: console (std, sun emulation)
ioasic0 at tc0 slot 3 offset 0x0: slow mode
le0 at ioasic0 offset 0xc0000: address 08:00:2b:bf:94:f9
le0: 32 receive buffers, 8 transmit buffers
zsc0 at ioasic0 offset 0x100000
zsms0 at zsc0 channel 0
wsmouse0 at zsms0
zstty0 at zsc0 channel 1
zsc1 at ioasic0 offset 0x180000
zskbd0 at zsc1 channel 0
wskbd0 at zskbd0
zstty1 at zsc1 channel 1
mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible
AMD79c30 at ioasic0 offset 0x240000 not configured
tcds0 at tc0 slot 2 offset 0x0: TurboChannel Dual SCSI (baseboard)
asc0 at tcds0 chip 0: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at asc0: 8 targets, 8 luns per target
probe(asc0:0:0): max sync rate 5.00Mb/s
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ26L    (C) DEC, 440C> SCSI2 0/direct fixed
sd0: 1001MB, 3117 cyl, 8 head, 82 sec, 512 bytes/sect x 2050860 sectors
probe(asc0:1:0): max sync rate 5.00Mb/s
sd1 at scsibus0 targ 1 lun 0: <DEC, RZ26L    (C) DEC, 442D> SCSI2 0/direct fixed
sd1: 1001MB, 3117 cyl, 8 head, 82 sec, 512 bytes/sect x 2050860 sectors
probe(asc0:5:0): max sync rate 5.00Mb/s
sd2 at scsibus0 targ 5 lun 0: <SEAGATE, ST423451W, 0013> SCSI2 0/direct fixed
sd2: 22130MB, 6876 cyl, 28 head, 235 sec, 512 bytes/sect x 45322644 sectors
probe(asc0:6:0): max sync rate 5.00Mb/s
sd3 at scsibus0 targ 6 lun 0: <SEAGATE, ST423451W, 0013> SCSI2 0/direct fixed
sd3: 22130MB, 6876 cyl, 28 head, 235 sec, 512 bytes/sect x 45322644 sectors
wscons: wskbd0 glued to wsdisplay0
root on sd2a dumps on sd2b
root file system type: ffs

---MOQ97924648097aa4f96d77ffbeea9f2187a901a83bd--