Hi,

	I've been asked to help someone get a 3000/900 up and
running NetBSD. Booting off the 1.2 rz25 image, it gets:

wscons0 at sfb0panic: wscons_emul_attach: bogus location (n: 0/0, c: 0/0
halted.

Attached is a transcript of the boot.

This is with the most recent firmware (6.8) as well as 6.7.
There is no "interim"  firmware available for the 3000/900
on ftp.digital.com.

Any suggestions?

("set console serial" also does not function with this ROM monitor.
 There is no keyboard or monitor plugged in, and I'm not sure
 whether there is a frame buffer.)

Thanks!

--jhawk


>>> boot
INIT-S-CPU...
INIT-S-RESET_TC...
INIT-S-ASIC...
INIT-S-MEM...
INIT-S-NVR...
INIT-S-SCC...
INIT-S-NI...
INIT-S-SCSI...
INIT-S-ISDN...
INIT-S-TC5...
INIT-S-TC0...
AUDIT_BOOT_STARTS ... 
AUDIT_CHECKSUM_GOOD
AUDIT_LOAD_BEGINS
AUDIT_LOAD_DONE

NetBSD/Alpha primary boot...
Jumping to entry point...


NetBSD/Alpha boot, Revision $NetBSD: version,v 1.5 1996/05/09 23:54:18 cgd Exp $
(cgd@bunnahabhain.pdl.cs.cmu.edu, Fri Sep 13 16:10:36 EDT 1996)

VMS PAL revision: 0x100010538
OSF PAL rev: 0x2012d
Switch to OSF PAL code succeeded.

boot_dev = "SCSI 0 6 0 0 200 0 FLAMG-IO"
boot_file = ""
boot_flags = "A"
boot_console = "0"
Boot: /netbsd A
1420032+137984+118752
calling fffffc0000230000 with 1e7, b8, 4, 200266c0, 0
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.

NetBSD 1.2 (GENERIC) #78: Fri Sep 13 12:09:37 EDT 1996
    cgd@bunnahabhain.pdl.cs.cmu.edu:/usr/src/sys/arch/alpha/compile/GENERIC
DEC 3000/900 ("Flamingo45"), 275MHz
8192 byte page size, 1 processor.
real mem = 67108864 (2097152 reserved for PROM, 65011712 used by NetBSD)
avail mem = 53633024
using 793 buffers containing 6496256 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 21064A (EV45), Pass 4, Revision F001
cpu0: VAX FP support, IEEE FP support
tcasic0 at mainbus0
tc0 at tcasic0: 25 MHz clock
ioasic0 at tc0 slot 7 offset 0x0: fast mode
le0 at ioasic0 offset 0xc0000: address 08:00:2b:39:99:36
le0: 32 receive buffers, 8 transmit buffers
scc0 at ioasic0 offset 0x100000
scc1 at ioasic0 offset 0x180000: console
mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible
AMD79c30 at ioasic0 offset 0x240000 not configured
sfb0 at tc0 slot 7 offset 0x2000000: 0 x 0, 8bpp
wscons0 at sfb0panic: wscons_emul_attach: bogus location (n: 0/0, c: 0/0
halted.


?05 HLT INSTR
  PC= FFFFFC00.00230190 PSL= 00000000.00000006