[pkgsrc/trunk]: pkgsrc/mk/buildlink3 Back out part of previous that was an un...

[jlam <jlam%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/9d64f5fc2f23
branches:  trunk
changeset: 471107:9d64f5fc2f23
user:      jlam <jlam%pkgsrc.org@localhost>
date:      Thu Mar 18 09:22:34 2004 +0000

description:
Back out part of previous that was an unrelated change accidentally
committed.

diffstat:

 mk/buildlink3/bsd.buildlink3.mk |  109 +---------------------------------------
 1 files changed, 2 insertions(+), 107 deletions(-)

diffs (137 lines):

diff -r ab401a434af3 -r 9d64f5fc2f23 mk/buildlink3/bsd.buildlink3.mk
--- a/mk/buildlink3/bsd.buildlink3.mk   Thu Mar 18 09:12:08 2004 +0000
+++ b/mk/buildlink3/bsd.buildlink3.mk   Thu Mar 18 09:22:34 2004 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: bsd.buildlink3.mk,v 1.124 2004/03/18 09:12:13 jlam Exp $
+# $NetBSD: bsd.buildlink3.mk,v 1.125 2004/03/18 09:22:34 jlam Exp $
 #
 # An example package buildlink3.mk file:
 #
@@ -78,103 +78,6 @@
 .  endif
 .endif
 
-.for _pkg_ in ${BUILDLINK_PACKAGES}
-BUILDLINK_PKGBASE.${_pkg_}?=   ${_pkg_}
-.endfor
-
-_BLNK_PKGVAR?=         ${PKGBASE:S/++$/xx/:S/+$//}
-
-# Try to include buildlink3.mk files for any dependencies that are already
-# installed on the system.  This tries to handle the situation where the
-# installed package and the package as it exists in pkgsrc have differing
-# lists of dependencies.  If the package directory has moved or been
-# removed from pkgsrc, then set BUILDLINK_INSTALLED_PKGSRCDIR.<pkg> to the
-# correct PKGPATH for that package or to the empty value if it has been
-# removed.
-#
-.if !defined(_BLNK_INSTALLED_DEPDIRS.${_BLNK_PKGVAR})
-_BLNK_INSTALLED_DEPS=  # empty
-.  for _pkg_ in ${BUILDLINK_PACKAGES}
-BUILDLINK_DEPMETHOD.${_pkg_}?= full
-.    if !empty(BUILDLINK_DEPMETHOD.${_pkg_}:Mfull)
-BUILDLINK_PKGBASE.${_pkg_}?=   ${_pkg_}
-#
-# XXX This should really recursively walk through the dependency list.
-#
-_BLNK_TMP!=                                                            \
-       pkg="${BUILDLINK_PKGBASE.${_pkg_}}-[0-9]*";                     \
-       found=`${PKG_BEST_EXISTS} "$$pkg"`;                             \
-       pkgdep=;                                                        \
-       if [ -n "$$found" ]; then                                       \
-               pkgdep=`${PKG_INFO} -qf "$$found" | ${SED} -n "s/^@pkgdep[      ]*//p"`; \
-       fi;                                                             \
-       ${ECHO} "$$pkgdep"
-_BLNK_INSTALLED_DEPS:= ${_BLNK_INSTALLED_DEPS} ${_BLNK_TMP}
-.      undef _BLNK_TMP
-.    endif
-.  endfor
-_BLNK_INSTALLED_DEPPKGS=       # empty
-.  for _dep_ in ${_BLNK_INSTALLED_DEPS}
-_BLNK_TMP!=    found=`${PKG_BEST_EXISTS} "${_dep_}"`; ${ECHO} "$$found"
-_BLNK_TMP_PKGBASE:=    ${_BLNK_TMP:C/-[^-]*$//}
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGBASE}
-#                                     
-# Map package names into buildlink package variable equivalents when it
-# differs from the PKGBASE for that package.                            
-#                                     
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:S/++$/xx/:S/+$//}
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:S/^PAM$/pam/}
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:S/^freetype-lib$/freetype/}
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:S/^gettext-lib$/gettext/}
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:S/^libaudiofile$/audiofile/}
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:S/^libgetopt$/getopt/}
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:S/^libiconv$/iconv/} 
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:S/^libtool-base$/libtool/}   
-_BLNK_TMP_PKGVAR:=     ${_BLNK_TMP_PKGVAR:C/^py[0-9][0-9][^-]*-/py-/}  
-_BLNK_INSTALLED_PKGBASE.${_BLNK_TMP_PKGVAR}:=  ${_BLNK_TMP_PKGBASE}
-_BLNK_INSTALLED_DEPPKGS:=                                              \
-       ${_BLNK_INSTALLED_DEPPKGS:N${_BLNK_TMP_PKGVAR}}                 \
-       ${_BLNK_TMP_PKGVAR}
-.    undef _BLNK_TMP
-.    undef _BLNK_TMP_PKGVAR
-.    undef _BLNK_TMP_PKGBASE
-.  endfor
-_BLNK_INSTALLED_DEPDIRS=       # empty
-.  for _pkg_ in ${_BLNK_INSTALLED_DEPPKGS}
-#
-# We are using the pkgsrc-installed dependency, so clearly we must not be
-# using any built-in version of the same software.
-#
-USE_BUILTIN.${_pkg_}=  no
-#
-# If BUILDLINK_PKGSRCDIR.<pkg> is already defined (by a previous inclusion
-# of <pkg>'s buildlink2.mk file), then make that the default value for
-# BUILDLINK_INSTALLED_PKGSRCDIR.<pkg>.  Otherwise, try to dig it out of
-# the +BUILD_INFO file of the installed package.
-#
-.    if defined(BUILDLINK_PKGSRCDIR.${_pkg_})
-BUILDLINK_INSTALLED_PKGSRCDIR.${_pkg_}?=       ${BUILDLINK_PKGSRCDIR.${_pkg_}}
-.    endif
-.    if !defined(BUILDLINK_INSTALLED_PKGSRCDIR.${_pkg_})
-BUILDLINK_INSTALLED_PKGSRCDIR.${_pkg_}!=                               \
-       dir=`${PKG_INFO} -qB "${_BLNK_INSTALLED_PKGBASE.${_pkg_}}" | ${SED} -n "s/^PKGPATH=//p"`; ${ECHO} "../../$$dir"
-.    endif
-.    if exists(${BUILDLINK_INSTALLED_PKGSRCDIR.${_pkg_}}/buildlink3.mk)
-_BLNK_INSTALLED_DEPDIRS:=                                              \
-       ${_BLNK_INSTALLED_DEPDIRS}                                      \
-       ${BUILDLINK_INSTALLED_PKGSRCDIR.${_pkg_}}
-.    endif
-.  endfor
-_BLNK_INSTALLED_DEPDIRS.${_BLNK_PKGVAR}:=      ${_BLNK_INSTALLED_DEPDIRS}
-.  undef _BLNK_INSTALLED_DEPDIRS
-MAKEFLAGS+=    _BLNK_INSTALLED_DEPDIRS.${_BLNK_PKGVAR}=${_BLNK_INSTALLED_DEPDIRS.${_BLNK_PKGVAR}:Q}
-.endif
-.for _dir_ in ${_BLNK_INSTALLED_DEPDIRS.${_BLNK_PKGVAR}}
-BUILDLINK_DEPTH:=      ${BUILDLINK_DEPTH}+
-.  include "${_dir_}/buildlink3.mk"
-BUILDLINK_DEPTH:=      ${BUILDLINK_DEPTH:S/+$//}
-.endfor
-
 # For each package we use, check whether we are using the built-in
 # version of the package or if we are using the pkgsrc version.  The
 # necessary logic is encapsulated in a package's builtin.mk file, which
@@ -206,7 +109,7 @@
 #
 .  if defined(BUILDLINK_PKGSRCDIR.${_pkg_})
 .    if exists(${BUILDLINK_PKGSRCDIR.${_pkg_}}/builtin.mk)
-.      include "${BUILDLINK_PKGSRCDIR.${_pkg_}}/builtin.mk"
+.       include "${BUILDLINK_PKGSRCDIR.${_pkg_}}/builtin.mk"
 .    endif
 .  endif
 .endfor
@@ -216,14 +119,6 @@
 USE_BUILTIN.${_pkg_}?= no
 .endfor
 
-# Default value for BUILDLINK_PKGBASE.<pkg>.  This is here to set the
-# default for any package added to BUILDLINK_PACKAGES by any of the
-# above code.
-#
-.for _pkg_ in ${BUILDLINK_PACKAGES}
-BUILDLINK_PKGBASE.${_pkg_}?=   ${_pkg_}
-.endfor
-
 # Set IGNORE_PKG.<pkg> if <pkg> is the current package we're building.
 # We can then check for this value to avoid build loops.
 #