CVS commit: pkgsrc/licenses

["Rui-Xiang Guo" <rxg%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   rxg
Date:           Sun May 31 13:34:34 UTC 2026

Added Files:
        pkgsrc/licenses: firmware-imx-license

Log Message:
licenses: add firmware-imx-license


To generate a diff of this commit:
cvs rdiff -u -r0 -r1.1 pkgsrc/licenses/firmware-imx-license

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Added files:

Index: pkgsrc/licenses/firmware-imx-license
diff -u /dev/null pkgsrc/licenses/firmware-imx-license:1.1
--- /dev/null   Sun May 31 13:34:34 2026
+++ pkgsrc/licenses/firmware-imx-license        Sun May 31 13:34:33 2026
@@ -0,0 +1,832 @@
+LA_OPT_NXP_Software_License v63 May 2025
+IMPORTANT.  Read the following NXP Software License Agreement ("Agreement")
+completely. By selecting the "I Accept" button at the end of this page, or by
+downloading, installing, or using the Licensed Software, you indicate that you
+accept the terms of the Agreement, and you acknowledge that you have the
+authority, for yourself or on behalf of your company, to bind your company to
+these terms. You may then download or install the file. In the event of a
+conflict between the terms of this Agreement and any license terms and
+conditions for NXP’s proprietary software embedded anywhere in the Licensed
+Software file, the terms of this Agreement shall control.  If a separate
+license agreement for the Licensed Software has been signed by you and NXP,
+then that agreement shall govern your use of the Licensed Software and shall
+supersede this Agreement.
+
+NXP SOFTWARE LICENSE AGREEMENT
+This is a legal agreement between your employer, of which you are an authorized
+representative, or, if you have no employer, you as an individual ("you" or
+"Licensee"), and NXP USA, Inc., if Licensee is located within the United States
+or NXP Semiconductors Netherlands B.V., if Licensee if located outside of the
+United States (“NXP”).  It concerns your rights to use the software
+provided to you in binary or source code form and any accompanying written
+materials (the "Licensed Software"). The Licensed Software may include any
+updates or error corrections or documentation relating to the Licensed Software
+provided to you by NXP under this Agreement. In consideration for NXP allowing
+you to access the Licensed Software, you are agreeing to be bound by the terms
+of this Agreement. If you do not agree to all of the terms of this Agreement,
+do not download or install the Licensed Software. If you change your mind
+later, stop using the Licensed Software and delete all copies of the Licensed
+Software in your possession or control. Any copies of the Licensed Software
+that you have already distributed, where permitted, and do not destroy will
+continue to be governed by this Agreement. Your prior use will also continue to
+be governed by this Agreement.
+1.       DEFINITIONS
+1.1.         "Affiliate" means, with respect to a party, any corporation or
+other legal entity that now or hereafter Controls, is Controlled by or is under
+common Control with such party; where "Control" means the direct or indirect
+ownership of greater than fifty percent (50%) of the shares or similar
+interests entitled to vote for the election of directors or other persons
+performing similar functions. An entity is considered an Affiliate only so long
+as such Control exists.
+1.2    "Authorized System" means either (i) Licensee’s hardware product
+which incorporates an NXP Product or (ii) Licensee’s software program which
+is used exclusively in connection with an NXP Product and with which the
+Licensed Software will be integrated.
+1.3.   "Derivative Work" means a work based upon one or more pre-existing
+works.  A work consisting of editorial revisions, annotations, elaborations, or
+other modifications which, as a whole, represent an original work of
+authorship, is a Derivative Work.
+1.4    "Intellectual Property Rights" means any and all rights under statute,
+common law or equity in and under copyrights, trade secrets, and patents
+(including utility models), and analogous rights throughout the world,
+including any applications for and the right to apply for, any of the foregoing.
+1.5    "NXP Product" means a hardware product (e.g. a microprocessor,
+microcontroller, sensor or digital signal processor) and/or services (e.g.
+cloud platform services) supplied directly or indirectly from NXP or an NXP
+Affiliate, unless there is a product specified in the Software Content
+Register, in which case this definition is limited to such product.
+1.6      "Software Content Register" means the documentation which may
+accompany the Licensed Software which identifies the contents of the Licensed
+Software, including but not limited to identification of any Third Party
+Software, if any, and may also contain other related information as whether the
+license in 2.3 is applicable.
+1.7     "Third Party Software" means, any software included in the Licensed
+Software that is not NXP proprietary software, and is not open source software,
+and to which different license terms may apply.
+2.       LICENSE GRANT.
+2.1.         If you are not expressly granted the distribution license in
+Section 2.3 in the Software Content Register, then you are only granted the
+rights in Section 2.2 and not in 2.3.  If you are expressly granted the
+distribution license in Section 2.3 in the Software Content Register, then you
+are granted the rights in both Section 2.2 and 2.3.
+2.2.   Standard License.  Subject to the terms and conditions of this
+Agreement, NXP grants you a worldwide, personal, non-transferable,
+non-exclusive, non-sublicensable license, solely for the development of an
+Authorized System:
+(a)    to use and reproduce the Licensed Software (and its Derivative Works
+prepared under the license in Section 2.2(b)) solely in combination with a NXP
+Product; and
+(b)    for Licensed Software provided to you in source code form (human
+readable), to prepare Derivative Works of the Licensed Software solely for use
+in combination with a NXP Product.
+You may not distribute or sublicense the Licensed Software to others under the
+license granted in this Section 2.2.
+You may demonstrate the Licensed Software to your direct customers as part of
+an Authorized System so long as such demonstration is directly controlled by
+you and without prior approval by NXP; however, to all other third parties only
+if NXP has provided its advance, written approval (e.g. email approval) of your
+demonstrating the Licensed Software to specified third parties or at specified
+event(s).  You may not leave the Licensed Software with a direct customer or
+any other third party at any time.
+2.3.        Additional Distribution License.  If expressly authorized in the
+Software Content Register, subject to the terms and conditions of this
+Agreement, NXP grants you a worldwide, personal, non-transferable,
+non-exclusive, non-sublicensable license solely in connection with your
+manufacturing and distribution of an Authorized System:
+(a)    to manufacture (or have manufactured), distribute, and market the
+Licensed Software (and its Derivative Works prepared under the license in
+2.2(b)) in object code (machine readable format) only as part of, or embedded
+within, Authorized Systems and not on a standalone basis solely for use in
+combination with a NXP Product.  Notwithstanding the foregoing, those files
+marked as .h files ("Header files") may be distributed in source or object code
+form, but only as part of, or embedded within Authorized Systems; and
+(b)    to copy and distribute as needed, solely in connection with an
+Authorized System and for use in combination with a NXP Product,
+non-confidential NXP information provided as part of the Licensed Software for
+the purpose of maintaining and supporting Authorized Systems with which the
+Licensed Software is integrated.
+2.4    Separate license grants to Third Party Software, or other terms
+applicable to the Licensed Software if different from those granted in this
+Section 2, are contained in Appendix A. The Licensed Software may be
+accompanied by a Software Content Register which will identify that portion of
+the Licensed Software, if any, that is subject to the different terms in
+Appendix A.
+2.5.         You may use subcontractors to exercise your rights under Section
+2.2 and Section 2.3, if any, so long as you have an agreement in place with the
+subcontractor containing confidentiality restrictions no less stringent than
+those contained in this Agreement. You will remain liable for your
+subcontractors’ adherence to the terms of this Agreement and for any and all
+acts and omissions of such subcontractors with respect to this Agreement and
+the Licensed Software.
+3.       LICENSE LIMITATIONS AND RESTRICTIONS.
+3.1.         The licenses granted above in Section 2 only extend to NXP
+Intellectual Property Rights that would be infringed by the unmodified Licensed
+Software prior to your preparation of any Derivative Work.
+3.2.         The Licensed Software is licensed to you, not sold. Title to
+Licensed Software delivered hereunder remains vested in NXP or NXP’s licensor
+and cannot be assigned or transferred. You are expressly forbidden from selling
+or otherwise distributing the Licensed Software, or any portion thereof, except
+as expressly permitted herein. This Agreement does not grant to you any implied
+rights under any NXP or third party Intellectual Property Rights.
+3.3.         You may not translate, reverse engineer, decompile, or disassemble
+the Licensed Software except to the extent applicable law specifically
+prohibits such restriction. You must prohibit your subcontractors or customers
+(if distribution is permitted) from translating, reverse engineering,
+decompiling, or disassembling the Licensed Software except to the extent
+applicable law specifically prohibits such restriction.
+3.4.         You must reproduce any and all of NXP’s (or its third-party
+licensor’s) copyright notices and other proprietary legends on copies of
+Licensed Software.
+3.5.         If you distribute the Licensed Software to the United States
+Government, then the Licensed Software is "restricted computer software" and is
+subject to FAR 52.227-19.
+3.6.         You grant to NXP a non-exclusive, non-transferable, irrevocable,
+perpetual, worldwide, royalty-free, sub-licensable license under your
+Intellectual Property Rights to use without restriction and for any purpose any
+suggestion, comment or other feedback related to the Licensed Software
+(including, but not limited to, error corrections and bug fixes).
+3.7.         You will not take or fail to take any action that could subject
+the Licensed Software to an Excluded License. An Excluded License means any
+license that requires, as a condition of use, modification or distribution of
+software subject to the Excluded License, that such software or other software
+combined and/or distributed with the software be (i) disclosed or distributed
+in source code form; (ii) licensed for the purpose of making Derivative Works;
+or (iii) redistributable at no charge.
+3.8.         You may not publish or distribute reports associated with the use
+of the Licensed Software to anyone other than NXP.  You may advise NXP of any
+results obtained from your use of the Licensed Software, including any problems
+or suggested improvements thereof, and NXP retains the right to use such
+results and related information in any manner it deems appropriate.
+3.9.        Licensee may not use the Licensed Software as data or training
+input to any artificial intelligence models or machine learning algorithms.
+4.       OPEN SOURCE.         Open source software included in the Licensed
+Software is not licensed under the terms of this Agreement but is instead
+licensed under the terms of the applicable open source license(s), such as the
+BSD License, Apache License or the GNU Lesser General Public License. Your use
+of the open source software is subject to the terms of each applicable license.
+You must agree to the terms of each applicable license, or you cannot use the
+open source software.
+5.       INTELLECTUAL PROPERTY RIGHTS.
+Upon request, you must provide NXP the source code of any derivative of the
+Licensed Software.
+Unless prohibited by law, the following paragraph shall apply.  Your
+modifications to the Licensed Software, and all intellectual property rights
+associated with, and title thereto, will be the property of NXP.  You agree to
+assign all, and hereby do assign all rights, title, and interest to any such
+modifications to the Licensed Software to NXP and agree to provide all
+assistance reasonably requested by NXP to establish, preserve or enforce such
+right.  Further, you agree to waive all moral rights relating to your
+modifications to the Licensed Software, including, without limitation, all
+rights of identification of authorship and all rights of approval, restriction,
+or limitation on use or subsequent modification.  Notwithstanding the
+foregoing, you will have the license rights granted in Section 2 hereto to any
+such modifications made by you or your licensees.
+Otherwise, you agree to grant an irrevocable, worldwide, and perpetual license
+to NXP to make, have made, use, sell, offer to sell, import, commercialize,
+sublicense and reproduce your modifications or derivative works to the Licensed
+Software without any payment to Licensee. You agree to provide all assistance
+reasonably requested by NXP to establish, preserve or enforce such right.
+6.       ESSENTIAL PATENTS.    NXP has no obligation to identify or obtain any
+license to any Intellectual Property Right of a third-party that may be
+necessary for use in connection with technology that is incorporated into the
+Authorized System (whether or not as part of the Licensed Software).
+7.       TERM AND TERMINATION.   This Agreement will remain in effect unless
+terminated as provided in this Section.
+7.1.         You may terminate this Agreement immediately upon written notice
+to NXP at the address provided below.
+7.2.         Either party may terminate this Agreement if the other party is in
+default of any of the terms and conditions of this Agreement, and termination
+is effective if the defaulting party fails to correct such default within 30
+days after written notice thereof by the non-defaulting party to the defaulting
+party at the address below.
+7.3.         Notwithstanding the foregoing, NXP may terminate this Agreement
+immediately upon written notice if you: breach any of your confidentiality
+obligations or the license restrictions under this Agreement;  become bankrupt,
+insolvent, or file a petition for bankruptcy or insolvency; make an assignment
+for the benefit of its creditors; enter proceedings for winding up or
+dissolution; are dissolved; or are nationalized or become subject to the
+expropriation of all or substantially all of your business or assets.
+7.4.         Upon termination of this Agreement, all licenses granted under
+Section 2 will expire.
+7.5.         After termination of this Agreement by either party   you will
+destroy all parts of Licensed Software and its Derivative Works (if any) and
+will provide to NXP a statement certifying the same.
+7.6.         Notwithstanding the termination of this Agreement for any reason,
+the terms of Sections 1 and 3 through 24 will survive.
+8.        SUPPORT.  NXP is not obligated to provide any support, upgrades or
+new releases of the Licensed Software under this Agreement. If you wish, you
+may contact NXP and report problems and provide suggestions regarding the
+Licensed Software. NXP has no obligation to respond to such a problem report or
+suggestion. NXP may make changes to the Licensed Software at any time, without
+any obligation to notify or provide updated versions of the Licensed Software
+to you.
+9.        NO WARRANTY.  To the maximum extent permitted by law, NXP expressly
+disclaims any warranty for the Licensed Software. The Licensed Software is
+provided "AS IS", without warranty of any kind, either express or implied,
+including without limitation the implied warranties of merchantability, fitness
+for a particular purpose,  non-infringement, or any warranty that the Licensed
+Software is free from vulnerabilities. You assume the entire risk arising out
+of the use or performance of the licensed software, or any systems you design
+using the licensed software (if any).
+10.        INDEMNITY. You agree to fully defend and indemnify NXP from all
+claims, liabilities, and costs (including reasonable attorney’s fees) related
+to (1) your use (including your subcontractor’s or distributee’s use, if
+permitted) of the Licensed Software or (2) your violation of the terms and
+conditions of this Agreement.
+11.        LIMITATION OF LIABILITY.  EXCLUDING LIABILITY FOR A BREACH OF
+SECTION 2 (LICENSE GRANTS), SECTION 3 (LICENSE LIMITATIONS AND RESTRICTIONS),
+SECTION 16 (CONFIDENTIAL INFORMATION), OR CLAIMS UNDER SECTION 10 (INDEMNITY),
+IN NO EVENT WILL EITHER PARTY BE LIABLE, WHETHER IN CONTRACT, TORT, OR
+OTHERWISE, FOR ANY INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE
+DAMAGES, INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR ANY LOSS OF USE, LOSS OF
+TIME, INCONVENIENCE, COMMERCIAL LOSS, OR LOST PROFITS, SAVINGS, OR REVENUES, TO
+THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. NXP’S TOTAL LIABILITY FOR ALL
+COSTS, DAMAGES, CLAIMS, OR LOSSES WHATSOEVER ARISING OUT OF OR IN CONNECTION
+WITH THIS AGREEMENT OR PRODUCT(S) SUPPLIED UNDER THIS AGREEMENT IS LIMITED TO
+THE AGGREGATE AMOUNT PAID BY YOU TO NXP IN CONNECTION WITH THE LICENSED
+SOFTWARE PROVIDED UNDER THIS AGREEMENT TO WHICH LOSSES OR DAMAGES ARE CLAIMED.
+
+12.        EXPORT COMPLIANCE.
+12.1   Each party shall comply with all applicable export and import control
+laws and regulations including but not limited to the US Export Administration
+Regulation (including restrictions on certain military end uses and military
+end users as specified in Section 15 C.F.R. § 744.21 and prohibited party
+lists issued by other federal governments), Catch-all regulations and all
+national and international embargoes. Each party further agrees that it will
+not knowingly transfer, divert, export or re-export, directly or indirectly,
+any product, software, including software source code, or technology restricted
+by such regulations or by other applicable national regulations, received from
+the other party under this Agreement, or any direct product of such software or
+technical data to any person, firm, entity, country or destination to which
+such transfer, diversion, export or re-export is restricted or prohibited,
+without obtaining prior written authorization from the applicable competent
+government authorities to the extent required by those laws.
+12.2   Prohibition of Export to Russian Federation
+
+(a)    With respect to activity that falls under the scope of Article 12g,
+12ga of Council Regulation (EU) No 833/2014, or Council Regulation (EU) No
+765/2006 (as the case requires), you (a) will not sell, export or re-export,
+directly or indirectly any item, and (b) will not sell, license or sublicense
+any intellectual property rights or trade secrets, to the Russian Federation or
+Belarus, or for use in the Russian Federation or Belarus.
+
+(b)    You will ensure that the purpose of paragraph (a) above is not
+frustrated by any third parties further down the commercial chain, including by
+either resellers, sublicensees, or both.
+
+(c)    You will set up and maintain an adequate monitoring mechanism to detect
+conduct by any third parties further down the commercial chain, including by
+either resellers, sublicensees, or both, that would frustrate the purpose of
+paragraph (a).
+
+(d)    Any violation of paragraphs (a), (b) or (c) will constitute a material
+breach of this Agreement, and NXP will be entitled to seek appropriate
+remedies, including, but not limited to: (i) termination of these Terms; (ii)
+suspension of any of its business relationships with you, youraffiliates or
+both, until the breach of paragraph (a) above is remedied, and (iii) a plan to
+remedy the breach.
+
+(e)    You will immediately inform NXP about any problems in applying
+paragraphs (a), (b) or (c), above, including any relevant activities by third
+parties that could frustrate the purpose of paragraph (a). You will make
+available to NXPinformation concerning compliance with the obligations under
+paragraphs (a), (b) and (c) within 2 weeks of the request for information.
+13.   GOVERNMENT CONTRACT COMPLIANCE
+13.1.      If you sell Authorized Systems directly to any government or public
+entity, including U.S., state, local, foreign or international governments or
+public entities, or indirectly via a prime contractor or subcontractor of such
+governments or entities, NXP makes no representations, certifications, or
+warranties whatsoever about compliance with government or public entity
+acquisition statutes or regulations, including, without limitation, statutes or
+regulations that may relate to pricing, quality, origin or content.
+13.2.      The Licensed Software has been developed at private expense and is a
+"Commercial Item" as defined in 48 C.F.R. Section 2.101, consisting of
+"Commercial Computer Software", and/or "Commercial Computer Software
+Documentation," as such terms are used in 48 C.F.R. Section 12.212 (or 48
+C.F.R. Section 227.7202, as applicable) and may only be licensed to or shared
+with U.S. Government end users in object code form as part of, or embedded
+within, Authorized Systems. Any agreement pursuant to which you share the
+Licensed Software will include a provision that reiterates the limitations of
+this document and requires all sub-agreements to similarly contain such
+limitations.
+14.        CRITICAL APPLICATIONS.  In some cases, NXP may promote certain
+software for use in the development of, or for incorporation into, products or
+services (a) used in applications requiring fail-safe performance or (b) in
+which failure could lead to death, personal injury, or severe physical or
+environmental damage (these products and services are referred to as "Critical
+Applications"). NXP’s goal is to educate customers so that they can design
+their own end-product solutions to meet applicable functional safety standards
+and requirements. Licensee makes the ultimate design decisions regarding its
+products and is solely responsible for compliance with all legal, regulatory,
+safety, and security related requirements concerning its products, regardless
+of any information or support that may be provided by NXP. As such, Licensee
+assumes all risk related to use of the Licensed Software in Critical
+Applications and NXP SHALL NOT BE LIABLE FOR ANY SUCH USE IN CRITICAL
+APPLICATIONS BY LICENSEE. Accordingly, Licensee will indemnify and hold NXP
+harmless from any claims, liabilities, damages and associated costs and
+expenses (including attorneys’ fees) that NXP may incur related to
+Licensee’s incorporation of the Licensed Software in a Critical Application.
+15.        CHOICE OF LAW; VENUE.  When Software is licensed by NXP USA, Inc.,
+Licensee agrees that the laws of the State of Texas, USA, without regard to
+conflicts of laws principles, will apply to all matters relating to this
+Agreement or the Software, and Licensee agrees that any litigation will be
+subject to the exclusive jurisdiction of the state or federal courts in Austin,
+Texas, USA..  When Software is licensed by NXP Semiconductors Netherlands B.V.,
+Licensee agrees that the laws of The Netherlands, without regard to conflicts
+of laws principles, will apply to all matters relating to this Agreement or the
+Software, and Licensee agrees that any litigation will be subject to the
+exclusive jurisdiction of the courts in Amsterdam, The Netherlands.
+Notwithstanding the foregoing, NXP will always be permitted to bring any action
+or proceedings against Licensee in any other court of competent jurisdiction.
+The United Nations Convention on Contracts for the International Sale of Goods
+will not apply to this document.
+16.        CONFIDENTIAL INFORMATION.  Subject to the license grants and
+restrictions contained herein, you must treat the Licensed Software as
+confidential information and you agree to retain the Licensed Software in
+confidence perpetually. You may not disclose any part of the Licensed Software
+to anyone other than distributees in accordance with Section 2.3 and employees,
+or subcontractors in accordance with Section 2.5, who have a need to know of
+the Licensed Software and who have executed written agreements obligating them
+to protect such Licensed Software to at least the same degree of
+confidentiality as in this Agreement. You agree to use the same degree of care,
+but no less than a reasonable degree of care, with the Licensed Software as you
+do with your own confidential information. You may disclose Licensed Software
+to the extent required by a court or under operation of law or order provided
+that you notify NXP of such requirement prior to disclosure, which you only
+disclose the minimum of the required information, and that you allow NXP the
+opportunity to object to such court or other legal body requiring such
+disclosure.
+17.       TRADEMARKS.  You are not authorized to use any NXP trademarks, brand
+names, or logos.
+18.        ENTIRE AGREEMENT.  This Agreement constitutes the entire agreement
+between you and NXP regarding the subject matter of this Agreement, and
+supersedes all prior communications, negotiations, understandings, agreements
+or representations, either written or oral, if any. This Agreement may only be
+amended in written form, signed by you and NXP.
+19.        SEVERABILITY.  If any provision of this Agreement is held for any
+reason to be invalid or unenforceable, then the remaining provisions of this
+Agreement will be unimpaired and, unless a modification or replacement of the
+invalid or unenforceable provision is further held to deprive you or NXP of a
+material benefit, in which case the Agreement will immediately terminate, the
+invalid or unenforceable provision will be replaced with a provision that is
+valid and enforceable and that comes closest to the intention underlying the
+invalid or unenforceable provision.
+20.        NO WAIVER.  The waiver by NXP of any breach of any provision of this
+Agreement will not operate or be construed as a waiver of any other or a
+subsequent breach of the same or a different provision.
+21.        AUDIT.  You will keep full, clear and accurate records with respect
+to your compliance with the limited license rights granted under this Agreement
+for three years following expiration or termination of this Agreement. NXP will
+have the right, either itself or through an independent certified public
+accountant to examine and audit, at NXP’s expense, not more than once a year,
+and during normal business hours, all such records that may bear upon your
+compliance with the limited license rights granted above. You must make prompt
+adjustment to compensate for any errors and/or omissions disclosed by such
+examination or audit.
+22.        NOTICES.             All notices and communications under this
+Agreement will be made in writing, and will be effective when received at the
+following addresses:
+NXP:
+NXP B.V.
+High Tech Campus 60
+5656 AG Eindhoven
+The Netherlands
+ATTN: Legal Department
+
+You:
+The address provided at registration will be used.
+
+23.        RELATIONSHIP OF THE PARTIES.     The parties are independent
+contractors. Nothing in this Agreement will be construed to create any
+partnership, joint venture, or similar relationship. Neither party is
+authorized to bind the other to any obligations with third parties.
+24.        SUCCESSION AND ASSIGNMENT.   This Agreement will be binding upon and
+inure to the benefit of the parties and their permitted successors and assigns.
+ You may not assign this Agreement, or any part of this Agreement, without the
+prior written approval of NXP, which approval will not be unreasonably withheld
+or delayed. NXP may assign this Agreement, or any part of this Agreement, in
+its sole discretion.
+25.    PRIVACY. By agreeing to this Agreement and/or utilizing the Licensed
+Software, Licensee consents to use of certain personal information, including
+but not limited to name, email address, and location, for the purpose of
+NXP’s internal analysis regarding future software offerings.  NXP’s
+complete Privacy Statement can be found at:
+https://www.nxp.com/company/our-company/about-nxp/privacy-statement:PRIVACYPRACT
+ICES.
+
+APPENDIX A
+Other License Grants and Restrictions:
+
+The Licensed Software may include some or all of the following software, which
+is either 1) Third Party Software or 2) NXP proprietary software subject to
+different terms than those in the Agreement. If the Software Content Register
+that accompanies the Licensed Software identifies any of the following Third
+Party Software or specific components of the NXP proprietary software, the
+following terms apply to the extent they deviate from the terms in the
+Agreement:
+
+AGGIOS, Inc.: EnergyLab LITE and Seed software are distributed by NXP under
+license from AGGIOS, Inc. Your use of AGGIOS software, as the Licensee, is
+subject to the following: (i) use of AGGIOS software is limited to object code
+and Authorized System only; (ii) Licensee may not sublicense the AGGIOS
+software to any third party; (iii) Licensee is only granted an evaluation
+license for the Seed software, defined as license to use the Seed software
+internally for own evaluation purposes, limited to three (3) months. Further
+rights including but not limited to production deployment must be obtained
+directly from AGGIOS, Inc.
+
+Airbiquity Inc.: The Airbiquity software may only be used in object code and
+Licensee may not sublicense the Airbiquity software to any third party.
+Licensee’s license to use the Airbiquity software expires on June 30, 2026.
+
+Amazon: Use of the Amazon software constitutes your acceptance of the terms of
+the Amazon Program Materials License Agreement (including the AVS Component
+Schedule, if applicable), located at
+https://developer.amazon.com/support/legal/pml.  All Amazon software is hereby
+designated "Amazon confidential".  With the exception of the binary library of
+the Amazon Wake Word Engine for "Alexa", all Amazon software is also hereby
+designated as "Restricted Program Materials". Amazon is a third-party
+beneficiary to this Agreement with respect to the Amazon software.
+
+Amazon Web Services, Inc.: AWS is an intended third-party beneficiary to this
+Agreement with respect to the Greengrass software. If you have an account with
+AWS that is not in good standing, you may not download, install, use or
+distribute the Greengrass software. You will comply with all instructions and
+requirements in any integration documents, guidelines, or other documentation
+AWS provides. The license to the Greengrass software will immediately terminate
+without notice if you (a) fail to comply with this Agreement or any other
+agreement with AWS, (b) fail to make timely payment for any AWS service, (c)
+fail to implement AWS updates, or (d) bring any action for intellectual
+property infringement against AWS or any AWS customer utilizing AWS services.
+Any dispute or claim relating to your use of the Greengrass software will be
+resolved by binding arbitration, rather than in court, except that you may
+assert claims in small claims court if your claims qualify.
+
+Amazon: AWS Fleetwise software must be used consistent with the terms found
+here: https://github.com/aws/aws-iot-fleetwise-edge/blob/main/LICENSE.
+
+Amphion Semiconductor Ltd.: Distribution of Amphion software must be a part of,
+or embedded within, Authorized Systems that include an Amphion Video Decoder.
+
+Apple MFi Software Development Kit: Use of Apple MFi Software and associated
+documentation is restricted to current Apple MFi licensees in accordance with
+the terms of their own valid and in-effect license from Apple.
+
+Aquantia Corp.: You may use Aquantia's API binaries solely to flash the API
+software to an NXP Product which mates with an Aquantia device.
+
+Argus Cyber Security: The Argus software may only be used in object code and
+only for evaluation and demonstration purposes.
+
+Arm Toolkit: This tool is owned by Arm Limited. You may not reverse engineer,
+decompile or dissemble any ARM Toolkit. You agree to abide by any third-party
+IP requirements, including the relevant license terms where applicable, where
+such third-party IP is identified in the documentation provided with the ARM
+Toolkit. You may not copy the Arm Toolkit except solely for archival and backup
+purposes provided all notices are preserved. Arm disclaims any and all
+liability related to your use of the ARM Toolkit.
+
+Atheros: Use of Atheros software is limited to evaluation and demonstration
+only.  Permitted distributions must be similarly limited. Further rights must
+be obtained directly from Atheros.
+
+ATI (AMD): Distribution of ATI software must be a part of, or embedded within,
+Authorized Systems that include a ATI graphics processor core.
+
+Au-Zone Technologies: eIQ Portal, Model Tool, DeepViewRT and ModelRunner are
+distributed by NXP under license from Au-Zone Technologies.  Your use of the
+Licensed Software, examples and related documentation is subject to the
+following:
+(1)          Use of Software is limited to Authorized System only
+(2)          In no event may Licensee Sublicense the Software
+(3)          AU-ZONE TECHNOLOGIES SHALL NOT BE LIABLE FOR USE OF LICENSED
+SOFTWARE IN CRITICAL APPLICATIONS BY LICENSEE
+
+Broadcom Corporation: Your use of Broadcom Corporation software is restricted
+to Authorized Systems that incorporate a compatible integrated circuit device
+manufactured or sold by Broadcom.
+
+Cadence Design Systems: Use of Cadence audio codec software is limited to
+distribution only of one copy per single NXP Product. The license granted
+herein to the Cadence Design Systems HiFi aacPlus Audio Decoder software does
+not include a license to the AAC family of technologies which you or your
+customer may need to obtain. Configuration tool outputs may only be distributed
+by licensees of the relevant Cadence SDK and distribution is limited to
+distribution of one copy embedded in a single NXP Product. Your use of Cadence
+NatureDSP Libraries whether in source code or in binary is restricted to NXP
+SoC based systems or emulation enablement based on NXP SoC.
+
+Use of the XA NN library is limited to execution on Cadence processor cores and
+not permitted non-Cadence platforms.  Redistribution is permitted only as part
+of an NXP SOC based product and must include all copyright and permission
+notices.  The library is provided “as is” without warranties, and no rights
+are granted to any third-party technologies that may be required for use.  Full
+license terms are available from Cadence Design Systems, Inc.
+
+CEVA D.S.P. Ltd. And CEVA Technologies Inc. ("CEVA"): The CEVA-SPF2 linear
+algebra, CEVA-SPF2 Neural Network Libraries, CEVA-SPF2 Core Libraries,
+CEVA-SPF2 OpenAMP and CEVA-SPF2 STL licensed modules are owned by CEVA and such
+materials may only be used in connection with an NXP product containing the
+S250 or S125 integrated circuits, whether or not the CEVA-SPF2 Core is
+physically implemented and/or enabled on such NXP product
+
+Cirque Corporation: Use of Cirque Corporation technology is limited to
+evaluation, demonstration, or certification testing only. Permitted
+distributions must be similarly limited. Further rights, including but not
+limited to ANY commercial distribution rights, must be obtained directly from
+Cirque Corporation.
+
+Coding Technologies (Dolby Labs): Use of CTS software is limited to evaluation
+and demonstration only.  Permitted distributions must be similarly limited.
+Further rights must be obtained from Dolby Laboratories.
+
+Coremark:  Use of the Coremark benchmarking software is subject to the
+following terms and conditions:
+https://github.com/eembc/coremark/blob/main/LICENSE.md
+
+CSR: Use of Cambridge Silicon Radio, Inc. ("CSR") software is limited to
+evaluation and demonstration only.  Permitted distributions must be similarly
+limited.  Further rights must be obtained directly from CSR.
+
+Crank: Use of Crank Software Inc. software is limited to evaluation and
+demonstration only. Permitted distributions must be similarly limited. Further
+rights must be obtained directly from Crank Software Inc.
+
+Cypress Semiconductor Corporation: WWD RTOS source code may only be used in
+accordance with the Cypress IOT Community License Agreement obtained directly
+from Cypress Semiconductor Corporation.
+
+Elektrobit Automotive GmbH ("EB"): EB software must be used consistent with the
+EB License Terms and Conditions, Version 1.4 (Dec 2019) found here:
+https://www.elektrobit.com/legal-notice/ .  Licensee is only granted an
+evaluation license for the EB software, defined as license to use the EB
+software internally for own evaluation purposes, limited to three (3) months.
+Production deployment of the EB software using this license is prohibited. See
+additionally Section 2.1.1 EB EULA.
+
+Embedded Systems Academy GmbH (EmSA):  Any use of Micro CANopen Plus is subject
+to the acceptance of the license conditions described in the LICENSE.INFO file
+distributed with all example projects and in the documentation and the
+additional clause described below.
+Clause 1: Micro CANopen Plus may not be used for any competitive or comparative
+purpose, including the publication of any form of run time or compile time
+metric, without the express permission of EmSA.
+
+Fenopix Technologies Private Limited: Under no circumstances may the CanvasJS
+software product be used in any way that would compete with any product from
+Fenopix.  License to the CanvasJS software will terminate immediately without
+notice if Licensee fail to comply with any provision of this Agreement.
+
+Fraunhofer IIS: Fraunhofer MPEG Audio Decoder (Fraunhofer copyright) - If you
+are provided MPEG-H decoding functionality, you understand that NXP will
+provide Fraunhofer your name and contact information.
+
+Future Technology Devices International Ltd.: Future Technology Devices
+International software must be used consistent with the terms found here:
+https://ftdichip.com/driver-licence-terms-details/
+
+Global Locate (Broadcom Corporation): Use of Global Locate, Inc. software is
+limited to evaluation and demonstration only.  Permitted distributions must be
+similarly limited.  Further rights must be obtained from Global Locate.
+
+IAR Systems: Use of IAR flashloader or any IAR source code is subject to the
+terms of the IAR Source License located within the IAR zip package. The IAR
+Source License applies to linker command files, example projects unless another
+license is explicitly stated, the cstartup code, low_level_init.c, and some
+other low-level runtime library files.
+
+LC3plus: the LC3plus Low Complexity Communication Codec Plus (LC3plus) per ETSI
+TS 103 634 V1.3.1, is subject to ETSI Intellectual Property Rights Policy, See
+https://portal.etsi.org/directives/45_directives_jun_2022.pdf. For application
+in an End Product, Fraunhofer communication applies, see
+https://www.iis.fraunhofer.de/en/ff/amm/communication/lc3.html
+
+Lumissil: Use of the Lumissil software constitutes your acceptance of the terms
+of the Lumissil Software License Agreement.  A link to the agreement is
+incorporated as follows:
+https://www.lumissil.com/assets/pdf/support/2023%20Lumissil%20IS3xCG5317%20Softw
+are%20License%20Agreement%20NXP.pdf .  The Run-Time Software and Boot ROM Code
+are without warranty of any kind from NXP or Lumissil, either express or
+implied, including without limitation the implied warranties of
+merchantability, fitness for a particular purpose, or non-infringement. You
+assume the entire risk arising out of the use or performance of the Lumissil
+software, or any systems you design using the such, if any.  For the use of
+Lumissil software, Lumissil is as a third-party beneficiary of the this
+Agreement with authority to enforce its rights in the Run-Time Software and
+Boot ROM Code.
+
+Microsoft: Except for Microsoft PlayReady software, if the Licensed Software
+includes software owned by Microsoft Corporation ("Microsoft"), it is subject
+to the terms of your license with Microsoft (the "Microsoft Underlying Licensed
+Software") and as such, NXP grants no license to you, beyond evaluation and
+demonstration in connection with NXP processors, in the Microsoft Underlying
+Licensed Software.  You must separately obtain rights beyond evaluation and
+demonstration in connection with the Microsoft Underlying Licensed Software
+from Microsoft. Microsoft does not provide support services for the components
+provided to you through this Agreement.  If you have any questions or require
+technical assistance, please contact NXP.  Microsoft Corporation is a third
+party beneficiary to this Agreement with the right to enforce the terms of this
+Agreement.  TO THE MAXIMUM EXTENT PERMITTED BY LAW, MICROSOFT AND ITS
+AFFILIATES DISCLAIM ANY WARRANTIES FOR THE MICROSOFT UNDERLYING LICENSED
+SOFTWARE.  TO THE MAXIMUM EXTENT PERMITTED BY LAW, NEITHER MICROSOFT NOR ITS
+AFFILIATES WILL BE LIABLE, WHETHER IN CONTRACT, TORT, OR OTHERWISE, FOR ANY
+DIRECT, INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES,
+INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR ANY LOSS OF USE, LOSS OF TIME,
+INCONVENIENCE, COMMERCIAL LOSS, OR LOST PROFITS, SAVINGS, OR REVENUES, ARISING
+FROM THE FROM THE USE OF THE MICROSOFT UNDERLYING LICENSED SOFTWARE.  With
+respect to the Microsoft PlayReady software, you will have the license rights
+granted in Section 2, provided that you may not use the Microsoft PlayReady
+software unless you have entered into a Microsoft PlayReady Master Agreement
+and license directly with Microsoft.
+
+MindTree: Notwithstanding the terms contained in Section 2.3 (a), if the
+Licensed Software includes proprietary software of MindTree in source code
+format, Licensee may make modifications and create derivative works only to the
+extent necessary for debugging of the Licensed Software.
+
+MM SOLUTIONS EAD:  Use of the following MM SOLUTIONS software is limited to use
+in conjuncture with NXP Products that have the Imaging Subsystem Processor
+(ISP) enabled (fusing configuration), as indicated in the applicable data
+sheet: (i) MMS Tuning Tool; (ii) Camera Development Kit (uGuzzi); (iii) and
+additional Camera Software. For the purposes of this Agreement, “Camera
+Software” means: (a) AEC (Auto Exposure Control); (b) AWB (Auto White
+Balance), (c) Auto Focus; (d) Wide Dynamic Range; (e) LED Flicker Mitigation;
+and (f) Multi-Camera Harmonization.  In no event may Licensee distribute or
+sublicense the MM SOLUTIONS software, unless otherwise licensed to do so by
+issuance of the distribution rights under Section 2.3 of the Agreement. Any
+further rights must be obtained directly from MM SOLUTIONS directly.
+
+MPEG LA: Use of MPEG LA audio or video codec technology is limited to
+evaluation and demonstration only. Permitted distributions must be similarly
+limited. Further rights must be obtained directly from MPEG LA.
+
+MQX RTOS Code: MQX RTOS source code may not be re-distributed by any NXP
+Licensee under any circumstance, even by a signed written amendment to this
+Agreement.
+
+NXP Voice Software: VoiceSpot, VoiceSeeker (including AEC), VIT Speech to
+Intent, and Conversa are subject to the terms of Section 2.2 only. Any
+commercial distribution rights are subject to a separate royalty agreement
+obtained from NXP.
+
+Together with the voice communication algorithm Conversa Licensee may get a
+tuning tool from DevExpress and/or Lightning Chart in form of certain libraries
+noted as ([name].dll) (“Tool”). Conversa as well as the Tool may only be
+used by Licensee internally during testing, evaluation or product development
+solely for tuning purposes of Licensee’s products in connection with
+Conversa. Any use of Conversa or the Tool outside the scope of this license is
+strictly prohibited, distributing the Libraries in any form. Licensee may use
+Conversa in connection with its products only following the execution of a
+separate royalty agreement with NXP.
+NXP Wireless Charging Library: License to the Software is limited to use in
+inductive coupling or wireless charging applications
+
+ON Semiconductor: ON Semiconductor AP1302 Image Signal Processor Initialization
+Binaries must be used consistent with the terms found here:
+https://github.com/ONSemiconductor/ap1302_binaries/blob/main/AP1302%20Software%2
+0License%20Agreement.pdf
+
+Opus: Use of Opus software must be consistent with the terms of the Opus
+license which can be found at: http://www.opus-codec.org/license/
+
+Oracle JRE (Java): The Oracle JRE must be used consistent with terms found
+here: http://java.com/license
+
+P&E Micro: P&E Software must be used consistent with the terms found here:
+http://www.pemicro.com/licenses/gdbserver/license_gdb.pdf
+
+Pro Design Electronic: Licensee may not modify, create derivative works based
+on, or copy the Pro Design software, documentation, hardware execution key or
+the accompanying materials.  Licensee shall not use Pro Design's or any of its
+licensors names, logos or trademarks to market the Authorized System.  Only NXP
+customers and distributors are permitted to further redistribute the Pro Design
+software and only as part of an Authorized System which contains the Pro Design
+software.
+
+Qualcomm Atheros, Inc.: Notwithstanding anything in this Agreement, Qualcomm
+Atheros, Inc. Wi-Fi software must be used strictly in accordance with the
+Qualcomm Atheros, Inc. Technology License Agreement that accompanies such
+software.  Any other use is expressly prohibited.
+
+Real Networks - GStreamer Optimized Real Format Client Code implementation or
+OpenMax Optimized Real Format Client Code: Use of the GStreamer Optimized Real
+Format Client Code, or OpenMax Optimized Real Format Client code is restricted
+to applications in the automotive market.  Licensee must be a final
+manufacturer in good standing with a current license with Real Networks for the
+commercial use and distribution of products containing the GStreamer Optimized
+Real Format Client Code implementation or OpenMax Optimized Real Format Client
+Code
+
+Real-Time Innovations, Inc.: Not withstanding anything in this Agreement,
+Real-Time Innovations, Inc. software must be used strictly in accordance with
+Real-Time Innovations, Inc.'s Automotive Software Evaluation License Agreement,
+available here:
+https://www.rti.com/hubfs/_Collateral/Services_and_Support/Automotive_Evaluation
+_SLA_90_dayNXP.pdf .  Any other use is expressly prohibited.
+
+RivieraWaves SAS (a member of the CEVA, Inc. family of companies): You may not
+use the RivieraWaves intellectual property licensed under this Agreement if you
+develop, market, and/or license products similar to such RivieraWaves
+intellectual property.  Such use constitutes a breach of this Agreement.  Any
+such use rights must be obtained directly from RivieraWaves.
+
+SanDisk Corporation: If the Licensed Software includes software developed by
+SanDisk Corporation ("SanDisk"), you must separately obtain the rights to
+reproduce and distribute this software in source code form from SanDisk.
+Please follow these easy steps to obtain the license and software:
+(1) Contact your local SanDisk sales representative to obtain the SanDisk
+License Agreement.
+(2) Sign the license agreement.  Fax the signed agreement to SanDisk USA
+marketing department at 408-542-0403.  The license will be valid when fully
+executed by SanDisk.
+(3) If you have specific questions, please send an email to sales%sandisk.com@localhost
+You may only use the SanDisk Corporation Licensed Software on products
+compatible with a SanDisk Secure Digital Card.  You may not use the SanDisk
+Corporation Licensed Software on any memory device product.  SanDisk retains
+all rights to any modifications or derivative works to the SanDisk Corporation
+Licensed Software that you may create.
+
+SEGGER Microcontroller - emWin Software: Your use of SEGGER emWin software and
+components is restricted for development of NXP ARM7, ARM9, Cortex-M0,
+Cortex-M3, Cortex-M4, Cortex-M33, Cortex-M7, and Cortex-A7 based products only.
+
+SEGGER Microcontroller - J-Link/J-Trace Software: Segger software must be used
+consistent with the terms found here: http://www.segger.com/jlink-software.html
+
+SEVENSTAX - Not withstanding anything in this Agreement, SEVENSTAX GmbH
+software must be used for evaluation purposes only, in strict accordance with
+the SEVENSTAX License Agreement, available here:
+https://www.sevenstax.de/fileadmin/documents/SEVENSTAX-NX-ESLA.txt. Any other
+use, and embedding the software into commercial products, is expressly
+prohibited.
+Synopsys/BLE Software: Your use of the Synopsys/BLE Software and related
+documentation is subject to the following:
+(1) Synopsys is third-party beneficiaries of, and thus may enforce against you,
+the license restrictions and confidentiality obligations in this agreement with
+respect to their intellectual property and proprietary information.
+(2) Your distribution of the Licensed Software shall subject any recipient to a
+written agreement at least as protective of the Licensed Software as provided
+in this Agreement.
+
+Synopsys/Target Compiler Technologies: Your use of the Synopsys/Target Compiler
+Technologies Licensed Software and related documentation is subject to the
+following:
+(1) Duration of the license for the Licensed Software is limited to 12 months,
+unless otherwise specified in the license file.
+(2) The Licensed Software is usable by one user at a time on a single
+designated computer, unless otherwise agreed by Synopsys.
+(3) Licensed Software and documentation are to be used only on a designated
+computer at the designated physical address provided by you on the APEX license
+form.
+(4) The Licensed Software is not sub-licensable.
+
+T2 Labs / T2 Software:  As a condition to the grant of any license under this
+Agreement, you represent and warrant that you will comply with all licenses,
+agreements, rules and bylaws of the Bluetooth SIG (Special Interest Group )
+applicable to the licensed software and documentation and its use which may
+affect when and if you may take certain actions under licenses granted
+hereunder.
+
+The license grant under this Agreement is conditional to you being (i) a
+Bluetooth SIG Associate member until such time as the specifications for the
+software are made public to Bluetooth SIG members of any level and (ii)
+thereafter a Bluetooth SIG member of any level.
+
+Notwithstanding the terms contained in Section 2.3 (a), if the licensed
+software includes proprietary software in source code format, you may make
+modifications and create derivative works only to the extent necessary for
+improving the performance of the source code with the NXP products or your
+products and for creating enhancements of such products. You may not further
+sublicense or otherwise distribute the source code, or any modifications or
+derivatives thereof as stand-alone products.  You will be responsible for
+qualifying any modifications or derivatives with the Bluetooth SIG and any
+other qualifying bodies.
+
+TARA Systems: Use of TARA Systems GUI technology Embedded Wizard is limited to
+evaluation and demonstration only. Permitted distributions must be similarly
+limited. Further rights must be obtained directly from TARA Systems.
+
+Teensyduino Core Library:  If the Teensyduino Core Library or documentation is
+incorporated into a build system that allows selection among a list of target
+devices, then similar target devices manufactured by PJRC.com must be included
+in the list of target devices and selectable in the same manner.
+
+Texas Instruments: Your use of Texas Instruments Inc. WiLink8 Licensed Software
+is restricted to NXP SoC based systems that include a compatible connectivity
+device manufactured by TI.
+
+TES Electronic Solutions Germany (TES):  TES 3D Surround View software and
+associated data and documentation may only be used for evaluation purposes and
+for demonstration to third parties in integrated form on a board package
+containing an NXP S32V234 device. Licensee may not distribute or sublicense the
+TES software. Your license to the TES software may be terminated at any time
+upon notice.
+
+Vivante: Distribution of Vivante software must be a part of, or embedded
+within, Authorized Systems that include a Vivante Graphics Processing Unit.
+
+Wittenstein:  Your use of the SafeRTOS v9.x and Networking Stack, in object
+form, is limited to your internal testing, evaluation, feedback and development
+specifically for use with an NXP Product.  Licensee’s license to use and
+supply the software to you expires on June 25, 2026.  Further rights must be
+obtained directly from Wittenstein.