Subject: RE: Multia pcmcia NIC adapter... I can't get it up!
To: 'sinteur' <john@dubbele.com>
From: David Woyciesjes <DAW@yalepress3.unipress.yale.edu>
List: port-alpha
Date: 04/25/2000 17:23:42
Here's the status...
In the 'dmesg' output, there is nothing obvious relating to the 3Com card...
except maybe this line...
>>>unknown vendor 0x0001 product 0x0000 (miscellaneous prehistoric, revision
0x01) at pci0 dev 9 function 0 not configured
(...the rest is at the end of this message...)
I'm probably missing something...

when I type 'ifconfig -a', i get this..

de0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 08:00:2b:e4:de:7d
        media: Ethernet autoselect (10baseT)
        status: active
        inet AAA.BBB.CCC.DDD netmask 0xffffff00 broadcast AAA.BBB.CCC.255
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33200
        inet 127.0.0.1 netmask 0xff000000 
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp3: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl2: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl3: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296

Did I not do something right to initialize the PC card?

---   David A Woyciesjes
---   C & IS Support Specialist
---   Yale University Press
---   mailto:david.woyciesjes@yale.edu
---   (203) 432-0953
---   ICQ # - 905818

> -----Original Message-----
> From:	sinteur [SMTP:john@dubbele.com]
> Sent:	Tuesday, April 25, 2000 4:23 PM
> To:	David Woyciesjes
> Subject:	Re: Multia pcmcia NIC adapter... I can't get it up!
> 
> >1. I have a 3Com 3C589C PC card. I don't see any evidence that NetBSD
> knows
> >the card is there... 
> 
> Is it listed when you check 'dmesg'?
> 
> >2. How do I get the 3Com going so the PC on the internal LAN sees the
> >Multia?
> 
> ifconfig is your friend :-)
> 
> >3. I'm having trouble also getting NAT up and running...
> 
> I can help with that, as soon as you have both cards up...
> 
> -John
> 
> 
OUTPUT FROM 'dmesg'-----


Unrecognized boot flag '0'.
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4.2 (INSTALL) #0: Sat Mar  4 04:55:40 PST 2000
    toddpw@chewie.toddpw.net:/usr/src/sys/arch/alpha/compile/INSTALL
(PCI ISA), 167MHz
8192 byte page size, 1 processor.
real mem = 75497472 (2424832 reserved for PROM, 73072640 used by NetBSD)
avail mem = 58318848
using 892 buffers containing 7307264 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), LCA-2 (21066 pass 2)
lca0 at mainbus0
pci0 at lca0 bus 0
pci0: i/o enabled, memory enabled
ncr0 at pci0 dev 6 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at isa irq 11
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets, 8 luns per target
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, MAVERICK 540S, 0905> SCSI2 0/direct
fixed
sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 8)
sd0: 516MB, 2853 cyl, 4 head, 92 sec, 512 bytes/sect x 1057758 sectors
cd0 at scsibus0 targ 1 lun 0: <NEC, CD-ROM DRIVE:501, 2.2> SCSI2 5/cdrom
removable
sio0 at pci0 dev 7 function 0: vendor 0x8086 product 0x0484 (rev. 0x03)
de0 at pci0 dev 8 function 0
de0: interrupting at isa irq 15
de0: DEC 21040 [10Mb/s] pass 2.3
de0: address 08:00:2b:e4:de:7d
vendor 0x0001 product 0x0000 (miscellaneous prehistoric, revision 0x01) at
pci0 dev 9 function 0 not configured
tga0 at pci0 dev 11 function 0: DC21030 step B, board type T8-02
tga0: 1024 x 768, 8bpp, Bt485 RAMDAC
tga0: interrupting at isa irq 10
wsdisplay0 at tga0: console (std, vt100 emulation)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
alpha_shared_intr_establish: isa irq 4: warning: using edge-triggered on
level-triggered
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
alpha_shared_intr_establish: isa irq 3: warning: using edge-triggered on
level-triggered
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 1: <IBM-H2344-A4>
wd0: drive supports 16-sector pio transfers, chs addressing
wd0: 328MB, 915 cyl, 15 head, 49 sec, 512 bytes/sect x 672525 sectors
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
wscons: wskbd0 glued to wsdisplay0 (console)
md0: internal 3072K image area
WARNING: can't figure what device matches "DVA 1 0 0 0 0 0 0"
root on md0a dumps on md0b
WARNING: clock gained 52 days -- CHECK AND RESET THE DATE!
root file system type: ffs
de0: enabling 10baseT port
wd0: no disk label
cd0(ncr0:1:0): illegal request, data = 00 00 00 00 24 00 00 00 00 00
syncing disks... done
rebooting...

Unrecognized boot flag '0'.
[ preserving 323456 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4.2 (GENERIC) #1: Sat Mar  4 03:08:26 PST 2000
    toddpw@chewie.toddpw.net:/usr/src/sys/arch/alpha/compile/GENERIC
(PCI ISA), 167MHz
8192 byte page size, 1 processor.
real mem = 75497472 (2424832 reserved for PROM, 73072640 used by NetBSD)
avail mem = 60243968
using 892 buffers containing 7307264 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), LCA-2 (21066 pass 2)
lca0 at mainbus0
pci0 at lca0 bus 0
pci0: i/o enabled, memory enabled
ncr0 at pci0 dev 6 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at isa irq 11
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets, 8 luns per target
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, MAVERICK 540S, 0905> SCSI2 0/direct
fixed
sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 8)
sd0: 516MB, 2853 cyl, 4 head, 92 sec, 512 bytes/sect x 1057758 sectors
cd0 at scsibus0 targ 1 lun 0: <NEC, CD-ROM DRIVE:501, 2.2> SCSI2 5/cdrom
removable
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x03)
de0 at pci0 dev 8 function 0
de0: interrupting at isa irq 15
de0: DEC 21040 [10Mb/s] pass 2.3
de0: address 08:00:2b:e4:de:7d
unknown vendor 0x0001 product 0x0000 (miscellaneous prehistoric, revision
0x01) at pci0 dev 9 function 0 not configured
tga0 at pci0 dev 11 function 0: DC21030 step B, board type T8-02
tga0: 1024 x 768, 8bpp, Bt485 RAMDAC
tga0: interrupting at isa irq 10
wsdisplay0 at tga0: console (std, vt100 emulation)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
alpha_shared_intr_establish: isa irq 4: warning: using edge-triggered on
level-triggered
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
alpha_shared_intr_establish: isa irq 3: warning: using edge-triggered on
level-triggered
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 1: <IBM-H2344-A4>
wd0: drive supports 16-sector pio transfers, chs addressing
wd0: 328MB, 915 cyl, 15 head, 49 sec, 512 bytes/sect x 672525 sectors
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
wscons: wskbd0 glued to wsdisplay0 (console)
root on sd0a dumps on sd0b
root file system type: ffs
de0: enabling 10baseT port