pkgsrc-Changes archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
CVS commit: [pkgsrc-2016Q3] pkgsrc/net/wpa_gui
Module Name: pkgsrc
Committed By: bsiegert
Date: Tue Nov 29 17:49:51 UTC 2016
Modified Files:
pkgsrc/net/wpa_gui [pkgsrc-2016Q3]: Makefile PLIST distinfo
Log Message:
Pullup ticket #5161 - requested by sevan
net/wpa_gui: security fix
Revisions pulled up:
- net/wpa_gui/Makefile 1.27-1.28
- net/wpa_gui/PLIST 1.2
- net/wpa_gui/distinfo 1.8
---
Module Name: pkgsrc
Committed By: abs
Date: Fri Oct 28 06:24:35 UTC 2016
Modified Files:
pkgsrc/net/wpa_gui: Makefile PLIST
Log Message:
Reduce some of the mystery of life for users of wpa_gui binary packages
- add the man page.
Bump pkgrevision
---
Module Name: pkgsrc
Committed By: maya
Date: Wed Nov 16 15:57:29 UTC 2016
Modified Files:
pkgsrc/net/wpa_gui: Makefile distinfo
Log Message:
wpa_gui: update to v2.6
ChangeLog for wpa_supplicant (and also _gui):
2016-10-02 - v2.6
* fixed WNM Sleep Mode processing when PMF is not enabled
[http://w1.fi/security/2015-6/] (CVE-2015-5310)
* fixed EAP-pwd last fragment validation
[http://w1.fi/security/2015-7/] (CVE-2015-5315)
* fixed EAP-pwd unexpected Confirm message processing
[http://w1.fi/security/2015-8/] (CVE-2015-5316)
* fixed WPS configuration update vulnerability with malformed passphrase
[http://w1.fi/security/2016-1/] (CVE-2016-4476)
* fixed configuration update vulnerability with malformed parameters set
over the local control interface
[http://w1.fi/security/2016-1/] (CVE-2016-4477)
* fixed TK configuration to the driver in EAPOL-Key 3/4 retry case
* extended channel switch support for P2P GO
* started to throttle control interface event message bursts to avoid
issues with monitor sockets running out of buffer space
* mesh mode fixes/improvements
- generate proper AID for peer
- enable WMM by default
- add VHT support
- fix PMKID derivation
- improve robustness on various exchanges
- fix peer link counting in reconnect case
- improve mesh joining behavior
- allow DTIM period to be configured
- allow HT to be disabled (disable_ht=1)
- add MESH_PEER_ADD and MESH_PEER_REMOVE commands
- add support for PMKSA caching
- add minimal support for SAE group negotiation
- allow pairwise/group cipher to be configured in the network profile
- use ieee80211w profile parameter to enable/disable PMF and derive
a separate TX IGTK if PMF is enabled instead of using MGTK
incorrectly
- fix AEK and MTK derivation
- remove GTKdata and IGTKdata from Mesh Peering Confirm/Close
- note: these changes are not fully backwards compatible for secure
(RSN) mesh network
* fixed PMKID derivation with SAE
* added support for requesting and fetching arbitrary ANQP-elements
without internal support in wpa_supplicant for the specific element
(anqp[265]=<hexdump> in "BSS <BSSID>" command output)
* P2P
- filter control characters in group client device names to be
consistent with other P2P peer cases
- support VHT 80+80 MHz and 160 MHz
- indicate group completion in P2P Client role after data association
instead of already after the WPS provisioning step
- improve group-join operation to use SSID, if known, to filter BSS
entries
- added optional ssid=<hexdump> argument to P2P_CONNECT for join case
- added P2P_GROUP_MEMBER command to fetch client interface address
* P2PS
- fix follow-on PD Response behavior
- fix PD Response generation for unknown peer
- fix persistent group reporting
- add channel policy to PD Request
- add group SSID to the P2PS-PROV-DONE event
- allow "P2P_CONNECT <addr> p2ps" to be used without specifying the
default PIN
* BoringSSL
- support for OCSP stapling
- support building of h20-osu-client
* D-Bus
- add ExpectDisconnect()
- add global config parameters as properties
- add SaveConfig()
- add VendorElemAdd(), VendorElemGet(), VendorElemRem()
* fixed Suite B 192-bit AKM to use proper PMK length
(note: this makes old releases incompatible with the fixed behavior)
* improved PMF behavior for cases where the AP and STA has different
configuration by not trying to connect in some corner cases where the
connection cannot succeed
* added option to reopen debug log (e.g., to rotate the file) upon
receipt of SIGHUP signal
* EAP-pwd: added support for Brainpool Elliptic Curves
(with OpenSSL 1.0.2 and newer)
* fixed EAPOL reauthentication after FT protocol run
* fixed FTIE generation for 4-way handshake after FT protocol run
* extended INTERFACE_ADD command to allow certain type (sta/ap)
interface to be created
* fixed and improved various FST operations
* added 80+80 MHz and 160 MHz VHT support for IBSS/mesh
* fixed SIGNAL_POLL in IBSS and mesh cases
* added an option to abort an ongoing scan (used to speed up connection
and can also be done with the new ABORT_SCAN command)
* TLS client
- do not verify CA certificates when ca_cert is not specified
- support validating server certificate hash
- support SHA384 and SHA512 hashes
- add signature_algorithms extension into ClientHello
- support TLS v1.2 signature algorithm with SHA384 and SHA512
- support server certificate probing
- allow specific TLS versions to be disabled with phase2 parameter
- support extKeyUsage
- support PKCS #5 v2.0 PBES2
- support PKCS #5 with PKCS #12 style key decryption
- minimal support for PKCS #12
- support OCSP stapling (including ocsp_multi)
* OpenSSL
- support OpenSSL 1.1 API changes
- drop support for OpenSSL 0.9.8
- drop support for OpenSSL 1.0.0
* added support for multiple schedule scan plans (sched_scan_plans)
* added support for external server certificate chain validation
(tls_ext_cert_check=1 in the network profile phase1 parameter)
* made phase2 parser more strict about correct use of auth=<val> and
autheap=<val> values
* improved GAS offchannel operations with comeback request
* added SIGNAL_MONITOR command to request signal strength monitoring
events
* added command for retrieving HS 2.0 icons with in-memory storage
(REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and
RX-HS20-ICON event)
* enabled ACS support for AP mode operations with wpa_supplicant
* EAP-PEAP: fixed interoperability issue with Windows 2012r2 server
("Invalid Compound_MAC in cryptobinding TLV")
* EAP-TTLS: fixed success after fragmented final Phase 2 message
* VHT: added interoperability workaround for 80+80 and 160 MHz channels
* WNM: workaround for broken AP operating class behavior
* added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE)
* nl80211:
- add support for full station state operations
- do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled
- add NL80211_ATTR_PREV_BSSID with Connect command
- fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use
unencrypted EAPOL frames
* added initial MBO support; number of extensions to WNM BSS Transition
Management
* added support for PBSS/PCP and P2P on 60 GHz
* Interworking: add credential realm to EAP-TLS identity
* fixed EAPOL-Key Request Secure bit to be 1 if PTK is set
* HS 2.0: add support for configuring frame filters
* added POLL_STA command to check connectivity in AP mode
* added initial functionality for location related operations
* started to ignore pmf=1/2 parameter for non-RSN networks
* added wps_disabled=1 network profile parameter to allow AP mode to
be started without enabling WPS
* wpa_cli: added action script support for AP-ENABLED and AP-DISABLED
events
* improved Public Action frame addressing
- add gas_address3 configuration parameter to control Address 3
behavior
* number of small fixes
To generate a diff of this commit:
cvs rdiff -u -r1.26 -r1.26.2.1 pkgsrc/net/wpa_gui/Makefile
cvs rdiff -u -r1.1.1.1 -r1.1.1.1.84.1 pkgsrc/net/wpa_gui/PLIST
cvs rdiff -u -r1.7 -r1.7.2.1 pkgsrc/net/wpa_gui/distinfo
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: pkgsrc/net/wpa_gui/Makefile
diff -u pkgsrc/net/wpa_gui/Makefile:1.26 pkgsrc/net/wpa_gui/Makefile:1.26.2.1
--- pkgsrc/net/wpa_gui/Makefile:1.26 Tue Sep 13 17:24:30 2016
+++ pkgsrc/net/wpa_gui/Makefile Tue Nov 29 17:49:51 2016
@@ -1,6 +1,6 @@
-# $NetBSD: Makefile,v 1.26 2016/09/13 17:24:30 maya Exp $
+# $NetBSD: Makefile,v 1.26.2.1 2016/11/29 17:49:51 bsiegert Exp $
-DISTNAME= wpa_supplicant-2.5
+DISTNAME= wpa_supplicant-2.6
PKGNAME= ${DISTNAME:S/supplicant/gui/}
CATEGORIES= net
MASTER_SITES= http://hostap.epitest.fi/releases/
@@ -18,11 +18,13 @@ USE_TOOLS+= gmake
LRELEASE= ${QTDIR}/bin/lrelease
MAKE_ENV+= LRELEASE=${LRELEASE}
-INSTALLATION_DIRS= sbin
+INSTALLATION_DIRS= sbin ${PKGMANDIR}/man8
do-install:
${INSTALL_PROGRAM} ${WRKSRC}/wpa_supplicant/wpa_gui-qt4/wpa_gui \
${DESTDIR}${PREFIX}/sbin
+ ${INSTALL_MAN} ${WRKSRC}/wpa_supplicant/doc/docbook/wpa_gui.8 \
+ ${DESTDIR}${PREFIX}/${PKGMANDIR}/man8/
.include "../../x11/qt4-tools/buildlink3.mk"
.include "../../x11/qt4-libs/buildlink3.mk"
Index: pkgsrc/net/wpa_gui/PLIST
diff -u pkgsrc/net/wpa_gui/PLIST:1.1.1.1 pkgsrc/net/wpa_gui/PLIST:1.1.1.1.84.1
--- pkgsrc/net/wpa_gui/PLIST:1.1.1.1 Sun Oct 22 23:20:21 2006
+++ pkgsrc/net/wpa_gui/PLIST Tue Nov 29 17:49:51 2016
@@ -1,2 +1,3 @@
-@comment $NetBSD: PLIST,v 1.1.1.1 2006/10/22 23:20:21 rpaulo Exp $
+@comment $NetBSD: PLIST,v 1.1.1.1.84.1 2016/11/29 17:49:51 bsiegert Exp $
sbin/wpa_gui
+${PKGMANDIR}/man8/wpa_gui.8
Index: pkgsrc/net/wpa_gui/distinfo
diff -u pkgsrc/net/wpa_gui/distinfo:1.7 pkgsrc/net/wpa_gui/distinfo:1.7.2.1
--- pkgsrc/net/wpa_gui/distinfo:1.7 Wed Aug 17 21:46:45 2016
+++ pkgsrc/net/wpa_gui/distinfo Tue Nov 29 17:49:51 2016
@@ -1,7 +1,7 @@
-$NetBSD: distinfo,v 1.7 2016/08/17 21:46:45 maya Exp $
+$NetBSD: distinfo,v 1.7.2.1 2016/11/29 17:49:51 bsiegert Exp $
-SHA1 (wpa_supplicant-2.5.tar.gz) = f82281c719d2536ec4783d9442c42ff956aa39ed
-RMD160 (wpa_supplicant-2.5.tar.gz) = 07bf2b9646b0d7dec3e3507e9ef04e71784c359f
-SHA512 (wpa_supplicant-2.5.tar.gz) = e3ca36ed10b4dae8f663e98ad230c8c059c952316c21a6b0638ecb1b40a5ef1b9083138ab45207cb764a17e870b4bd0625dd6efdb65856cb4dca13ccc0559e81
-Size (wpa_supplicant-2.5.tar.gz) = 2607336 bytes
+SHA1 (wpa_supplicant-2.6.tar.gz) = 8189704e257c3e9f8300c49dc6e49a381b1d6299
+RMD160 (wpa_supplicant-2.6.tar.gz) = 2fb26394d22ac3acde2d9d7c6543af8eaac9c55a
+SHA512 (wpa_supplicant-2.6.tar.gz) = 46442cddb6ca043b8b08d143908f149954c238e0f3a57a0df73ca4fab9c1acd91b078f3f26375a1d99cd1d65625986328018c735d8705882c8f91e389cad28a6
+Size (wpa_supplicant-2.6.tar.gz) = 2753524 bytes
SHA1 (patch-wpa__supplicant_Makefile) = e6b9853800637d9539e27d2d75f7520fe2e61dca
Home |
Main Index |
Thread Index |
Old Index