Hello,

i tried to run NetBSD/Alpha 1.2 (from the BSDisc CD-ROM) on a Cobra 275 AXP
form Carrera Computers.

The motherboard is an Evaluation Board EB64+ with onboard SCSI an Ethernet.

When i try to boot it, it gives me the following error:

---------------------------------------------------------------------------
>>>sho dev
dka0.0.0.5.0               DKA0           IBM 0662S12       !O  2 23
dka100.1.0.5.0             DKA100                    HP C3725S  4349
dva0.0.0.0.1               DVA0
ewa0.0.0.9.0               EWA0              00-20-F8-00-80-DF
pka0.7.0.5.0               PKA0                  SCSI Bus ID 7
>>>boot dka0
(boot dka0.0.0.5.0 -flags A)
block 0 of dka0.0.0.5.0 is a valid boot block
reading 15 blocks from dka0.0.0.5.0
bootstrap code read in
base = 110000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 102000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

NetBSD/Alpha primary boot...
Jumping to entry point...


NetBSD/Alpha boot, Revision $NetBSD: version,v 1.5 1996/05/09 23:54:18 cgd Exp $

(cgd@bunnahabhain.pdl.cs.cmu.edu, Fri Sep 13 16:10:36 EDT 1996)

VMS PAL revision: 0x1000000010530
OSF PAL rev: 0x1000000020123
Switch to OSF PAL code succeeded.

boot_dev = "SCSI 0 5 0 0 0 0 0"
boot_file = ""
boot_flags = "A"
boot_console = "0"
Boot: /netbsd A
1420032+137984+118752
calling fffffc0000230000 with 1e7, 81, 4, 200266c0, 0
panic: Unknown system type 20
halted.


halted CPU 0

halt code = 5
HALT instruction executed
PC = fffffc0000230190
---------------------------------------------------------------------------

Thanks for any help.


bye
Fabian                                         Only Amiga makes it possible
---------------------------------------------------------------------------
                             "Where do you want to spend your money today?"