pkgsrc-Changes archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

CVS commit: pkgsrc/mk/gnu-config



Module Name:    pkgsrc
Committed By:   joerg
Date:           Sun Dec  3 00:10:46 UTC 2017

Modified Files:
        pkgsrc/mk/gnu-config: missing

Log Message:
Revert gnu-config/missing, new version loops.


To generate a diff of this commit:
cvs rdiff -u -r1.4 -r1.5 pkgsrc/mk/gnu-config/missing

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: pkgsrc/mk/gnu-config/missing
diff -u pkgsrc/mk/gnu-config/missing:1.4 pkgsrc/mk/gnu-config/missing:1.5
--- pkgsrc/mk/gnu-config/missing:1.4    Fri Dec  1 20:48:40 2017
+++ pkgsrc/mk/gnu-config/missing        Sun Dec  3 00:10:46 2017
@@ -1,10 +1,10 @@
 #! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
+# Common stub for a few missing GNU programs while installing.
 
-scriptversion=2017-09-16.17; # UTC
+scriptversion=2012-01-06.18; # UTC
 
-# Copyright (C) 1996-2017 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard%iro.umontreal.ca@localhost>, 1996.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard%iro.umontreal.ca@localhost>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,7 +17,7 @@ scriptversion=2017-09-16.17; # UTC
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -29,33 +29,61 @@ if test $# -eq 0; then
   exit 1
 fi
 
-case $1 in
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, 'missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
 
-  --is-lightweight)
-    # Used by our autoconf macros to check whether the available missing
-    # script is modern enough.
-    exit 0
-    ;;
+msg="missing on your system"
 
-  --run)
-    # Back-compat with the calling convention used by older automake.
-    shift
-    ;;
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
+Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
-  bison     yacc      flex         lex       help2man
+  aclocal      touch file 'aclocal.m4'
+  autoconf     touch file 'configure'
+  autoheader   touch file 'config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all 'Makefile.in' files
+  bison        create 'y.tab.[ch]', if possible, from existing .[ch]
+  flex         create 'lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create 'lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  yacc         create 'y.tab.[ch]', if possible, from existing .[ch]
 
 Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
 'g' are ignored when checking the name.
@@ -70,146 +98,233 @@ Send bug reports to <bug-automake%gnu.or@localhost
     ;;
 
   -*)
-    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "$0: Unknown '$1' option"
     echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# Run the given program, remember its exit status.
-"$@"; st=$?
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
 
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running '$TOOL --version' or '$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
 
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch.  This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
-  msg="probably too old"
-elif test $st -eq 127; then
-  # Program was missing.
-  msg="missing on your system"
-else
-  # Program was found and executed, but failed.  Give up.
-  exit $st
-fi
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified 'acinclude.m4' or '${configure_ac}'.  You might want
+         to install the Automake and Perl packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified '${configure_ac}'.  You might want to install the
+         Autoconf and GNU m4 packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified 'acconfig.h' or '${configure_ac}'.  You might want
+         to install the Autoconf and GNU m4 packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+                                      sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
+         You might want to install the Automake and Perl packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+          sed 's/\.am$/.in/' |
+          while read f; do touch "$f"; done
+    ;;
+
+  autom4te*)
+    echo 1>&2 "\
+WARNING: '$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get '$1' as part of Autoconf from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+       touch $file
+    else
+       test -z "$file" || exec >$file
+       echo "#! /bin/sh"
+       echo "# Created by GNU Automake missing as a replacement of"
+       echo "#  $ $@"
+       echo "exit 0"
+       chmod +x $file
+       exit 1
+    fi
+    ;;
+
+  bison*|yacc*)
+    echo 1>&2 "\
+WARNING: '$1' $msg.  You should only need it if
+         you modified a '.y' file.  You may need the Bison package
+         in order for those modifications to take effect.  You can get
+         Bison from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG=\${$#}
+       case $LASTARG in
+       *.y)
+           SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+           if test -f "$SRCFILE"; then
+                cp "$SRCFILE" y.tab.c
+           fi
+           SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+           if test -f "$SRCFILE"; then
+                cp "$SRCFILE" y.tab.h
+           fi
+         ;;
+       esac
+    fi
+    if test ! -f y.tab.h; then
+       echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+       echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex*|flex*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified a '.l' file.  You may need the Flex package
+         in order for those modifications to take effect.  You can get
+         Flex from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG=\${$#}
+       case $LASTARG in
+       *.l)
+           SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+           if test -f "$SRCFILE"; then
+                cp "$SRCFILE" lex.yy.c
+           fi
+         ;;
+       esac
+    fi
+    if test ! -f lex.yy.c; then
+       echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+        you modified a dependency of a manual page.  You may need the
+        Help2man package in order for those modifications to take
+        effect.  You can get Help2man from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+       touch $file
+    else
+       test -z "$file" || exec >$file
+       echo ".ab help2man is required to generate this page"
+       exit $?
+    fi
+    ;;
+
+  makeinfo*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified a '.texi' or '.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy 'make' (AIX,
+         DU, IRIX).  You might want to install the Texinfo package or
+         the GNU make package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+       /^@setfilename/{
+         s/.* \([^ ]*\) *$/\1/
+         p
+         q
+       }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: '$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the 'README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing '$1' program."
+    exit 1
+    ;;
+esac
 
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=https://www.gnu.org/software
-
-program_details ()
-{
-  case $1 in
-    aclocal|automake)
-      echo "The '$1' program is part of the GNU Automake package:"
-      echo "<$gnu_software_URL/automake>"
-      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/autoconf>"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-    autoconf|autom4te|autoheader)
-      echo "The '$1' program is part of the GNU Autoconf package:"
-      echo "<$gnu_software_URL/autoconf/>"
-      echo "It also requires GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-  esac
-}
-
-give_advice ()
-{
-  # Normalize program name to check for.
-  normalized_program=`echo "$1" | sed '
-    s/^gnu-//; t
-    s/^gnu//; t
-    s/^g//; t'`
-
-  printf '%s\n' "'$1' is $msg."
-
-  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
-  case $normalized_program in
-    autoconf*)
-      echo "You should only need it if you modified 'configure.ac',"
-      echo "or m4 files included by it."
-      program_details 'autoconf'
-      ;;
-    autoheader*)
-      echo "You should only need it if you modified 'acconfig.h' or"
-      echo "$configure_deps."
-      program_details 'autoheader'
-      ;;
-    automake*)
-      echo "You should only need it if you modified 'Makefile.am' or"
-      echo "$configure_deps."
-      program_details 'automake'
-      ;;
-    aclocal*)
-      echo "You should only need it if you modified 'acinclude.m4' or"
-      echo "$configure_deps."
-      program_details 'aclocal'
-      ;;
-   autom4te*)
-      echo "You might have modified some maintainer files that require"
-      echo "the 'autom4te' program to be rebuilt."
-      program_details 'autom4te'
-      ;;
-    bison*|yacc*)
-      echo "You should only need it if you modified a '.y' file."
-      echo "You may want to install the GNU Bison package:"
-      echo "<$gnu_software_URL/bison/>"
-      ;;
-    lex*|flex*)
-      echo "You should only need it if you modified a '.l' file."
-      echo "You may want to install the Fast Lexical Analyzer package:"
-      echo "<$flex_URL>"
-      ;;
-    help2man*)
-      echo "You should only need it if you modified a dependency" \
-           "of a man page."
-      echo "You may want to install the GNU Help2man package:"
-      echo "<$gnu_software_URL/help2man/>"
-    ;;
-    makeinfo*)
-      echo "You should only need it if you modified a '.texi' file, or"
-      echo "any other file indirectly affecting the aspect of the manual."
-      echo "You might want to install the Texinfo package:"
-      echo "<$gnu_software_URL/texinfo/>"
-      echo "The spurious makeinfo call might also be the consequence of"
-      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
-      echo "want to install GNU make:"
-      echo "<$gnu_software_URL/make/>"
-      ;;
-    *)
-      echo "You might have modified some files without having the proper"
-      echo "tools for further handling them.  Check the 'README' file, it"
-      echo "often tells you about the needed prerequisites for installing"
-      echo "this package.  You may also peek at any GNU archive site, in"
-      echo "case some other package contains this missing '$1' program."
-      ;;
-  esac
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
-                       -e '2,$s/^/         /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
+exit 0
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
 # time-stamp-end: "; # UTC"
 # End:



Home | Main Index | Thread Index | Old Index