> > I tried the new kernel on an eb164, the IDE drive appears to
 > > configure correctly (same messages as a July kernel which
 > > worked fine, as did kernels before that) but any attempt to
 > > use it returns "device not configured".
 > 
 > Do you have a correct disk label on the drive?  A similar problem
 > tripped me up during my recent install of the hp300 port on a
 > brand new SCSI drive.  (I don't know much about Alpha systems,
 > though...)
 > 
 > - Håvard
 > 

Well, I'm checking the label and config path now, but if I just boot
up a -current kernel from July, prior to the big alpha rollback, then
it works fine. It's up right now, with the "old" kernel.

I'm not installing, just catching up to -current. Also, it was
requested that we try various system types. The eb164 is the only
type I have here that has not reported in with a successful test.


	 On 9/4 thorpej@nas.nasa.gov wrote: 

> If you have other system types, _please_ update your sources and build,
> and boot the kernels.  I _need_ to hear success and failure reports.



zeta# disklabel /dev/rwd0a
# /dev/rwd0a:
type: unknown
disk: ImageDisk
label: 
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 2097
total sectors: 2113776
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # milliseconds
track-to-track seek: 0  # milliseconds
drivedata: 0 

5 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
a:    60264        0    4.2BSD     2048  8192    16   # (Cyl.    0 - 59*)
b:   201600   407827      swap                        # (Cyl.  404*- 604)
c:  2113776        0    unused        0     0         # (Cyl.    0 - 2096)
d:   347563    60264    4.2BSD     2048  8192    16   # (Cyl.   59*- 404*)
e:  1504349   609427    4.2BSD     2048  8192    16   # (Cyl.  604*- 2096*)
zeta#