pkgsrc-WIP-changes archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
perl5-devel: remove, older than lang/perl5
Module Name: pkgsrc-wip
Committed By: Thomas Klausner <wiz%NetBSD.org@localhost>
Pushed By: wiz
Date: Mon Nov 18 08:59:56 2024 +0100
Changeset: 32f69e3ed62a41b60256a9ca7d2bed699741955e
Modified Files:
Makefile
Removed Files:
perl5-devel/DESCR
perl5-devel/Makefile
perl5-devel/Makefile.common
perl5-devel/PLIST
perl5-devel/buildlink3.mk
perl5-devel/dirs.mk
perl5-devel/distinfo
perl5-devel/files/Policy.sh
perl5-devel/files/deinstall.tmpl
perl5-devel/files/install.tmpl
perl5-devel/files/install_threads.tmpl
perl5-devel/files/perllink.1
perl5-devel/files/perllink.in
perl5-devel/hacks.mk
perl5-devel/license.mk
perl5-devel/module.mk
perl5-devel/options.mk
perl5-devel/packlist.mk
perl5-devel/patches/patch-Configure
perl5-devel/patches/patch-Makefile.SH
perl5-devel/patches/patch-caretx.c
perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__BeOS.pm
perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__Unix.pm
perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_t_MM__BeOS.t
perl5-devel/patches/patch-hints_cygwin.sh
perl5-devel/patches/patch-hints_linux.sh
perl5-devel/patches/patch-hints_netbsd.sh
perl5-devel/patches/patch-hints_solaris__2.sh
perl5-devel/patches/patch-installperl
perl5-devel/vars.mk
perl5-devel/version.mk
Log Message:
perl5-devel: remove, older than lang/perl5
To see a diff of this commit:
https://wip.pkgsrc.org/cgi-bin/gitweb.cgi?p=pkgsrc-wip.git;a=commitdiff;h=32f69e3ed62a41b60256a9ca7d2bed699741955e
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
diffstat:
Makefile | 1 -
perl5-devel/DESCR | 9 -
perl5-devel/Makefile | 253 ---------------------
perl5-devel/Makefile.common | 14 --
perl5-devel/PLIST | 5 -
perl5-devel/buildlink3.mk | 46 ----
perl5-devel/dirs.mk | 41 ----
perl5-devel/distinfo | 16 --
perl5-devel/files/Policy.sh | 124 ----------
perl5-devel/files/deinstall.tmpl | 23 --
perl5-devel/files/install.tmpl | 11 -
perl5-devel/files/install_threads.tmpl | 24 --
perl5-devel/files/perllink.1 | 125 ----------
perl5-devel/files/perllink.in | 205 -----------------
perl5-devel/hacks.mk | 60 -----
perl5-devel/license.mk | 12 -
perl5-devel/module.mk | 239 -------------------
perl5-devel/options.mk | 100 --------
perl5-devel/packlist.mk | 129 -----------
perl5-devel/patches/patch-Configure | 223 ------------------
perl5-devel/patches/patch-Makefile.SH | 15 --
perl5-devel/patches/patch-caretx.c | 15 --
...pan_ExtUtils-MakeMaker_lib_ExtUtils_MM__BeOS.pm | 16 --
...pan_ExtUtils-MakeMaker_lib_ExtUtils_MM__Unix.pm | 36 ---
.../patch-cpan_ExtUtils-MakeMaker_t_MM__BeOS.t | 16 --
perl5-devel/patches/patch-hints_cygwin.sh | 15 --
perl5-devel/patches/patch-hints_linux.sh | 19 --
perl5-devel/patches/patch-hints_netbsd.sh | 41 ----
perl5-devel/patches/patch-hints_solaris__2.sh | 24 --
perl5-devel/patches/patch-installperl | 29 ---
perl5-devel/vars.mk | 44 ----
perl5-devel/version.mk | 35 ---
32 files changed, 1965 deletions(-)
diffs:
diff --git a/Makefile b/Makefile
index 3819f17d87..e1a11c984d 100644
--- a/Makefile
+++ b/Makefile
@@ -3075,7 +3075,6 @@ SUBDIR+= pear-phploc
SUBDIR+= peercoin
SUBDIR+= pegtl
SUBDIR+= pentagram
-SUBDIR+= perl5-devel
SUBDIR+= petsc
SUBDIR+= pgp6
SUBDIR+= pgplot
diff --git a/perl5-devel/DESCR b/perl5-devel/DESCR
deleted file mode 100644
index d4d2bffcdf..0000000000
--- a/perl5-devel/DESCR
+++ /dev/null
@@ -1,9 +0,0 @@
-Perl is a general-purpose programming language originally developed
-for text manipulation and now used for a wide range of tasks including
-system administration, web development, network programming, GUI
-development, and more. The language is intended to be practical (easy
-to use, efficient, complete) rather than beautiful (tiny, elegant,
-minimal). Its major features are that it's easy to use, supports both
-procedural and object-oriented (OO) programming, has powerful built-in
-support for text processing, and has one of the world's most impressive
-collections of third-party modules.
diff --git a/perl5-devel/Makefile b/perl5-devel/Makefile
deleted file mode 100644
index 58f7969f68..0000000000
--- a/perl5-devel/Makefile
+++ /dev/null
@@ -1,253 +0,0 @@
-# $NetBSD: Makefile,v 1.275 2022/04/01 16:39:12 wiz Exp $
-
-.include "license.mk"
-.include "Makefile.common"
-
-COMMENT= Practical Extraction and Report Language
-
-CONFLICTS+= perl-base-[0-9]* perl-thread-[0-9]*
-
-# when updating perl, you can remove packages that are included
-# in perl core, see
-# corelist -diff ${PREV_PKGVERSION} ${PKGVERSION}
-
-SUPERSEDES+= p5-Tie-File<=0.99
-SUPERSEDES+= p5-Time-HiRes-[0-9]*
-SUPERSEDES+= p5-DB_File-[0-9]*
-SUPERSEDES+= p5-Memoize<=1.03
-SUPERSEDES+= p5-I18N-LangTags<=0.39
-SUPERSEDES+= p5-Locale-Maketext<=1.23
-SUPERSEDES+= p5-experimental<=0.007
-
-# XXX: requires that gcc use an external perl to avoid circular dependencies
-USE_GCC_RUNTIME= yes
-USE_LANGUAGES= c c99
-
-.include "../../mk/bsd.prefs.mk"
-
-# Determine the Perl API version from the patchlevel.h file from the
-# source distribution.
-#
-PERL5_API_VERS= ${PERL5_API_VERS_cmd:sh}
-PERL5_API_VERS_cmd= \
- if ${TEST} -f ${WRKSRC}/patchlevel.h; then \
- ${AWK} '/\#define[ ]*PERL_API_REVISION/ { R = $$3 }\
- /\#define[ ]*PERL_API_VERSION/ { r = "."$$3 } \
- /\#define[ ]*PERL_API_SUBVERSION/ { s = "."$$3 } \
- END { printf "%s%s%s\n", R, r, s }' \
- ${WRKSRC}/patchlevel.h; \
- else \
- ${ECHO} "unknown"; \
- fi
-
-.include "dirs.mk"
-
-.include "../../mk/compiler.mk"
-
-HAS_CONFIGURE= yes
-CONFIGURE_SCRIPT= ./Configure
-CONFIGURE_ARGS+= -sde
-CONFIGURE_ARGS+= -Dldflags=${LDFLAGS:Q}
-# needed for packaging the unstable odd versions
-CONFIGURE_ARGS+= -Dusedevel
-MAKE_ENV+= LC_ALL="C"
-LDFLAGS.QNX+= -lm
-
-TEST_TARGET= test
-
-# Policy.sh generation
-# (see comments in files/Policy.sh)
-SUBST_CLASSES+= policysh
-SUBST_STAGE.policysh= pre-configure
-SUBST_FILES.policysh= Policy.sh
-SUBST_VARS.policysh+= MACHINE_ARCH
-SUBST_VARS.policysh+= LOWER_OPSYS
-SUBST_VARS.policysh+= OBJECT_FMT
-SUBST_VARS.policysh+= CC
-SUBST_VARS.policysh+= CFLAGS
-SUBST_VARS.policysh+= LDFLAGS
-SUBST_VARS.policysh+= COMPILER_RPATH_FLAG
-SUBST_VARS.policysh+= PERL5_PREFIX
-SUBST_VARS.policysh+= PERL5_SITEPREFIX
-SUBST_VARS.policysh+= PERL5_VENDORPREFIX
-SUBST_VARS.policysh+= PERL5_PERLBASE
-SUBST_VARS.policysh+= PERL5_SITEBASE
-SUBST_VARS.policysh+= PERL5_SITEBIN
-SUBST_VARS.policysh+= PERL5_VENDORBASE
-SUBST_VARS.policysh+= PERL5_PRIVLIB
-SUBST_VARS.policysh+= PERL5_SITELIB
-SUBST_VARS.policysh+= PERL5_VENDORLIB
-SUBST_VARS.policysh+= PKGMANDIR
-SUBST_VARS.policysh+= LOCALBASE
-SUBST_VARS.policysh+= PTHREAD_LDFLAGS
-
-# Avoid the ${TOOLS_BIN} path getting written to installed files.
-SUBST_CLASSES+= toolsbin
-SUBST_STAGE.toolsbin= pre-configure
-SUBST_FILES.toolsbin= Configure
-SUBST_VARS.toolsbin= TOOLS_RM
-
-SUBST_CLASSES+= pwd
-SUBST_STAGE.pwd= pre-configure
-SUBST_FILES.pwd= dist/PathTools/Cwd.pm
-SUBST_SED.pwd+= -e "s,/bin/pwd,${TOOLS_PLATFORM.pwd},g"
-
-.if ${OPSYS} == "Darwin" || ${OPSYS} == "Cygwin"
-#
-# The Perl build attempts to work around case-insensitivity problems on
-# HFS filesystems by using GNUmakefiles, so we need to use GNU make.
-#
-USE_TOOLS+= gmake
-MAKE_FILE= GNUmakefile
-.endif
-
-#
-# For the moment disable the building of a shared libperl.dylib on Darwin
-# => 9.0 as it breaks the build. This should just be considered a temporary
-# work around until the actual problem can be fixed as this worked for
-# Darwin < 9.0.
-#
-.if empty(MACHINE_PLATFORM:MDarwin-9.*-*)
-CONFIGURE_ARGS+= -Duseshrplib
-.endif
-
-# Perl embeds the full paths to the following tools in several installed
-# files, so make sure the paths to the ones in ${TOOLS_DIR} aren't used.
-#
-USE_TOOLS+= hostname ln rm sed test
-SUBST_VARS.policysh+= TOOLS_HOSTNAME_CMD
-SUBST_VARS.policysh+= TOOLS_LN
-TOOLS_ALIASES.sed= ${TOOLS_SED:T}
-SUBST_VARS.policysh+= TOOLS_SED
-SUBST_VARS.policysh+= TOOLS_SH
-SUBST_VARS.policysh+= TOOLS_TEST
-SUBST_VARS.policysh+= FALSE
-
-# Nail down the needed libraries for each platform here to avoid hidden
-# dependencies. If this isn't defined, then use the perl defaults for the
-# particular operating system.
-#
-LIBSWANTED.Bitrig= m crypt
-LIBSWANTED.Cygwin= m crypt dl
-LIBSWANTED.Darwin= m c
-LIBSWANTED.DragonFly= m crypt
-LIBSWANTED.FreeBSD= m crypt
-LIBSWANTED.GNUkFreeBSD= m crypt dl nsl
-LIBSWANTED.Haiku= network
-LIBSWANTED.HPUX= cl pthread $$libswanted # see Perl's README.hpux
-LIBSWANTED.IRIX= m crypt
-LIBSWANTED.Interix= m dl
-LIBSWANTED.Linux= m crypt dl nsl
-LIBSWANTED.Minix= m crypt c
-LIBSWANTED.MirBSD= m crypt
-LIBSWANTED.NetBSD= m crypt
-LIBSWANTED.OpenBSD= m crypt
-LIBSWANTED.SunOS= m crypt dl socket nsl
-LIBSWANTED.AIX= m crypt dl socket nsl bind c
-LIBSWANTED.SCO_SV= m crypt socket
-LIBSWANTED.UnixWare= m crypt socket
-LIBSWANTED= ${LIBSWANTED.${OPSYS}}
-SUBST_VARS.policysh+= LIBSWANTED
-
-# Nail down the directories in which the system libraries may be found.
-# If this isn't defined, then use the perl defaults for the particular
-# operating system.
-#
-SYSLIBPATH.Bitrig= /usr/lib
-SYSLIBPATH.Cygwin= /usr/lib
-SYSLIBPATH.Darwin= /usr/lib
-SYSLIBPATH.DragonFly= /usr/lib
-SYSLIBPATH.FreeBSD= /usr/lib
-SYSLIBPATH.Interix= /usr/lib
-SYSLIBPATH.Minix= /usr/lib
-SYSLIBPATH.MirBSD= /usr/lib
-SYSLIBPATH.NetBSD= /usr/lib
-SYSLIBPATH.OpenBSD= /usr/lib
-SYSLIBPATH.SunOS= /usr/lib
-SYSLIBPATH.AIX= /usr/lib
-SYSLIBPATH.SCO_SV= /usr/lib
-SYSLIBPATH= ${SYSLIBPATH.${OPSYS}:U${COMPILER_LIB_DIRS}}
-SUBST_VARS.policysh+= SYSLIBPATH
-
-.include "../../mk/dlopen.buildlink3.mk"
-.include "options.mk"
-
-.if ${MACHINE_PLATFORM} == "MirBSD"
-SUBST_CLASSES+= mirbsd-paths
-SUBST_STAGE.mirbsd-paths= pre-configure
-SUBST_FILES.mirbsd-paths= hints/mirbsd.sh
-SUBST_SED.mirbsd-paths= -e 's,/usr/mpkg,${PREFIX},g'
-SUBST_MESSAGE.mirbsd-paths= Do not use non-pkgsrc paths on MirBSD.
-.endif
-
-# Replace our perl as the interpreter
-REPLACE_PERL+= cpan/Config-Perl-V/V.pm
-REPLACE_PERL+= cpan/Getopt-Long/lib/Getopt/Long.pm
-REPLACE_PERL+= cpan/version/lib/version.pm
-REPLACE_PERL+= dist/ExtUtils-ParseXS/lib/ExtUtils/xsubpp
-REPLACE_PERL+= ext/ExtUtils-Miniperl/lib/ExtUtils/Miniperl.pm
-REPLACE_PERL+= ext/File-DosGlob/lib/File/DosGlob.pm
-REPLACE_PERL+= lib/unicore/mktables
-
-.if ${PKGSRC_COMPILER:Mxlc}
-SUBST_CLASSES+= cpprun
-SUBST_STAGE.cpprun= pre-install
-SUBST_FILES.cpprun= lib/Config_heavy.pl
-. if !empty(PKG_OPTIONS:Mthreads)
-SUBST_SED.cpprun= -e "s/cpprun=''/cpprun='cc_r -E'/"
-. else
-SUBST_SED.cpprun= -e "s/cpprun=''/cpprun='cc -E'/"
-. endif
-.endif
-
-# Some platforms may want the directory mode not to be 0755. This
-# is, unfortunately, hardcoded in quite a few places in Perl, so
-# let's substitute what pkgsrc says instead.
-#
-SUBST_CLASSES+= dirmode
-SUBST_STAGE.dirmode= pre-configure
-SUBST_FILES.dirmode= install_lib.pl
-SUBST_SED.dirmode= -e "s/755/${PKGDIRMODE}/g;/umask(/d"
-
-post-extract:
- ${CP} ${FILESDIR}/Policy.sh ${WRKSRC}/Policy.sh
-
-pre-configure:
- ${FIND} ${WRKSRC} -name "*.orig" -type f -exec rm -f {} \;
-
-post-build:
- ${SED} -e "s,@PERL5@,"${PERL5:Q}",g" \
- -e "s,@SH@,"${SH:Q}",g" \
- -e "s,@PKGMANDIR@,"${PKGMANDIR}",g" \
- ${FILESDIR}/perllink.in > ${WRKDIR}/perllink.sh
-
-INSTALLATION_DIRS= bin ${PKGMANDIR}/man1
-PERL5_PACKLIST_DIR_cmd= . ${WRKSRC}/config.sh; echo $$installarchlib
-PERL5_PACKLIST_DIR= ${PERL5_PACKLIST_DIR_cmd:sh}
-PERL5_PACKLIST= .packlist
-PERL5_PACKLIST_DESTDIR= no
-FILES_SUBST+= PERL5_COMMENT=\#
-FILES_SUBST+= PERL5_PACKLIST=
-
-.PHONY: perl5-post-install
-post-install: perl5-post-install
-perl5-post-install:
- ${RUN}if ${TEST} -x ${DESTDIR}${PREFIX}/bin/a2p; then \
- strip ${DESTDIR}${PREFIX}/bin/a2p; \
- fi
- ${INSTALL_SCRIPT} ${WRKDIR}/perllink.sh \
- ${DESTDIR}${PERL5_PERLBASE}/bin/perllink
- ${INSTALL_MAN} ${FILESDIR}/perllink.1 \
- ${DESTDIR}${PERL5_PERLBASE}/${PKGMANDIR}/man1/perllink.1
- ${RM} -f ${DESTDIR}${PREFIX}/bin/perllink \
- ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1/perllink.1
- ${LN} -s ${PERL5_PERLBASE}/bin/perllink \
- ${DESTDIR}${PREFIX}/bin/perllink
- ${LN} -s ${PERL5_PERLBASE}/${PKGMANDIR}/man1/perllink.1 \
- ${DESTDIR}${PREFIX}/${PKGMANDIR}/man1/perllink.1
-.if ${OPSYS} == "Haiku"
- ${CHMOD} a+x ${DESTDIR}${PREFIX}/bin/perl
-.endif
-
-.include "packlist.mk"
-.include "../../mk/bsd.pkg.mk"
diff --git a/perl5-devel/Makefile.common b/perl5-devel/Makefile.common
deleted file mode 100644
index efdbef4f47..0000000000
--- a/perl5-devel/Makefile.common
+++ /dev/null
@@ -1,14 +0,0 @@
-# $NetBSD: Makefile.common,v 1.45 2022/06/28 10:02:51 wiz Exp $
-#
-# used by lang/perl5/Makefile
-# used by databases/p5-gdbm/Makefile
-
-DISTNAME= perl-5.39.8
-CATEGORIES= lang devel perl5
-MASTER_SITES= ${MASTER_SITE_PERL_CPAN:S,/modules/by-module/$,/src/5.0/,}
-DISTFILES+= ${DISTNAME}${EXTRACT_SUFX}
-EXTRACT_SUFX= .tar.xz
-
-MAINTAINER= pkgsrc-users%NetBSD.org@localhost
-HOMEPAGE= https://www.perl.org/
-LICENSE= ${PERL5_LICENSE}
diff --git a/perl5-devel/PLIST b/perl5-devel/PLIST
deleted file mode 100644
index 7ab007d5e6..0000000000
--- a/perl5-devel/PLIST
+++ /dev/null
@@ -1,5 +0,0 @@
-@comment $NetBSD: PLIST,v 1.6 2012/11/02 07:29:30 sbd Exp $
-bin/perllink
-lib/perl5/bin/perllink
-lib/perl5/${PKGMANDIR}/man1/perllink.1
-man/man1/perllink.1
diff --git a/perl5-devel/buildlink3.mk b/perl5-devel/buildlink3.mk
deleted file mode 100644
index 8c09e3cb72..0000000000
--- a/perl5-devel/buildlink3.mk
+++ /dev/null
@@ -1,46 +0,0 @@
-# $NetBSD: buildlink3.mk,v 1.71 2022/06/28 10:02:51 wiz Exp $
-
-BUILDLINK_TREE+= perl
-
-.if !defined(PERL_BUILDLINK3_MK)
-PERL_BUILDLINK3_MK:=
-
-.include "../../mk/bsd.fast.prefs.mk"
-PERL5_REQD+= 5.38.0
-.for _perl5_ver_ in ${PERL5_REQD}
-BUILDLINK_API_DEPENDS.perl+= perl>=${_perl5_ver_}
-.endfor
-# Prevent p5-* etc. packages built for 5.38.0 to be used
-# with the next incompatible version of perl:
-BUILDLINK_API_DEPENDS.perl+= perl<5.40.0
-
-BUILDLINK_PKGSRCDIR.perl?= ../../lang/perl5
-
-_TOOLS_USE_PKGSRC.perl= yes
-
-# do not change this LOCALBASE to PREFIX; that breaks the install of perl modules
-PERL5= ${LOCALBASE}/bin/perl
-
-pkgbase := perl
-.include "../../mk/pkg-build-options.mk"
-
-.if ${PKG_BUILD_OPTIONS.perl:Mthreads}
-. include "../../mk/pthread.buildlink3.mk"
-.endif
-
-PERL5_OPTIONS?= # empty
-.if !empty(PERL5_OPTIONS:Mthreads)
-INSTALL_TEMPLATES+= ${.CURDIR}/../../lang/perl5/files/install_threads.tmpl
-.endif
-
-#
-# Perl keeps headers and odd libraries in an odd path not caught by the
-# default BUILDLINK_FILES_CMD, so name them to be symlinked into
-# ${BUILDLINK_DIR}.
-#
-.include "../../lang/perl5/vars.mk"
-BUILDLINK_FILES.perl= ${PERL5_SUB_INSTALLARCHLIB}/CORE/*
-BUILDLINK_RPATHDIRS.perl+= ${PERL5_SUB_INSTALLARCHLIB}/CORE
-.endif # PERL_BUILDLINK3_MK
-
-BUILDLINK_TREE+= -perl
diff --git a/perl5-devel/dirs.mk b/perl5-devel/dirs.mk
deleted file mode 100644
index 05a4e28838..0000000000
--- a/perl5-devel/dirs.mk
+++ /dev/null
@@ -1,41 +0,0 @@
-# $NetBSD: dirs.mk,v 1.2 2011/05/16 07:59:04 abs Exp $
-#
-# Provide typical required Perl directories
-
-.if !defined(_PERL5_DIRS_MK)
-_PERL5_DIRS_MK= # defined
-
-.include "../../mk/bsd.prefs.mk"
-
-PERL5_PREFIX= ${PREFIX}
-PERL5_VENDORPREFIX= ${PERL5_PREFIX}
-PERL5_SITEPREFIX?= ${PERL5_PREFIX}
-BUILD_DEFS+= PERL5_SITEPREFIX
-
-PERL5= ${PERL5_PREFIX}/bin/perl${PKGVERSION_NOREV}
-PERL5_PERLBASE= ${PERL5_PREFIX}/lib/perl5
-PERL5_VENDORBASE= ${PERL5_VENDORPREFIX}/lib/perl5/vendor_perl
-#
-# The unusual check for empty(PERL5_SITEPREFIX) is because ${PREFIX} isn't
-# defined until bsd.pkg.mk is included, so when we inspect its value at
-# this point, it's empty.
-#
-.if empty(PERL5_SITEPREFIX) || \
- !empty(PERL5_SITEPREFIX:M${LOCALBASE}) || \
- !empty(PERL5_SITEPREFIX:M${LOCALBASE}/*)
-PERL5_SITEBASE= ${PERL5_SITEPREFIX}/lib/perl5/site_perl
-.else
-PERL5_SITEBASE= ${PERL5_SITEPREFIX}
-.endif
-
-PERL5_SITEBIN?= ${PERL5_SITEBASE}/bin
-
-PERL5_PRIVLIB= ${PERL5_PERLBASE}/${PERL5_API_VERS}
-PERL5_VENDORLIB= ${PERL5_VENDORBASE}/${PERL5_API_VERS}
-.if !empty(PERL5_SITEBASE:M*lib/perl5/site_perl)
-PERL5_SITELIB= ${PERL5_SITEBASE}/${PERL5_API_VERS}
-.else
-PERL5_SITELIB= ${PERL5_SITEBASE}/lib/perl5/site_perl/${PERL5_API_VERS}
-.endif
-
-.endif
diff --git a/perl5-devel/distinfo b/perl5-devel/distinfo
deleted file mode 100644
index c9b851de7f..0000000000
--- a/perl5-devel/distinfo
+++ /dev/null
@@ -1,16 +0,0 @@
-$NetBSD: distinfo,v 1.177 2022/06/28 10:02:51 wiz Exp $
-
-BLAKE2s (perl-5.39.8.tar.xz) = e1357e4af374940e1d1a7a72dffa63fbaa3a3354dc864ea243a4ed51a79a8e56
-SHA512 (perl-5.39.8.tar.xz) = 4b1cb4ab5b551415017f5c9e5b175b2051965bbb0d6076b5c2da592efef4f6bc904508de8b9d03ba32716d790503eef9439cb097a39f182f8a0ee938b4236a7b
-Size (perl-5.39.8.tar.xz) = 13809128 bytes
-SHA1 (patch-Configure) = f3bd324a90254405b3ce8e29846b4ddc9ebf7d73
-SHA1 (patch-Makefile.SH) = 56203aea57c429a94760f039a978463b8859b0a9
-SHA1 (patch-caretx.c) = e9698f513b6fb5237b627d6a1a56153720654039
-SHA1 (patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__BeOS.pm) = 79e5aeccfa272ca5ec08bffc616d8053ae90ac51
-SHA1 (patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__Unix.pm) = 6171a21a24e3bea312155b1d5f692d76ef733d23
-SHA1 (patch-cpan_ExtUtils-MakeMaker_t_MM__BeOS.t) = 9b0e7ab85fdab4887b1754599a8879bd7d9f36cc
-SHA1 (patch-hints_cygwin.sh) = 1b21d927d6b7379754c4cd64a2b05d3632c35470
-SHA1 (patch-hints_linux.sh) = 4baa8f80695687abb53d4f4e1830cf86db5b2bf7
-SHA1 (patch-hints_netbsd.sh) = 0d549a48800372d75fe34b783529a78cba90f646
-SHA1 (patch-hints_solaris__2.sh) = 364a28ca57dbabe1f902b601e336532996db6a0e
-SHA1 (patch-installperl) = b129d64cc17b898b44fe6282b8b1df36e342d0ef
diff --git a/perl5-devel/files/Policy.sh b/perl5-devel/files/Policy.sh
deleted file mode 100644
index 64f388566d..0000000000
--- a/perl5-devel/files/Policy.sh
+++ /dev/null
@@ -1,124 +0,0 @@
-# $NetBSD: Policy.sh,v 1.6 2021/05/17 15:06:49 nia Exp $
-#
-# Site-wide policy settings for pkgsrc Perl
-#
-archname='@MACHINE_ARCH@-@LOWER_OPSYS@'
-cc='@CC@'
-ccflags='@CFLAGS@'
-ldflags='@LDFLAGS@'
-if $test -n "$ccflags"; then
- optimize="$ccflags"
-fi
-i_malloc='undef'
-installusrbinperl='undef'
-installstyle='lib/perl5'
-
-# Perl embeds the full paths to the following tools in several installed
-# files, so make sure the paths to the ones in ${TOOLS_DIR} aren't used.
-aphostname='@TOOLS_HOSTNAME_CMD@'
-ln='@TOOLS_LN@'
-lns='@TOOLS_LN@ -s'
-sed='@TOOLS_SED@'
-sh='@TOOLS_SH@'
-issymlink='@TOOLS_TEST@ -h'
-perl5='@FALSE@'
-
-# Installation directories for "perl", "vendor" and "site" bits.
-prefix='@PERL5_PREFIX@'
-siteprefix='@PERL5_SITEPREFIX@'
-vendorprefix='@PERL5_VENDORPREFIX@'
-
-# The Perl Configure script will install scripts into "*/script"
-# directories if they exist, so override with explicit settings.
-scriptdir='@PERL5_PERLBASE@/bin'
-sitescript='@PERL5_SITEBASE@/bin'
-vendorscript='@PERL5_VENDORBASE@/bin'
-
-# Put any compiled binaries into vendor- and site-specific locations to
-# avoid conflicts with each other. The perllink script will handle all
-# the appropriate symlinking.
-sitebin='@PERL5_SITEBIN@'
-vendorbin='@PERL5_VENDORBASE@/bin'
-
-# Put the API-specific files into API-specific directories instead
-# of the default version-specific directories.
-privlib='@PERL5_PRIVLIB@'
-sitelib='@PERL5_SITELIB@'
-vendorlib='@PERL5_VENDORLIB@'
-
-# Search for version-specific directories under these directories.
-sitelib_stem='@PERL5_SITEBASE@'
-vendorlib_stem='@PERL5_VENDORBASE@'
-
-# Avoid manpage conflicts between the standard Perl library, 3rd-party
-# modules, and other packages.
-man1ext='1'
-man1dir='@PERL5_PERLBASE@/@PKGMANDIR@/man1'
-siteman1dir='@PERL5_SITEBASE@/@PKGMANDIR@/man1'
-vendorman1dir='@PERL5_VENDORBASE@/@PKGMANDIR@/man1'
-man3ext='3'
-man3dir='@PERL5_PERLBASE@/@PKGMANDIR@/man3'
-siteman3dir='@PERL5_SITEBASE@/@PKGMANDIR@/man3'
-vendorman3dir='@PERL5_VENDORBASE@/@PKGMANDIR@/man3'
-
-# Nail down the needed libraries for each platform here to avoid hidden
-# dependencies. If this isn't defined, then use the perl defaults for the
-# particular operating system.
-if $test -n "@LIBSWANTED@"; then
- libswanted="@LIBSWANTED@ "
-fi
-
-# Add the pkgsrc-derived LDFLAGS for linking against pthreads to the
-# usethreads.cbu call-back script
-if $test -n "@PTHREAD_LDFLAGS@"; then
- cat >> UU/usethreads.cbu <<EOCBU
-
-# Add pkgsrc-derived ldflags to link with thread support.
-ldflags="@PTHREAD_LDFLAGS@ \$ldflags"
-lddlflags="@PTHREAD_LDFLAGS@ \$lddlflags"
-EOCBU
-fi
-
-# Generate a pkgsrc.cbu call-back script that sets the correct LDFLAGS
-# for linking against pkgsrc-installed libraries
-cat > UU/pkgsrc.cbu <<EOCBU
-# This script UU/pkgsrc.cbu will get 'called-back' by Configure
-# *after* all hints
-
-# XCOFF targets need the path specified where libperl.a resides.
-if $test "@OBJECT_FMT@" = "XCOFF"; then
- ldflags="@COMPILER_RPATH_FLAG@\${shrpdir} \$ldflags"
- lddlflags="@COMPILER_RPATH_FLAG@\${shrpdir} \$lddlflags"
- ccdlflags="@COMPILER_RPATH_FLAG@\${shrpdir} \$ccdlflags"
-fi
-
-# Set pkgsrc defaults for library and header search paths:
-# nail down the directories in which headers and libraries of
-# locally-installed software may be found.
-loclibpth="@LOCALBASE@/lib"
-locincpth="@LOCALBASE@/include"
-
-# Set pkgsrc defaults for "plateform"/general path used to
-# find libraries
-if $test -n "@SYSLIBPATH@"; then
- glibpth="@SYSLIBPATH@"
-fi
-
-# Strip /usr/local/lib... from ldflags
-case "\$ldflags" in */usr/local/lib*)
- set \`echo "X \$ldflags " | sed 's, [^ ]*/usr/local/lib[^ ]* , ,g'\`
- shift
- ldflags="\$*"
- ;;
-esac
-
-# Strip gdbm from libswanted
-case "\$libswanted" in *gdbm*)
- set \`echo "X \$libswanted " | sed 's, [^ ]*gdbm[^ ]* , ,g'\`
- shift
- libswanted="\$*"
-esac
-
-# (re)Set sed here so that sed _and_ full_sed are correctly *both* set
-sed='@TOOLS_SED@'
-EOCBU
diff --git a/perl5-devel/files/deinstall.tmpl b/perl5-devel/files/deinstall.tmpl
deleted file mode 100644
index 4280fed56d..0000000000
--- a/perl5-devel/files/deinstall.tmpl
+++ /dev/null
@@ -1,23 +0,0 @@
-# $NetBSD: deinstall.tmpl,v 1.3 2010/02/14 15:10:38 tron Exp $
-
-case ${STAGE} in
-DEINSTALL)
- eval `${PERL5} -V:prefix -V:archlib -V:scriptdir`
- PERL5_PACKLIST="@PERL5_PACKLIST@"
-
- # Remove the perllocal.pod file.
- case "$archlib" in
- $prefix/*) archlib="${PKG_PREFIX-@PREFIX@}/${archlib#$prefix/}" ;;
- esac
- ${RM} -f $archlib/perllocal.pod
- ${RMDIR} -p $archlib 2>/dev/null || ${TRUE}
-
- # Remove any symlinked bits that belong to this module.
- $scriptdir/perllink -f -p ${PKG_PREFIX-@PREFIX@} delete ${PERL5_PACKLIST}
-
- # If this is not the perl package, then re-link any perl bits
- # back into place.
- #
- @PERL5_COMMENT@$scriptdir/perllink -p ${PKG_PREFIX-@PREFIX@} add
- ;;
-esac
diff --git a/perl5-devel/files/install.tmpl b/perl5-devel/files/install.tmpl
deleted file mode 100644
index cc2ff4d69c..0000000000
--- a/perl5-devel/files/install.tmpl
+++ /dev/null
@@ -1,11 +0,0 @@
-# $NetBSD: install.tmpl,v 1.2 2005/08/12 19:59:03 jlam Exp $
-
-case ${STAGE} in
-POST-INSTALL)
- eval `${PERL5} -V:scriptdir`
- PERL5_PACKLIST="@PERL5_PACKLIST@"
-
- # Symlink the bits that belong to this module.
- $scriptdir/perllink -f -p ${PKG_PREFIX} add ${PERL5_PACKLIST}
- ;;
-esac
diff --git a/perl5-devel/files/install_threads.tmpl b/perl5-devel/files/install_threads.tmpl
deleted file mode 100644
index 6574aba7ff..0000000000
--- a/perl5-devel/files/install_threads.tmpl
+++ /dev/null
@@ -1,24 +0,0 @@
-# $NetBSD: install_threads.tmpl,v 1.2 2016/12/12 16:08:00 wiz Exp $
-#
-# Require the presence of a pkgsrc Perl installation that supports threads
-# during the PRE-INSTALL stage, otherwise we bail out.
-
-case ${STAGE} in
-PRE-INSTALL)
- if [ ! -x "${PERL5}" ]; then
- ${ECHO} "==> ${PERL5} does not exist." 1>&2
- exit 1
- fi
- eval `${PERL5} -V:usethreads`
- case $usethreads in
- define*|true|[yY]*) # possible "yes" values in Perl Config.pm
- # We found what we were looking for (a threaded perl) so
- # do nothing.
- ;;
- *)
- ${ECHO} "==> ${PKGNAME} requires a Perl that supports threads." 1>&2
- exit 1
- ;;
- esac
- ;;
-esac
diff --git a/perl5-devel/files/perllink.1 b/perl5-devel/files/perllink.1
deleted file mode 100644
index 5b1cfbf7d4..0000000000
--- a/perl5-devel/files/perllink.1
+++ /dev/null
@@ -1,125 +0,0 @@
-.\" $NetBSD: perllink.1,v 1.3 2010/03/21 16:29:40 wiz Exp $
-.\"
-.\" Copyright (c) 2005 The NetBSD Foundation, Inc.
-.\" All rights reserved.
-.\"
-.\" This code is derived from software contributed to The NetBSD Foundation
-.\" by Johnny C. Lam.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the NetBSD
-.\" Foundation, Inc. and its contributors.
-.\" 4. Neither the name of The NetBSD Foundation nor the names of its
-.\" contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-.\" POSSIBILITY OF SUCH DAMAGE.
-.\"
-.Dd July 15, 2005
-.Dt PERLLINK 1
-.Sh NAME
-.Nm perllink
-.Nd add and delete symlinks in the standard Perl installation
-.Sh SYNOPSIS
-.Nm perllink
-.Op Fl fnv
-.Op Fl p Ar prefix
-.Ar action
-.Op Ar packlist ...
-.Sh DESCRIPTION
-.Nm
-manages the symlinks that match the files listed in the given
-packlists.
-.Pp
-The perl configuration library defines the main directory trees
-containing the standard Perl installation in the following variables:
-.Bl -column -offset indent
-.It Va prefix
-.It Va siteprefix
-.It Va vendorprefix
-.El
-.Pp
-The perl configuration library also defines the locations of scripts
-and manual pages in the following variables:
-.Bl -column -offset indent ".Va vendorscript" ".Va vendorman1dir"
-.It Va scriptdir Ta Va man1dir
-.It Va sitescript Ta Va siteman1dir
-.It Va vendorscript Ta Va vendorman1dir
-.El
-.Pp
-For each file listed in the packlists that is in one of the script
-or manual page locations,
-a relative symbolic link to that file is added or deleted from
-. Va prefix Ns Pa /bin
-and
-. Va prefix Ns Pa /man/man1 .
-.Pp
-If
-.Fl p Ar prefix
-is specified, then the script and manual page locations are recomputed
-relative to the given
-.Ar prefix
-instead of to perl's
-.Va prefix ,
-and the symlinks are managed under the given
-.Ar prefix
-instead.
-.Pp
-The options are as follows:
-.Bl -tag -width indent
-.It Ar action
-This required option is either
-.Dq add
-or
-.Dq delete
-and determines
-whether the managed symlinks are added or deleted.
-.It Ar packlist ...
-These are paths to packlists containing the files installed as
-part of a module.
-Each line of a packlist contains a path terminated by a newline.
-If no packlists are specified, then the packlist for Perl itself
-is used.
-.It Fl f , -force
-Unlink any already existing files, permitting the new symlinks
-to replace the existing ones.
-.It Fl n , -noaction
-Do not actually make any changes to the files in
-.Ar prefix .
-.It Fl p Ar prefix , Fl -prefix= Ns Ar prefix
-Manage the symlinks in
-.Ar prefix .
-By default,
-.Nm
-manages the symlinks in the location referenced by the perl configuration
-variable
-.Va prefix .
-.It Fl v
-Be verbose.
-Display on standard error the shell-equivalent commands that
-are being executed.
-.El
-.Sh SEE ALSO
-.Xr perl 1 ,
-.Xr symlink 2
-.Sh AUTHORS
-.An Johnny C. Lam
diff --git a/perl5-devel/files/perllink.in b/perl5-devel/files/perllink.in
deleted file mode 100644
index bd0a9cbc3d..0000000000
--- a/perl5-devel/files/perllink.in
+++ /dev/null
@@ -1,205 +0,0 @@
-#!@SH@
-# $NetBSD: perllink.in,v 1.4 2012/03/04 10:26:57 tron Exp $
-#
-# Copyright (c) 2005 The NetBSD Foundation, Inc.
-# All rights reserved.
-#
-# This code is derived from software contributed to The NetBSD Foundation
-# by Johnny C. Lam.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by the NetBSD
-# Foundation, Inc. and its contributors.
-# 4. Neither the name of The NetBSD Foundation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-
-#
-# This script parses the packlists listed on the command line and either
-# adds or deletes the symlinks in
-#
-# <prefix>/bin
-# <prefix>/@PKGMANDIR@/man1
-#
-# that match the files in the packlists.
-#
-
-perlprog="@PERL5@"
-
-usage()
-{
- echo 1>&2 "usage: $0 [-fnv] [-p prefix] add|delete [packlist ...]"
- exit 1
-}
-
-opt_action=
-opt_force=
-opt_noaction=
-opt_prefix=
-opt_packlists=
-opt_verbose=
-
-while test $# -gt 0; do
- opt="$1"
- case "$opt" in
- -f|--force) opt_force=yes; shift ;;
- -n|--noaction) opt_noaction=yes; shift ;;
- -p) opt_prefix="$2"; shift; shift ;;
- --prefix=*) opt_prefix="${1#--prefix=}"; shift ;;
- -v|--verbose) opt_verbose=yes; shift ;;
- --) break; shift ;;
- -*) usage ;;
- [!-]*) break ;;
- esac
-done
-
-# We expect the action argument, as well as any packlists, to be left
-# in the argument list.
-#
-test $# -gt 0 || usage
-opt_action="$1"; shift
-
-# Get the values of various Config.pm values from perl.
-eval `$perlprog -V:prefix -V:scriptdir -V:man1dir -V:vendorprefix -V:vendorscript -V:vendorman1dir -V:siteprefix -V:sitescript -V:siteman1dir -V:archlib`
-
-# The remaining arguments, if any, are packlists.
-if test $# -gt 0; then
- opt_packlists="$@"
-elif test -f "$archlib/.packlist"; then
- opt_packlists="$archlib/.packlist"
-fi
-
-test -n "$opt_prefix" || opt_prefix="$prefix"
-
-pkgmandir="@PKGMANDIR@"
-
-# Re-point variables so that if they are under $prefix, then they are
-# recomputed to point under $opt_prefix.
-#
-case "$scriptdir" in
-$prefix/*) scriptdir="$opt_prefix/${scriptdir#$prefix/}" ;;
-"") scriptdir="$opt_prefix/bin" ;;
-esac
-case "$man1dir" in
-$prefix/*) man1dir="$opt_prefix/${man1dir#$prefix/}" ;;
-"") man1dir="$opt_prefix/$pkgmandir/man1" ;;
-esac
-case "$siteprefix" in
-$prefix/*) siteprefix="$opt_prefix/${siteprefix#$prefix/}" ;;
-"") siteprefix="$opt_prefix" ;;
-esac
-case "$sitescript" in
-$prefix/*) sitescript="$opt_prefix/${sitescript#$prefix/}" ;;
-"") sitescript="$scriptdir" ;;
-esac
-case "$siteman1dir" in
-$prefix/*) siteman1dir="$opt_prefix/${siteman1dir#$prefix/}" ;;
-"") siteman1dir="$man1dir" ;;
-esac
-case "$vendorprefix" in
-$prefix/*) vendorprefix="$opt_prefix/${vendorprefix#$prefix/}" ;;
-"") vendorprefix="$opt_prefix" ;;
-esac
-case "$vendorscript" in
-$prefix/*) vendorscript="$opt_prefix/${vendorscript#$prefix/}" ;;
-"") vendorscript="$scriptdir" ;;
-esac
-case "$vendorman1dir" in
-$prefix/*) vendorman1dir="$opt_prefix/${vendorman1dir#$prefix/}" ;;
-"") vendorman1dir="$man1dir" ;;
-esac
-
-destbindir="$opt_prefix/bin"
-destman1dir="$opt_prefix/$pkgmandir/man1"
-
-echo __dummy__ | $perlprog -pe '0' $opt_packlists |
-{ while read file junk; do
- if [ ! -f "$file" ] && [ -f "$file.gz" ]; then
- file="$file.gz"
- fi
-
- case "$file" in
- $scriptdir/*|$sitescript/*|$vendorscript/*) destdir="$destbindir" ;;
- $man1dir/*|$siteman1dir/*|$vendorman1dir/*) destdir="$destman1dir" ;;
- esac
-
- case "$file" in
- $scriptdir/*) dest="$destdir/${file#$scriptdir/}" ;;
- $sitescript/*) dest="$destdir/${file#$sitescript/}" ;;
- $vendorscript/*) dest="$destdir/${file#$vendorscript/}" ;;
- $man1dir/*) dest="$destdir/${file#$man1dir/}" ;;
- $siteman1dir/*) dest="$destdir/${file#$siteman1dir/}" ;;
- $vendorman1dir/*) dest="$destdir/${file#$vendorman1dir/}" ;;
- *) continue ;;
- esac
-
- test "$file" != "$dest" || continue
-
- # Set $src to be a relative symlink from $file into $destdir.
- file="${file#/}"
- destdir="${destdir#/}"
- while test "${file%%/*}" = "${destdir%%/*}"; do
- case "$file" in
- */*) file="${file#*/}" ;;
- *) file= ;;
- esac
- case "$destdir" in
- */*) destdir="${destdir#*/}" ;;
- *) destdir= ;;
- esac
- done
- src=""
- while test -n "$destdir"; do
- src="../$src"
- case "$destdir" in
- */*) destdir="${destdir#*/}" ;;
- *) destdir= ;;
- esac
- done
- src="$src$file"
-
- case "$opt_action" in
- add|delete)
- if test -n "$opt_force"; then
- test -z "$opt_verbose" || \
- echo "print STDERR \"rm $dest\\n\";"
- test -n "$opt_noaction" || \
- echo "unlink(\"$dest\");"
- fi
- ;;
- *)
- usage
- ;;
- esac
- case "$opt_action" in
- add)
- test -z "$opt_verbose" || \
- echo "print STDERR \"ln -s $src $dest\\n\";"
- test -n "$opt_noaction" || \
- echo "symlink(\"$src\", \"$dest\");"
- ;;
- esac
-done;
-echo "exit(0);"; } | $perlprog -w -
diff --git a/perl5-devel/hacks.mk b/perl5-devel/hacks.mk
deleted file mode 100644
index ef152a6090..0000000000
--- a/perl5-devel/hacks.mk
+++ /dev/null
@@ -1,60 +0,0 @@
-# $NetBSD: hacks.mk,v 1.26 2020/08/31 18:00:37 wiz Exp $
-
-.if !defined(PERL5_HACKS_MK)
-PERL5_HACKS_MK= defined
-
-.include "../../mk/compiler.mk"
-
-### [ Fri Oct 11 10:00:00 UTC 2011 : hauke ]
-###
-### On m68k, gcc creates short assembler branch insns, and expects
-### the assembler to adapt them to the distance. m68k gas appears not to
-### do that for fpu branch insns, resulting in an out-of-range FPU
-### assembler branch instruction error in "ext/re/re_exec.c".
-###
-### As a workaround, building with "-Os" instead of "-O2" reduces
-### the size of the object file enough to allow short branches.
-###
-### See PR toolchain/45439.
-
-.if ${OPSYS} == "NetBSD" && ${MACHINE_ARCH} == "m68k"
-PKG_HACKS+= m68k-codegen
-BUILDLINK_TRANSFORM+= opt:-O[0-9]*:-Os
-.endif
-
-### [Fri Jan 31 11:09:04 CST 2014 : schnoebe]
-### [Fri Oct 28 11:53:57 EDT 2016 : dholland - extended to gcc5]
-### gcc-[45].*.* in NetBSD/alpha causes unaligned access exception in perl.
-### -O works around, and there is a report that -O2 -fno-tree-ter is enough.
-.if (!empty(MACHINE_PLATFORM:MNetBSD-*-alpha) || !empty(MACHINE_PLATFORM:MOpenBSD-*-alpha)) \
- && !empty(CC_VERSION:Mgcc-[45].*.*)
-# XXX: is there any good way to replace the default -O2 with multiple args?
-PKG_HACKS+= alpha-optimisation
-#BUILDLINK_TRANSFORM+= opt:-O[2-9]*:-O2 -fno-tree-ter
-CFLAGS+= -fno-tree-ter
-.endif
-
-### [Thu May 14 23:17:20 JST 2015 : ryoon]
-### Force to use /usr/sfw/lib/amd64/libgcc_s.co.1 instead.
-.if ${MACHINE_PLATFORM} == SunOS-5.10-x86_64
-. if ${CC_VERSION} == gcc-3.4.3
-BUILDLINK_PASSTHRU_RPATHDIRS+= /usr/sfw/lib/amd64
-LDFLAGS+= ${COMPILER_RPATH_FLAG}/usr/sfw/lib/amd64
-. endif
-.endif
-
-### [Thu Aug 6 14:43:56 PDT 2015 : mrg]
-### On NetBSD/{mips,vax,sparc64}, the -freorder-blocks option in -O2
-### causes opmini.c to be miscompiled, and perl build fails.
-###
-.if !empty(CC_VERSION:Mgcc-4.5.*) && ${OPSYS} == "NetBSD"
-. if (${MACHINE_ARCH} == "vax" || \
- ${MACHINE_CPU} == "mips" || \
- ${MACHINE_ARCH} == "sparc" || \
- ${MACHINE_ARCH} == "sparc64")
-PKG_HACKS+= gcc-4.5-codegen
-CFLAGS+= -fno-reorder-blocks
-. endif
-.endif
-
-.endif # PERL5_HACKS_MK
diff --git a/perl5-devel/license.mk b/perl5-devel/license.mk
deleted file mode 100644
index 74a314c80d..0000000000
--- a/perl5-devel/license.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-# $NetBSD: license.mk,v 1.2 2009/07/17 06:44:46 sno Exp $
-#
-# This Makefile fragment is intended to be included by packages that build
-# and install perl5 modules and by the perl5 package.
-#
-# The following variables may be set prior to including this file:
-#
-# PERL5_LICENSE If set, it'll not overwritten with gnu-gpl-v2.
-# Allowed values: gnu-gpl-v2 and artistic until
-# pkgsrc can handle dual licenses correctly.
-#
-PERL5_LICENSE?= gnu-gpl-v2 OR artistic
diff --git a/perl5-devel/module.mk b/perl5-devel/module.mk
deleted file mode 100644
index de49e3ee6e..0000000000
--- a/perl5-devel/module.mk
+++ /dev/null
@@ -1,239 +0,0 @@
-# $NetBSD: module.mk,v 1.75 2020/08/31 18:00:37 wiz Exp $
-#
-# This Makefile fragment is intended to be included by packages that build
-# and install perl5 modules.
-#
-# The following targets are provided by this file:
-#
-# perl5-configure runs the standard perl configuration in
-# each of the directories specified in
-# ${PERL5_CONFIGURE_DIRS}.
-#
-# do-configure runs the perl5-configure target; if PERL5_CONFIGURE
-# is set to "YES", then this target overrides the
-# default do-configure provided by bsd.pkg.mk.
-#
-# The following variables may be set prior to including this file:
-#
-# PERL5_CONFIGURE if "YES", then for do-configure, run the standard
-# perl configuration assuming Makefile.PL exists;
-# defaults to "YES".
-#
-# PERL5_CONFIGURE_DIRS list of directories in which to run the
-# standard perl configuration; defaults to
-# ${CONFIGURE_DIRS}.
-#
-# PERL5_LDFLAGS extra linker flags to pass on to the build
-# process.
-#
-# PERL5_MODULE_TYPE "MakeMaker", "Module::Build", "Module::Build::Bundled",
-# "Module::Build::Tiny", "Module::Install", or
-# "Module::Install::Bundled" depending on which framework
-# is used to build/install the module.
-#
-# See also:
-# PERL5_PACKLIST
-#
-# Keywords: perl perl5
-
-.include "../../lang/perl5/license.mk"
-
-.if !defined(PERL5_MODULE_MK)
-PERL5_MODULE_MK= # defined
-
-.include "../../mk/bsd.prefs.mk"
-
-PERL5_MODULE_TYPE?= MakeMaker
-
-.if (${PERL5_MODULE_TYPE} != "MakeMaker") && \
- (${PERL5_MODULE_TYPE} != "Module::Build") && \
- (${PERL5_MODULE_TYPE} != "Module::Build::Bundled") && \
- (${PERL5_MODULE_TYPE} != "Module::Build::Tiny") && \
- (${PERL5_MODULE_TYPE} != "Module::Install") && \
- (${PERL5_MODULE_TYPE} != "Module::Install::Bundled")
-PKG_FAIL_REASON+= "\`\`${PERL5_MODULE_TYPE}'' is not a supported PERL5_MODULE_TYPE."
-.endif
-
-# Default test target for Perl modules
-TEST_TARGET?= test
-
-.include "../../mk/compiler.mk"
-
-.if ${PERL5_MODULE_TYPE} == "Module::Build" || \
- ${PERL5_MODULE_TYPE} == "Module::Build::Bundled" || \
- ${PERL5_MODULE_TYPE} == "Module::Build::Tiny"
-PERL5_MODTYPE= modbuild
-PERL5_MODBUILD_DESTDIR_OPTION= --destdir ${DESTDIR:Q}
-.elif ${PERL5_MODULE_TYPE} == "Module::Install" || \
- ${PERL5_MODULE_TYPE} == "Module::Install::Bundled"
-PERL5_MODTYPE= modinst
-.elif ${PERL5_MODULE_TYPE} == "MakeMaker"
-PERL5_MODTYPE= makemaker
-.endif
-
-
-###########################################################################
-###
-### Add the proper dependencies for using the specified module build
-### system.
-###
-
-BUILDLINK_DEPMETHOD.perl+= full
-.include "../../lang/perl5/buildlink3.mk"
-
-.if ${PKGPATH} != devel/p5-Module-Build && \
- (${PERL5_MODULE_TYPE} == "Module::Build")
-TOOL_DEPENDS+= p5-Module-Build>=0.42050:../../devel/p5-Module-Build
-.endif
-
-.if ${PKGPATH} != devel/p5-Module-Build-Tiny && \
- (${PERL5_MODULE_TYPE} == "Module::Build::Tiny")
-TOOL_DEPENDS+= p5-Module-Build-Tiny>=0.23:../../devel/p5-Module-Build-Tiny
-.endif
-
-.if ${PKGPATH} != devel/p5-Module-Install && \
- (${PERL5_MODULE_TYPE} == "Module::Install")
-TOOL_DEPENDS+= p5-Module-Install>=0.91:../../devel/p5-Module-Install
-.endif
-
-
-###########################################################################
-###
-### Target definitions (configure, build, install, etc.)
-###
-
-PERL5_CONFIGURE?= yes
-PERL5_CONFIGURE_DIRS?= ${CONFIGURE_DIRS}
-
-MAKE_ENV+= LC_ALL=C
-MAKE_ENV+= PERL_MM_USE_DEFAULT=1
-
-# All pkgsrc-installed Perl modules are installed into the "vendor"
-# directories.
-#
-MAKE_PARAMS.makemaker+= INSTALLDIRS=vendor
-MAKE_PARAMS.modbuild+= --installdirs=vendor
-MAKE_PARAMS.modinst+= installdirs=vendor
-
-MAKE_PARAMS+= ${MAKE_PARAMS.${PERL5_MODTYPE}}
-
-.PHONY: do-makemaker-configure
-do-makemaker-configure:
- ${RUN} \
- for dir in ${PERL5_CONFIGURE_DIRS}; do \
- cd ${WRKSRC}; \
- if ${TEST} -f "$$dir"/Makefile.PL; then \
- cd "$$dir"; \
- ${SETENV} ${MAKE_ENV} \
- ${BUILDLINK_PREFIX.perl}/bin/perl Makefile.PL ${MAKE_PARAMS}; \
- fi; \
- done
-
-.PHONY: do-modbuild-configure
-do-modbuild-configure:
- ${RUN} \
- for dir in ${PERL5_CONFIGURE_DIRS}; do \
- cd ${WRKSRC}; \
- if ${TEST} -f "$$dir"/Build.PL; then \
- cd "$$dir"; \
- ${SETENV} ${MAKE_ENV} \
- ${BUILDLINK_PREFIX.perl}/bin/perl Build.PL ${MAKE_PARAMS}; \
- fi; \
- done
-
-.PHONY: do-modinst-configure
-do-modinst-configure:
-.if ${PERL5_MODULE_TYPE} == "Module::Install"
- ${RUN} \
- for dir in ${PERL5_CONFIGURE_DIRS}; do \
- cd ${WRKSRC}; \
- if ${TEST} -d "$$dir"/inc/Module; then \
- ${RM} -rf "$$dir"/inc/Module; \
- fi; \
- if ${TEST} -f "$$dir"/Makefile.PL; then \
- cd "$$dir"; \
- ${SETENV} ${MAKE_ENV} \
- ${BUILDLINK_PREFIX.perl}/bin/perl Makefile.PL --skipdeps ${MAKE_PARAMS}; \
- fi; \
- done
-.else
- ${RUN} \
- for dir in ${PERL5_CONFIGURE_DIRS}; do \
- cd ${WRKSRC}; \
- if ${TEST} -f "$$dir"/Makefile.PL; then \
- cd "$$dir"; \
- ${SETENV} ${MAKE_ENV} \
- ${BUILDLINK_PREFIX.perl}/bin/perl Makefile.PL --skipdeps ${MAKE_PARAMS}; \
- fi; \
- done
-.endif
-
-.PHONY: perl5-configure
-perl5-configure: do-${PERL5_MODTYPE}-configure
-
-.if !empty(PERL5_CONFIGURE:M[yY][eE][sS])
-do-configure: perl5-configure
-.endif
-
-.PHONY: do-modbuild-build
-do-modbuild-build:
- cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ./Build ${BUILD_PARAMS}
-
-.PHONY: do-modbuild-test
-do-modbuild-test:
- cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ./Build test ${BUILD_PARAMS}
-
-.PHONY: do-modbuild-install
-do-modbuild-install:
- cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ./Build install ${PERL5_MODBUILD_DESTDIR_OPTION} ${BUILD_PARAMS}
-
-.if target(do-${PERL5_MODTYPE}-build) && !defined(NO_BUILD)
-do-build: do-${PERL5_MODTYPE}-build
-do-test: do-${PERL5_MODTYPE}-test
-.endif
-.if target(do-${PERL5_MODTYPE}-install)
-do-install: do-${PERL5_MODTYPE}-install
-.endif
-
-
-###########################################################################
-###
-### Make variable overrides
-###
-
-# MakeMaker provides two hooks, OPTIMIZE and OTHERLDFLAGS, to
-# customize the arguments passed to the preprocessor and linker,
-# respectively.
-#
-PERL5_MAKE_FLAGS.makemaker+= OPTIMIZE=${CFLAGS:Q}" "${CPPFLAGS:Q}
-.if ${OBJECT_FMT} == "a.out"
-PERL5_MAKE_FLAGS.makemaker+= OTHERLDFLAGS=${LDFLAGS:S/-Wl,//g:Q}
-.else
-PERL5_MAKE_FLAGS.makemaker+= OTHERLDFLAGS=${LDFLAGS:Q}
-.endif
-
-# Repoint all of the vendor-specific variables to be under the perl5
-# module's ${PREFIX}.
-#
-.include "../../lang/perl5/vars.mk"
-.for _var_ in ${_PERL5_VARS}
-PERL5_MAKE_FLAGS.makemaker+= ${_var_}=${PERL5_${_var_}:Q}
-.endfor
-#
-# The PREFIX in the generated Makefile will point to ${PERL5_PREFIX},
-# so override its value to the module's ${PREFIX}.
-# Also, set VENDORARCHEXP, so existing .packlist won't be read.
-#
-PERL5_MAKE_FLAGS.makemaker+= PREFIX=${PREFIX:Q} VENDORARCHEXP=${DESTDIR}${PERL5_INSTALLVENDORARCH}
-
-PERL5_MAKE_FLAGS+= ${PERL5_MAKE_FLAGS.${PERL5_MODTYPE}}
-MAKE_FLAGS+= ${PERL5_MAKE_FLAGS}
-
-.if defined(PERL5_LDFLAGS) && !empty(PERL5_LDFLAGS)
-#FIX_RPATH+= PERL5_LDFLAGS
-LDFLAGS+= ${PERL5_LDFLAGS}
-.endif
-
-.include "../../lang/perl5/packlist.mk"
-
-.endif # PERL5_MODULE_MK
diff --git a/perl5-devel/options.mk b/perl5-devel/options.mk
deleted file mode 100644
index 5f036fd736..0000000000
--- a/perl5-devel/options.mk
+++ /dev/null
@@ -1,100 +0,0 @@
-# $NetBSD: options.mk,v 1.17 2021/11/29 16:26:36 jperkin Exp $
-
-PKG_OPTIONS_VAR= PKG_OPTIONS.perl
-PKG_OPTIONS_REQUIRED_GROUPS= perlbits
-PKG_OPTIONS_GROUP.perlbits= perl-64bitauto perl-64bitint perl-64bitmore perl-64bitall perl-64bitnone
-PKG_SUPPORTED_OPTIONS= debug dtrace threads mstats
-
-CHECK_BUILTIN.pthread:= yes
-.include "../../mk/pthread.builtin.mk"
-CHECK_BUILTIN.pthread:= no
-
-# By default, build with threads only if the threads are native.
-.if ${USE_BUILTIN.pthread:tl} == yes
-PERL5_BUILD_THREADS_SUPPORT= yes
-.else
-PERL5_BUILD_THREADS_SUPPORT= ${DLOPEN_REQUIRE_PTHREADS}
-.endif
-
-### from KNOWN PROBLEMS in README.haiku
-### Perl cannot be compiled with threading support ATM.
-###
-.if !empty(MACHINE_PLATFORM:MHaiku-*-*)
-PERL5_BUILD_THREADS_SUPPORT= no
-.endif
-
-# miniperl fails with locking errors during build on QNX.
-.if ${OPSYS} == "QNX"
-PERL5_BUILD_THREADS_SUPPORT= no
-.endif
-
-.if !empty(PERL5_BUILD_THREADS_SUPPORT:M[yY][eE][sS])
-PKG_SUGGESTED_OPTIONS= threads
-.endif
-
-.if ${OPSYS} == "IRIX"
-. if defined(ABI) && ${ABI} == "64"
-PKG_SUGGESTED_OPTIONS+= perl-64bitint
-. endif
-.elif ${OPSYS} == "AIX"
-. if defined(ABI) && ${ABI} == "64"
-PKG_SUGGESTED_OPTIONS+= perl-64bitall
-. else
-PKG_SUGGESTED_OPTIONS+= perl-64bitnone
-. endif
-.else
-PKG_SUGGESTED_OPTIONS+= perl-64bitauto
-.endif
-
-.if (${OPSYS} == "SunOS" && ${OPSYS_VERSION} >= 051100) || \
- (${OPSYS} == "Darwin" && ${OPSYS_VERSION} >= 100500)
-PKG_SUGGESTED_OPTIONS+= dtrace
-.endif
-
-.include "../../mk/bsd.options.mk"
-
-.if !empty(PKG_OPTIONS:Mthreads)
-. include "../../mk/pthread.buildlink3.mk"
-CONFIGURE_ARGS+= -Duseithreads
-CFLAGS+= ${PTHREAD_CFLAGS}
-LDFLAGS+= ${PTHREAD_LDFLAGS}
-LIBSWANTED+= ${PTHREAD_LIBS:M-l*:S/^-l//}
-. if ${OBJECT_FMT} == "XCOFF"
-PERL5_RPATH_THREAD=-thread
-. endif
-.else
-CONFIGURE_ARGS+= -Uuseithreads
-. if ${OBJECT_FMT} == "XCOFF"
-PERL5_RPATH_THREAD=
-. endif
-.endif
-
-.if !empty(PKG_OPTIONS:Mdebug)
-CFLAGS+= -DDEBUGGING
-.endif
-
-.if !empty(PKG_OPTIONS:Mdtrace)
-CONFIGURE_ARGS+= -Dusedtrace
-.endif
-
-.if !empty(PKG_OPTIONS:Mmstats)
-CFLAGS+= -DPERL_DEBUGGING_MSTATS
-CONFIGURE_ARGS+= -Dusemymalloc
-.else
-CONFIGURE_ARGS+= -Uusemymalloc
-.endif
-
-.if !empty(PKG_OPTIONS:Mperl-64bitint)
-CONFIGURE_ARGS+= -Duse64bitint
-.elif !empty(PKG_OPTIONS:Mperl-64bitmore)
-CONFIGURE_ARGS+= -Dusemorebits
-.elif !empty(PKG_OPTIONS:Mperl-64bitall)
-CONFIGURE_ARGS+= -Duse64bitall
-.elif !empty(PKG_OPTIONS:Mperl-64bitnone)
-CONFIGURE_ARGS+= -Uuse64bitall -Uusemorebits -Uuse64bitint
-.else
-. if ${OBJECT_FMT} == "XCOFF"
-BROKEN= "XCOFF targets need the path specified where libperl.a resides."
-BROKEN+= "Please choose on of perl-64bitint perl-64bitmore perl-64bitall or perl-64bitnone to allow this."
-. endif
-.endif
diff --git a/perl5-devel/packlist.mk b/perl5-devel/packlist.mk
deleted file mode 100644
index 340bf77466..0000000000
--- a/perl5-devel/packlist.mk
+++ /dev/null
@@ -1,129 +0,0 @@
-# $NetBSD: packlist.mk,v 1.21 2019/11/03 19:04:05 rillig Exp $
-#
-# This Makefile fragment is intended to be included by packages that
-# create packlist files. This file is automatically included by
-# perl5/module.mk, so it is typically not necessary to include this
-# file.
-#
-# The following variables should be set prior to including this file:
-#
-# PERL5_USE_PACKLIST
-# When set to "yes" (the default), automatically generates the
-# PLIST for the pkgsrc package from the Perl packlist.
-#
-# PERL5_PACKLIST_DIR
-# The "install*arch" directory under which packlist files are
-# installed. Only needs to be overridden in very special cases.
-#
-# Default: ${PERL5_INSTALLVENDORARCH}
-#
-# PERL5_PACKLIST
-# The list of packlist files relative to ${PERL5_PACKLIST_DIR}.
-#
-# Example: .auto/Text/Trim/.packlist
-
-.if !defined(_PERL5_PACKLIST_MK)
-_PERL5_PACKLIST_MK= # defined
-
-.include "../../mk/bsd.prefs.mk"
-
-PERL5_USE_PACKLIST?= yes
-.if ${PERL5_USE_PACKLIST:tl} == yes
-# XXX: still experimental, but many packages already work
-#PERL5_PACKLIST?= auto/${DISTNAME:C/-[0-9].*$//:C,-,/,g}/.packlist
-.endif
-
-PERL5_PACKLIST_DESTDIR?= yes
-
-.if defined(PERL5_PACKLIST)
-PERL5_PACKLIST_DIR?= ${PERL5_INSTALLVENDORARCH}
-_PERL5_REAL_PACKLIST= ${PERL5_PACKLIST:S/^/${PERL5_PACKLIST_DIR}\//}
-_PERL5_PACKLIST= ${_PERL5_REAL_PACKLIST:S/^/${DESTDIR}/}
-.endif
-
-###########################################################################
-###
-### INSTALL/DEINSTALL scripts to manage symlinks
-###
-
-INSTALL_TEMPLATES+= ${.CURDIR}/../../lang/perl5/files/install.tmpl
-DEINSTALL_TEMPLATES+= ${.CURDIR}/../../lang/perl5/files/deinstall.tmpl
-FILES_SUBST+= PERL5_COMMENT=
-FILES_SUBST+= PERL5_PACKLIST=${_PERL5_REAL_PACKLIST:Q}
-
-
-###########################################################################
-###
-### Packlist -> PLIST generation
-###
-
-# Generate the PLIST from the files listed in PERL5_PACKLIST.
-.if defined(_PERL5_PACKLIST)
-PERL5_PLIST_COMMENT_CMD= \
- { ${ECHO} "@comment The following lines are automatically generated"; \
- ${ECHO} "@comment from the installed .packlist files."; }
-PERL5_PLIST_FILES_CMD= \
- { ${CAT} ${_PERL5_PACKLIST}; for f in ${_PERL5_REAL_PACKLIST}; do ${TEST} ! -f "${DESTDIR}$$f" || ${ECHO} "$$f"; done; } \
- | ${SED} -e "s,[ ].*,," -e "s,/\\./,/,g" -e "s,${PREFIX}/,," \
- | ${SORT} -u
-PERL5_GENERATE_PLIST= ${PERL5_PLIST_COMMENT_CMD}; \
- ${PERL5_PLIST_FILES_CMD};
-GENERATE_PLIST+= ${PERL5_GENERATE_PLIST}
-.endif
-
-###########################################################################
-###
-### Packlist DESTDIR handling -- strip off the DESTDIR from each entry.
-###
-
-.if !empty(PERL5_PACKLIST_DESTDIR:M[Yy][Ee][Ss])
-_PERL5_PACKLIST_AWK_STRIP_DESTDIR= \
- BEGIN { destdir = "${DESTDIR}"; \
- gsub(/\/\//, "/", destdir); \
- len_destdir = length(destdir); } \
- { if (index($$1, destdir) == 1) \
- $$1 = substr($$1, len_destdir + 1) }
-.else
-_PERL5_PACKLIST_AWK_STRIP_DESTDIR=
-.endif
-
-###########################################################################
-###
-### Packlist MANZ handling -- modify the .packlist so that it properly
-### records either compressed or uncompressed manpages depending on
-### how pkgsrc modifies them after installation.
-###
-
-_PERL5_PACKLIST_MANPAGE_RE= \
- ^(\/[^ \/]*)+\/(man[1-9ln]\/[^ \/]*\.[1-9ln]|cat[1-9ln]\/[^ \/]*\.[0-9])$$
-
-_PERL5_PACKLIST_AWK_STRIP_MANZ= \
- /${_PERL5_PACKLIST_MANPAGE_RE}\.gz/ \
- { $$1 = substr($$1, 1, length($$1) - 3); }
-
-_PERL5_PACKLIST_AWK_ADD_MANZ.no= # empty
-_PERL5_PACKLIST_AWK_ADD_MANZ.yes= \
- /${_PERL5_PACKLIST_MANPAGE_RE}/ { $$1 = $$1 ".gz"; }
-
-.if defined(_PERL5_PACKLIST)
-post-install: perl-packlist
-.endif
-
-.PHONY: perl-packlist
-perl-packlist:
- ${RUN} \
- ${TEST} -n ${_PERL5_PACKLIST:Q}"" || exit 0; \
- for file in ${_PERL5_PACKLIST}; do \
- if ${TEST} ! -f "$$file"; then \
- ${ECHO} 1>&2 "Perl packlist $$file is missing."; \
- exit 1; \
- fi; \
- ${AWK} '${_PERL5_PACKLIST_AWK_STRIP_DESTDIR} \
- ${_PERL5_PACKLIST_AWK_STRIP_MANZ} \
- ${_PERL5_PACKLIST_AWK_ADD_MANZ.${_MANZ}} \
- { print $$0 }' \
- $$file > $$file.new; \
- ${MV} -f $$file.new $$file; \
- done
-
-.endif # _PERL5_PACKLIST_MK
diff --git a/perl5-devel/patches/patch-Configure b/perl5-devel/patches/patch-Configure
deleted file mode 100644
index 740ae11795..0000000000
--- a/perl5-devel/patches/patch-Configure
+++ /dev/null
@@ -1,223 +0,0 @@
-$NetBSD: patch-Configure,v 1.11 2021/05/24 17:46:25 wiz Exp $
-
-* Use "uname -r" to get OS version for *BSD.
-* Move $loclibpth to the end of $dlist, instead of the beginning.
-* Detect systems which have <fenv.h> but where using it fails.
-* Honor more ldflags in shared objects.
-* Add Minix
-* Several other changes.
-* Add rpath for QNX
-
---- Configure.orig 2022-12-20 12:11:59.000000000 +0000
-+++ Configure
-@@ -3515,7 +3515,8 @@ EOM
- osvers=`echo "$4"|sed 's/^v//'`
- ;;
- freebsd) osname=freebsd
-- osvers="$3" ;;
-+ osvers=`$uname -r | UU/tr '[A-Z]' '[a-z]'`
-+ ;;
- genix) osname=genix ;;
- gnu) osname=gnu
- osvers="$3" ;;
-@@ -3537,11 +3538,11 @@ EOM
- ;;
- MiNT) osname=mint
- ;;
-- minix) osname=minix
-+ minix*) osname=minix
- osvers=`$uname -r`
- ;;
- netbsd*) osname=netbsd
-- osvers="$3"
-+ osvers=`$uname -r | UU/tr '[A-Z]' '[a-z]'`
- ;;
- news-os) osvers="$3"
- case "$3" in
-@@ -3551,7 +3552,7 @@ EOM
- ;;
- nonstop-ux) osname=nonstopux ;;
- openbsd) osname=openbsd
-- osvers="$3"
-+ osvers=`$uname -r | UU/tr '[A-Z]' '[a-z]'`
- ;;
- os2) osname=os2
- osvers="$4"
-@@ -3566,6 +3567,9 @@ EOM
- qnx) osname=qnx
- osvers="$4"
- ;;
-+ sco_sv) osname=sco_sv
-+ osvers=`$uname -r`v`$uname -v`
-+ ;;
- solaris) osname=solaris
- case "$3" in
- 5*) osvers=`echo $3 | $sed 's/^5/2/g'` ;;
-@@ -4943,7 +4947,7 @@ esac
- # If using gcc or clang, we can get better values for libpth, incpth
- # and usrinc directly from the compiler.
- # Note that ccname for clang is also gcc.
--case "$ccname" in
-+case "xx$ccname" in
- gcc)
- realpath=`which realpath 2>/dev/null | sed 's/no realpath in.*//'`
- $echo 'extern int foo;' > try.c
-@@ -5027,14 +5031,14 @@ case "$plibpth" in
- esac
- case "$libpth" in
- ' ') dlist='';;
--'') dlist="$loclibpth $plibpth $glibpth";;
-+'') dlist="$plibpth $glibpth $loclibpth";;
- *) dlist="$libpth";;
- esac
-
- : Now check and see which directories actually exist, avoiding duplicates
- for xxx in $dlist
- do
-- if $test -d $xxx; then
-+ if $test -d $xxx -o "$xxx" = "$prefix/lib"; then
- case " $libpth " in
- *" $xxx "*) ;;
- *) libpth="$libpth $xxx";;
-@@ -5150,7 +5154,7 @@ lib_ext=$_a
- obj_ext=$_o
- path_sep=$p_
-
--rm_try="$rm -f try try$_exe a.out .out try.[cho] try.$_o core core.try* try.core*"
-+rm_try="@TOOLS_RM@ -f try try$_exe a.out .out try.[cho] try.$_o core core.try* try.core*"
-
- : Which makefile gets called first. This is used by make depend.
- case "$firstmakefile" in
-@@ -5493,7 +5497,7 @@ default|recommended)
- *-fno-stack-protector*)
- echo "Do not add -fstack-protector nor -fstack-protector-strong" 2>&1
- ;;
-- *) case "$gccversion" in
-+ nothing) case "$gccversion" in
- ?*) set stack-protector-strong -fstack-protector-strong
- eval $checkccflag
- case "$dflt" in
-@@ -6476,6 +6480,15 @@ case "$nm_so_opt" in
- ;;
- esac
-
-+: Mac OS X 10.7 is different
-+case "$osname" in
-+ darwin)
-+ case "$osvers" in
-+ 11.*)
-+ libnames="$libnames /usr/lib/system/libsystem_*.dylib"
-+ esac
-+esac
-+
- : Figure out where the libc is located
- case "$runnm" in
- true)
-@@ -7656,7 +7669,9 @@ rp='Pathname for the site-specific libra
- . ./getfile
- prefixvar=sitelib
- . ./setprefixvar
--sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
-+if $test -z "$sitelib_stem"; then
-+ sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
-+fi
-
- : Determine list of previous versions to include in @INC
- $cat > getverlist <<EOPL
-@@ -8069,7 +8084,9 @@ case "$vendorprefix" in
- vendorlibexp="$ansexp"
- ;;
- esac
--vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
-+if $test -z "$vendorlib_stem"; then
-+ vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
-+fi
- prefixvar=vendorlib
- . ./installprefix
-
-@@ -8569,6 +8586,7 @@ EOM
- esac
- ;;
- *linux*|irix*|gnu*) dflt="-shared $optimize" ;;
-+ sco_sv) dflt='-shared' ;;
- solaris) # See [perl #66604].
- # On Solaris 11, gcc -m64 on amd64
- # appears not to understand -G. gcc versions at
-@@ -8608,7 +8626,7 @@ EOM
- esac
- for thisflag in $ldflags; do
- case "$thisflag" in
-- -L*|-R*|-Wl,-R*)
-+ -L*|-R*|-Wl,-R*|-Wl,-z*)
- case " $dflt " in
- *" $thisflag "*) ;;
- *) dflt="$dflt $thisflag" ;;
-@@ -8864,7 +8882,7 @@ if "$useshrplib"; then
- freebsd|minix|mirbsd|netbsd|openbsd|interix|dragonfly|bitrig)
- xxx="-Wl,-R$shrpdir"
- ;;
-- bsdos|linux|irix*|dec_osf|gnu*|haiku)
-+ bsdos|linux|irix*|dec_osf|gnu*|haiku|nto)
- xxx="-Wl,-rpath,$shrpdir"
- ;;
- hpux*)
-@@ -8874,6 +8892,9 @@ if "$useshrplib"; then
- cygwin)
- # cygwin needs only ldlibpth
- ;;
-+ sco_sv)
-+ xxx="-Wl,-R$shrpdir"
-+ ;;
- *)
- tmp_shrpenv="env LD_RUN_PATH=$shrpdir"
- ;;
-@@ -9948,6 +9969,13 @@ esac
- : Check if we want perlio
- useperlio="$define"
-
-+: Look for a hint-file generated 'call-back-unit'. We need
-+: to set some defaults for building perl in pkgsrc.
-+if $test -f pkgsrc.cbu; then
-+ echo "Setting pkgsrc-specific hints regarding compiler/linker flags..."
-+ . ./pkgsrc.cbu
-+fi
-+
- : Set the vendorbin variables
- case "$vendorprefix" in
- '') d_vendorbin="$undef"
-@@ -20573,7 +20601,15 @@ RCAT(Rei,ser)
- ACAT(Cir,cus)
- EOCP
- $cppstdin $cppflags $cppminus <cpp_stuff.c >cpp_stuff.out 2>&1
--if $contains 'Circus' cpp_stuff.out >/dev/null 2>&1; then
-+# yuck, what a hack.
-+# MIPSPro compiler/preprocessor behaves differently if invoked on
-+# stdin vs file. Here we test for stdin, but lateron we use files.
-+# So force it to work the way we know it does:
-+if [ x"${OPSYS}" = x"IRIX" ]; then
-+ echo "Hacking MIPSPro on file vs. stdin..." >&4
-+ echo "We know we can catify or stringify, separately or together!"
-+ cpp_stuff=42
-+elif $contains 'Circus' cpp_stuff.out >/dev/null 2>&1; then
- echo "Oh! Smells like ANSI's been here." >&4
- echo "We can catify or stringify, separately or together!"
- cpp_stuff=42
-@@ -23519,6 +23555,18 @@ eval $inhdr
- set fenv.h i_fenv
- eval $inhdr
-
-+: And really validate that it is OK to include it
-+: On NetBSD 6.x non-amd64 non-i386 and non-sparc this fails
-+cat > try.c <<EOCP
-+#include <fenv.h>
-+int main() { return 0; }
-+EOCP
-+set try
-+if ! eval $compile_ok; then
-+ echo "<fenv.h> found to be unusable, disabling" >&4
-+ i_fenv=$undef
-+fi
-+
- : see if this is a fp.h system
- set fp.h i_fp
- eval $inhdr
diff --git a/perl5-devel/patches/patch-Makefile.SH b/perl5-devel/patches/patch-Makefile.SH
deleted file mode 100644
index b643e2538d..0000000000
--- a/perl5-devel/patches/patch-Makefile.SH
+++ /dev/null
@@ -1,15 +0,0 @@
-$NetBSD: patch-Makefile.SH,v 1.10 2019/11/14 09:56:56 adam Exp $
-
-Use correct -install_name on Darwin.
-
---- Makefile.SH.orig 2019-10-24 21:27:53.000000000 +0000
-+++ Makefile.SH
-@@ -70,7 +70,7 @@ true)
- ${revision}.${patchlevel}.${subversion}"
- case "$osvers" in
- 1[5-9]*|[2-9]*)
-- shrpldflags="$shrpldflags -install_name `pwd`/\$@ -Xlinker -headerpad_max_install_names"
-+ shrpldflags="$shrpldflags -install_name \$(shrpdir)/\$@ -Xlinker -headerpad_max_install_names"
- exeldflags="-Xlinker -headerpad_max_install_names"
- ;;
- *)
diff --git a/perl5-devel/patches/patch-caretx.c b/perl5-devel/patches/patch-caretx.c
deleted file mode 100644
index 24e45af314..0000000000
--- a/perl5-devel/patches/patch-caretx.c
+++ /dev/null
@@ -1,15 +0,0 @@
-$NetBSD: patch-caretx.c,v 1.3 2019/04/23 09:27:46 adam Exp $
-
-NetBSD's implementation sometimes returns "/"; reject that too.
-
---- caretx.c.orig 2023-01-19 22:33:49.000000000 +0000
-+++ caretx.c
-@@ -123,7 +123,7 @@ Perl_set_caret_X(pTHX) {
- valid path has a '/' in it somewhere, so use that to validate the
- result. See https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=35703
- */
-- if (len > 0 && memchr(buf, '/', len)) {
-+ if (len > 1 && memchr(buf, '/', len)) {
- sv_setpvn(caret_x, buf, len);
- return;
- }
diff --git a/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__BeOS.pm b/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__BeOS.pm
deleted file mode 100644
index 2b440f7d2c..0000000000
--- a/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__BeOS.pm
+++ /dev/null
@@ -1,16 +0,0 @@
-$NetBSD: patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__BeOS.pm,v 1.1 2021/03/15 14:23:12 ryoon Exp $
-
-* Fix libperl.so reference.
-
---- cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_BeOS.pm.orig 2020-12-18 10:04:35.000000000 +0000
-+++ cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_BeOS.pm
-@@ -49,8 +49,7 @@ libperl.a equivalent to be linked to dyn
- sub init_linker {
- my($self) = shift;
-
-- $self->{PERL_ARCHIVE} ||=
-- File::Spec->catdir('$(PERL_INC)',$Config{libperl});
-+ $self->{PERL_ARCHIVE} ||= '';
- $self->{PERL_ARCHIVEDEP} ||= '';
- $self->{PERL_ARCHIVE_AFTER} ||= '';
- $self->{EXPORT_LIST} ||= '';
diff --git a/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__Unix.pm b/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__Unix.pm
deleted file mode 100644
index 99395f8cd6..0000000000
--- a/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__Unix.pm
+++ /dev/null
@@ -1,36 +0,0 @@
-$NetBSD: patch-cpan_ExtUtils-MakeMaker_lib_ExtUtils_MM__Unix.pm,v 1.3 2022/06/28 10:02:51 wiz Exp $
-
-* $Is{NetBSD} and $Is{Interix} are unified into $Is{BSD}.
-* Ignore installed packlist when creating new packlist.
-* Compare inode numbers as string to fix pkg/55997. Cherry-picked from
- upstream. See https://github.com/Perl/perl5/pull/18788 for more details.
-
---- cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Unix.pm.orig 2021-05-13 17:40:25.661784701 +0900
-+++ cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Unix.pm 2021-05-13 17:40:29.734082886 +0900
-@@ -28,8 +28,6 @@ BEGIN {
- $Is{VMS} = $^O eq 'VMS';
- $Is{OSF} = $^O eq 'dec_osf';
- $Is{IRIX} = $^O eq 'irix';
-- $Is{NetBSD} = $^O eq 'netbsd';
-- $Is{Interix} = $^O eq 'interix';
- $Is{SunOS4} = $^O eq 'sunos';
- $Is{Solaris} = $^O eq 'solaris';
- $Is{SunOS} = $Is{SunOS4} || $Is{Solaris};
-@@ -1059,7 +1057,7 @@ sub xs_make_dynamic_lib {
- push(@m," \$(RM_F) \$\@\n");
-
- my $libs = '$(LDLOADLIBS)';
-- if (($Is{NetBSD} || $Is{Interix} || $Is{Android}) && $Config{'useshrplib'} eq 'true') {
-+ if ($Is{BSD} && $Config{'useshrplib'} eq 'true') {
- # Use nothing on static perl platforms, and to the flags needed
- # to link against the shared libperl library on shared perl
- # platforms. We peek at lddlflags to see if we need -Wl,-R
-@@ -2351,7 +2349,7 @@ pure_vendor_install :: all
- $(NOECHO) $(MOD_INSTALL) \
- };
- push @m,
--q{ read "}.$self->catfile('$(VENDORARCHEXP)','auto','$(FULLEXT)','.packlist').q{" \
-+q{ read "" \
- write "}.$self->catfile('$(DESTINSTALLVENDORARCH)','auto','$(FULLEXT)','.packlist').q{" \
- } unless $self->{NO_PACKLIST};
-
diff --git a/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_t_MM__BeOS.t b/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_t_MM__BeOS.t
deleted file mode 100644
index 1e5c0e9a21..0000000000
--- a/perl5-devel/patches/patch-cpan_ExtUtils-MakeMaker_t_MM__BeOS.t
+++ /dev/null
@@ -1,16 +0,0 @@
-$NetBSD: patch-cpan_ExtUtils-MakeMaker_t_MM__BeOS.t,v 1.1 2021/03/15 14:23:12 ryoon Exp $
-
-* Fix libperl.so reference.
-
---- cpan/ExtUtils-MakeMaker/t/MM_BeOS.t.orig 2020-12-18 10:04:35.000000000 +0000
-+++ cpan/ExtUtils-MakeMaker/t/MM_BeOS.t
-@@ -38,8 +38,7 @@ my $MM = bless { NAME => "Foo" }, 'MM';
-
- # init_linker
- {
-- my $libperl = File::Spec->catfile('$(PERL_INC)',
-- $Config{libperl} || 'libperl.a' );
-+ my $libperl = '';
- my $export = '';
- my $after = '';
- $MM->init_linker;
diff --git a/perl5-devel/patches/patch-hints_cygwin.sh b/perl5-devel/patches/patch-hints_cygwin.sh
deleted file mode 100644
index 5e4e152c95..0000000000
--- a/perl5-devel/patches/patch-hints_cygwin.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-$NetBSD: patch-hints_cygwin.sh,v 1.1 2013/04/23 12:22:36 obache Exp $
-
-* prevent to use C++ by default.
-
---- hints/cygwin.sh.orig 2013-03-04 15:16:22.000000000 +0000
-+++ hints/cygwin.sh
-@@ -39,7 +39,7 @@ archname='cygwin'
- # - otherwise -fpic
- cccdlflags=' '
- lddlflags=' --shared'
--test -z "$ld" && ld='g++'
-+test -z "$ld" && ld="$cc"
-
- case "$osvers" in
- # Configure gets these wrong if the IPC server isn't yet running:
diff --git a/perl5-devel/patches/patch-hints_linux.sh b/perl5-devel/patches/patch-hints_linux.sh
deleted file mode 100644
index ab3d04b57d..0000000000
--- a/perl5-devel/patches/patch-hints_linux.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-$NetBSD: patch-hints_linux.sh,v 1.1 2019/04/23 09:27:46 adam Exp $
-
-We intentionally wire down the 'libswanted' list in the package Makefile,
-so don't let the hints file add new libraries that may be found outside
-Pkgsrc control.
-
---- hints/linux.sh.orig 2014-05-26 13:34:20.000000000 +0000
-+++ hints/linux.sh
-@@ -61,10 +61,6 @@
-
- # Debian 4.0 puts ndbm in the -lgdbm_compat library.
- echo $libs
--if echo " $libswanted " | grep -q ' gdbm '; then
-- # Only add if gdbm is in libswanted.
-- libswanted="$libswanted gdbm_compat"
--fi
-
- # Configure may fail to find lstat() since it's a static/inline
- # function in <sys/stat.h>.
diff --git a/perl5-devel/patches/patch-hints_netbsd.sh b/perl5-devel/patches/patch-hints_netbsd.sh
deleted file mode 100644
index 8bf82e7f57..0000000000
--- a/perl5-devel/patches/patch-hints_netbsd.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-$NetBSD: patch-hints_netbsd.sh,v 1.10 2015/02/25 14:56:45 wiz Exp $
-
---whole-archive is a linker flag, not a compiler flag
-Better defaults for paths.
-Stop grovelling for functions we don't want to provide (*host*)
-
---- hints/netbsd.sh.orig 2015-01-17 16:59:58.000000000 +0000
-+++ hints/netbsd.sh
-@@ -36,16 +36,6 @@ case "$osvers" in
- d_dlerror=$define
- cccdlflags="-DPIC -fPIC $cccdlflags"
- lddlflags="-shared $lddlflags"
-- cat >UU/cc.cbu <<'EOCBU'
--# gcc 4.6 doesn't support --whole-archive, but it's required for the
--# system gcc to build correctly, so check for it
--echo 'int f(void) { return 0; }' >try.c
--if ${cc:-cc} $cccdlflags -c try.c -otry.o 2>&1 &&
-- ${cc:-cc} --whole-archive $lddlflags try.o -otry.so 2>&1 ; then
-- lddlflags="--whole-archive $lddlflags"
--fi
--rm try.c try.o try.so 2>/dev/null
--EOCBU
- rpathflag="-Wl,-rpath,"
- case "$osvers" in
- 1.[0-5]*)
-@@ -200,10 +190,12 @@ esac
- EOCBU
-
- # Set sensible defaults for NetBSD: look for local software in
--# /usr/pkg (NetBSD Packages Collection) and in /usr/local.
-+# /usr/local, plus the build prefix, which might or might not be
-+# /usr/pkg.
- #
--loclibpth="/usr/pkg/lib /usr/local/lib"
--locincpth="/usr/pkg/include /usr/local/include"
-+loclibpth="/usr/local/lib ${prefix}/lib"
-+locincpth="/usr/local/include ${prefix}/include"
-+
- case "$rpathflag" in
- '')
- ldflags=
diff --git a/perl5-devel/patches/patch-hints_solaris__2.sh b/perl5-devel/patches/patch-hints_solaris__2.sh
deleted file mode 100644
index 910c067cdb..0000000000
--- a/perl5-devel/patches/patch-hints_solaris__2.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-$NetBSD: patch-hints_solaris__2.sh,v 1.3 2020/08/31 18:00:37 wiz Exp $
-
-Redo PR pkg/44999.
-
---- hints/solaris_2.sh.orig 2020-06-14 23:01:25.000000000 +0000
-+++ hints/solaris_2.sh
-@@ -585,7 +585,7 @@ EOM
- fi
- fi
- case "${cc:-cc} -v 2>/dev/null" in
-- *gcc*|*g++*)
-+ *gcc*|*g++*|clang*)
- echo 'int main() { return 0; }' > try.c
- case "`${cc:-cc} $ccflags -mcpu=v9 -m64 -S try.c 2>&1 | grep 'm64 is not supported by this configuration'`" in
- *"m64 is not supported"*)
-@@ -622,7 +622,7 @@ EOM
- # use that with Solaris 11 and later, but keep
- # the old behavior for older Solaris versions.
- case "$osvers" in
-- 2.?|2.10) lddlflags="$lddlflags -G -m64" ;;
-+ 2.?|2.10) lddlflags="$lddlflags -shared -m64" ;;
- *) lddlflags="$lddlflags -shared -m64" ;;
- esac
- ;;
diff --git a/perl5-devel/patches/patch-installperl b/perl5-devel/patches/patch-installperl
deleted file mode 100644
index 5b6188f0a2..0000000000
--- a/perl5-devel/patches/patch-installperl
+++ /dev/null
@@ -1,29 +0,0 @@
-$NetBSD: patch-installperl,v 1.2 2021/03/15 14:23:12 ryoon Exp $
-
-Haiku part: From:
-https://github.com/haikuports/haikuports/blob/master/dev-lang/perl/patches/perl-5.32.0.patchset
-
---- installperl.orig 2020-12-18 09:58:48.000000000 +0000
-+++ installperl
-@@ -336,7 +336,6 @@ $do_installprivlib = 0 if $versiononly &
- mkpath($installprivlib);
- mkpath($installarchlib);
- mkpath($installsitelib, $opts{verbose}, 0777) if ($installsitelib);
--mkpath($installsitearch, $opts{verbose}, 0777) if ($installsitearch);
-
- if (-d 'lib') {
- find({no_chdir => 1, wanted => \&installlib}, 'lib')
-@@ -382,6 +381,13 @@ elsif ($Is_Cygwin) { # On Cygwin symlink
-
- # AIX needs perl.exp installed as well.
- push(@corefiles,'perl.exp') if $^O eq 'aix';
-+
-+ # Haiku requires haikuish.h.
-+ if ($^O eq 'haiku') {
-+ # Haiku needs haikuish.h installed as well.
-+ mkpath("$installarchlib/CORE/haiku", $opts{verbose}, 0777);
-+ push(@corefiles,'haiku/haikuish.h');
-+ }
- }
-
-
diff --git a/perl5-devel/vars.mk b/perl5-devel/vars.mk
deleted file mode 100644
index f5e9002fe6..0000000000
--- a/perl5-devel/vars.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-# $NetBSD: vars.mk,v 1.5 2011/10/28 07:41:52 obache Exp $
-#
-# This Makefile fragment exposes several Perl configuration variables
-# to the package Makefiles. The variables are only defined if the
-# ${PERL5} executable exists.
-
-.include "../../mk/bsd.prefs.mk"
-
-_PERL5_VARS= INSTALLARCHLIB INSTALLSCRIPT \
- INSTALLVENDORBIN INSTALLVENDORSCRIPT \
- INSTALLVENDORARCH INSTALLVENDORLIB \
- INSTALLVENDORMAN1DIR INSTALLVENDORMAN3DIR
-
-.if defined(PERL5) && exists(${PERL5:Q})
-#
-# Locate some of the installation prefixes for ${PERL5} that are used to
-# define later variables.
-#
-. if !defined(_PERL5_VARS_OUT)
-_PERL5_VARS_CMD= ${PERL5:Q} -V:prefix ${_PERL5_VARS:tl:S/^/-V:/}
-_PERL5_VARS_OUT:= ${_PERL5_VARS_CMD:sh:ts,:S/'//g:S/;//g:Q:S/,/ /g}
-MAKEVARS+= _PERL5_VARS_OUT
-. endif
-
-. if !defined(_PERL5_PREFIX)
-_PERL5_PREFIX:= ${_PERL5_VARS_OUT:Mprefix=*:C/^prefix=//}
-MAKEVARS+= _PERL5_PREFIX
-. endif
-#
-# Define PERL5_SUB_* as the vendor variables minus the installation prefix
-# define later variables.
-#
-. for _var_ in ${_PERL5_VARS}
-. if !defined(PERL5_SUB_${_var_})
-PERL5_SUB_${_var_}:= ${_PERL5_VARS_OUT:M${_var_:tl}=*:S/^${_var_:tl}=${_PERL5_PREFIX:=/}//}
-. endif
-PERL5_${_var_}?= ${PREFIX}/${PERL5_SUB_${_var_}}
-MAKEVARS+= PERL5_SUB_${_var_}
-PLIST_SUBST+= PERL5_SUB_${_var_}=${PERL5_SUB_${_var_}:Q}
-PRINT_PLIST_AWK+= /^${PERL5_SUB_${_var_}:S|/|\\/|g}/ \
- { gsub(/${PERL5_SUB_${_var_}:S|/|\\/|g}/, \
- "$${PERL5_SUB_${_var_}}") }
-. endfor
-.endif # PERL5
diff --git a/perl5-devel/version.mk b/perl5-devel/version.mk
deleted file mode 100644
index 8ccf301807..0000000000
--- a/perl5-devel/version.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-# $NetBSD: version.mk,v 1.5 2019/04/23 09:27:46 adam Exp $
-#
-# Distill the PERL5_REQD list into a single value that is the highest
-# version of Perl required.
-#
-
-# Default to needing Perl 5.
-PERL5_REQD+= 5.0
-PERL5_REQD+= ${_OPSYS_PERL_REQD}
-
-.if !defined(_PERL5_REQD)
-_PERL5_REQD?= none
-. for _version_ in ${PERL5_REQD}
-. for _pkg_ in perl-${_version_}
-. if !empty(_PERL5_REQD:Mnone)
-_PERL5_PKG_SATISFIES_DEP= yes
-. for _dep_ in ${PERL5_REQD:S/^/perl>=/}
-. if !empty(_PERL5_PKG_SATISFIES_DEP:M[yY][eE][sS])
-_PERL5_PKG_SATISFIES_DEP!= \
- if ${PKG_ADMIN} pmatch ${_dep_:Q} ${_pkg_:Q} 2>/dev/null; then \
- ${ECHO} yes; \
- else \
- ${ECHO} no; \
- fi
-. endif
-. endfor
-. if !empty(_PERL5_PKG_SATISFIES_DEP:M[yY][eE][sS])
-_PERL5_REQD= ${_version_}
-. endif
-. endif
-. endfor
-. endfor
-.endif
-PERL5_REQD:= ${_PERL5_REQD}
-MAKEVARS+= _PERL5_REQD
Home |
Main Index |
Thread Index |
Old Index