pkgsrc-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[pkgsrc/trunk]: pkgsrc/math/nickle nickle: update to 2.84.



details:   https://anonhg.NetBSD.org/pkgsrc/rev/02802d48c63a
branches:  trunk
changeset: 326226:02802d48c63a
user:      wiz <wiz%pkgsrc.org@localhost>
date:      Sun Dec 02 06:49:24 2018 +0000

description:
nickle: update to 2.84.


    Bump to version 2.84



    Construct a separate case for lexing '0' from other octal numbers

    This avoids needing code to identify this case within the octal number
    token generation code.



    Ignore '_' within numbers so it can be used as a separator

    Adopted from languages like Rust where this can be used to group
    digits in thousands for base-10 or power of two for base 2,8,16 to
    make them easier to read.

            123_456_789 = 123456789
            0xafff_1212 = 0xafff1212

    The patch makes both the lexer and string conversions support this.



    Add array initalizer tests



    Ignore SIGTTOU/SIGTTIN. Adjust TSTP processing

    When run as other than the master of a process group, nickle may not
    get all of its work done before the controlling shell takes over the
    tty and resets that control group. This means that any processing of
    terminal parameters may generate SIGTTOU/SIGTTIN signals, which end up
    re-entering the stop function and causing general chaos. Only SIG_IGN
    appears to appease the kernel into dealing with this case correctly.



    Make assignments to stdin/stdout/stderr affect C code

    Use values of these variables in the C code.



    Allow repeat initializers in implicit sized arrays for small dimensions

    When initializing an implicitly sized multi-dimensional array, permit
    repeat initializers ("...") to be used to fill out smaller dimensions.
    This is done by requiring that the maximum number of elements in each
    dimension be taken from an initalizer without a repeat element.

    This also requires allowing repeat initializers to be useful for
    resizable arrays, which required a change to the execution machinery
    as well.



    Remove incorrect tree walking in CompileSizeDimensions

    CompileSizeDimensions was incorrectly interpreting the tree structure
    for bare value nodes -- it is either passed an ARRAY, or a single
    expression value, which can either be a comprehension, an empty
    initializer or a simple expression. The simple expression case was
    incorrectly looking for a '...' element to the left, which cannot
    happen. It further recursed if it hadn't reached the end of the
    dimensions, which is pointless as that case will generate an
    error when the initializers are compiled later.

    Debian-bug: #911926


    Bump to version 2.83



    debian: Run CI tests from installed location (/usr/share/nickle/test)



    Install tests so they can be run later



    debian: Bump standards-version to 4.2.1



    Sign tarfiles. Check signature in debian/watch file.



    debian: Add autopkgtest CI script



    debian: Depend on debhelper version 11



    debian: Add debian/watch file

    Check to make sure debian package is up-to-date with upstream version.



    debian: Add hardening flag to debian/rules



    debian: Make debian/copyright conform to standard copyright-format



    debian: Add Homepage entry in debian/control



    debian: Bump compat to 11



    debian: Remove trailing whitespace from debian/changelog



    test: Remove spurious printf in check_exp test



    Spelling fixes in nickle.1.in

    expresion ? expression
    formating ? formatting



    Add AC_SYS_LARGEFILE to configure.ac

    This ensures that the correct macros to get large file support enabled
    are included in the config.h file.



    Include debian/source/format in tarball

    The tarball is used to build the debian package and without this file
    the resulting bits have a lintian warning.



    Update to version 2.82



    Add .gitignore and .dir-locals.el files



    Add tests for exp/log which cover a range of precisions

    These check log and exp with mathematical identities to see if they
    produce reasonable results at a range of precisions.



    Add Math::e_value. Fix exp and log precision error.

    e_value computes e to any desired precision.

    exp was incorrectly truncating the value just before the last
    computation step, which caused it to lose significant precision.

    log was range-reducing to 0-1 instead of 2-3, which put it outside the
    range of rapid convergence. It also needed another newtons method
    iteration step.



    Use mktime instead of timelocal

    timelocal is a glibc alias for mktime and isn't provided by the musl C
    library.

diffstat:

 math/nickle/Makefile                     |   8 +++++---
 math/nickle/PLIST                        |  20 +++++++++++++++++++-
 math/nickle/distinfo                     |  12 ++++++------
 math/nickle/patches/patch-builtin-date.c |  13 ++-----------
 4 files changed, 32 insertions(+), 21 deletions(-)

diffs (99 lines):

diff -r 0b479a1c5301 -r 02802d48c63a math/nickle/Makefile
--- a/math/nickle/Makefile      Sun Dec 02 06:48:05 2018 +0000
+++ b/math/nickle/Makefile      Sun Dec 02 06:49:24 2018 +0000
@@ -1,6 +1,6 @@
-# $NetBSD: Makefile,v 1.17 2017/11/23 16:15:23 wiz Exp $
+# $NetBSD: Makefile,v 1.18 2018/12/02 06:49:24 wiz Exp $
 
-DISTNAME=      nickle-2.81
+DISTNAME=      nickle-2.84
 CATEGORIES=    math lang
 MASTER_SITES=  http://nickle.org/release/
 
@@ -16,5 +16,7 @@
 
 TEST_TARGET=   check
 
-.include "../../mk/readline.buildlink3.mk"
+# rl_reset_after_signal, rl_echo_signal_char are missing in libedit as of 2018/12/02
+#.include "../../mk/readline.buildlink3.mk"
+.include "../../devel/readline/buildlink3.mk"
 .include "../../mk/bsd.pkg.mk"
diff -r 0b479a1c5301 -r 02802d48c63a math/nickle/PLIST
--- a/math/nickle/PLIST Sun Dec 02 06:48:05 2018 +0000
+++ b/math/nickle/PLIST Sun Dec 02 06:49:24 2018 +0000
@@ -1,4 +1,4 @@
-@comment $NetBSD: PLIST,v 1.5 2017/03/20 13:13:51 wiz Exp $
+@comment $NetBSD: PLIST,v 1.6 2018/12/02 06:49:24 wiz Exp $
 bin/nickle
 include/nickle/builtin-namespaces.h
 include/nickle/builtin.h
@@ -68,3 +68,21 @@
 share/nickle/sort.5c
 share/nickle/string.5c
 share/nickle/svg.5c
+share/nickle/test/arraytest.5c
+share/nickle/test/datetest.5c
+share/nickle/test/factorial.5c
+share/nickle/test/gcdtest.5c
+share/nickle/test/hashtest.5c
+share/nickle/test/inttest.5c
+share/nickle/test/is_type.5c
+share/nickle/test/jsontest.5c
+share/nickle/test/math-tables.5c
+share/nickle/test/math.5c
+share/nickle/test/modtest.5c
+share/nickle/test/optest.5c
+share/nickle/test/orderofoptest.5c
+share/nickle/test/rattest.5c
+share/nickle/test/reftest.5c
+share/nickle/test/round.5c
+share/nickle/test/scanf.5c
+share/nickle/test/signal.5c
diff -r 0b479a1c5301 -r 02802d48c63a math/nickle/distinfo
--- a/math/nickle/distinfo      Sun Dec 02 06:48:05 2018 +0000
+++ b/math/nickle/distinfo      Sun Dec 02 06:49:24 2018 +0000
@@ -1,9 +1,9 @@
-$NetBSD: distinfo,v 1.13 2018/01/03 12:12:07 jperkin Exp $
+$NetBSD: distinfo,v 1.14 2018/12/02 06:49:24 wiz Exp $
 
-SHA1 (nickle-2.81.tar.gz) = ef9c6de7ad2a544a3245657fbfd46dbfa9675476
-RMD160 (nickle-2.81.tar.gz) = 03c8ffbebfd0104b3cd54f748f702de7e6f999f5
-SHA512 (nickle-2.81.tar.gz) = b11755f824b3abf74f104db7bfaf58f52fef0b76e194ffd8c562693d5497f9de69121f9ce98777fb0366a7e02be7b32e7d800a31be03f5a5921b9d8bc3502aca
-Size (nickle-2.81.tar.gz) = 579140 bytes
+SHA1 (nickle-2.84.tar.gz) = ce346b5ba0cd0085dfd1a1351d03ffa8faeb3368
+RMD160 (nickle-2.84.tar.gz) = 4c34eaa038dbae546467c652a02953dccaa128de
+SHA512 (nickle-2.84.tar.gz) = ded33c3b2e6f8234e48148b2590db4a48653f3e85ec8ae7d94f63a6d0a7e03b2990af2ccdbd0982b92a980cecf68f016775f6d6f583918add3ca34d9fa0e7d62
+Size (nickle-2.84.tar.gz) = 810473 bytes
 SHA1 (patch-aa) = 4cbb563244883f6c9f7a3594875052f8d9a9e9b3
-SHA1 (patch-builtin-date.c) = ca55181a501cfbe3437d38728398852e96b0111a
+SHA1 (patch-builtin-date.c) = 1aa792b5a91f4b808208e73ee38bd539ab0c12fb
 SHA1 (patch-lex.c) = f9d5f3f282f97a94195730062525e9f6310bb316
diff -r 0b479a1c5301 -r 02802d48c63a math/nickle/patches/patch-builtin-date.c
--- a/math/nickle/patches/patch-builtin-date.c  Sun Dec 02 06:48:05 2018 +0000
+++ b/math/nickle/patches/patch-builtin-date.c  Sun Dec 02 06:49:24 2018 +0000
@@ -1,9 +1,9 @@
-$NetBSD: patch-builtin-date.c,v 1.1 2018/01/03 12:12:07 jperkin Exp $
+$NetBSD: patch-builtin-date.c,v 1.2 2018/12/02 06:49:24 wiz Exp $
 
 Fix missing tm_zone on SunOS.
 Pull in upstream fix for missing timelocal().
 
---- builtin-date.c.orig        2017-11-14 10:30:06.000000000 +0000
+--- builtin-date.c.orig        2018-09-24 21:43:45.000000000 +0000
 +++ builtin-date.c
 @@ -76,7 +76,11 @@ to_date(struct tm *tm)
      BoxValueSet (box, 6, int_value(tm->tm_wday));
@@ -27,12 +27,3 @@
  }
  
  static Value
-@@ -143,7 +149,7 @@ do_Date_timelocal(Value v)
-     time_t    seconds;
- 
-     from_date(v, &tm);
--    seconds = timelocal(&tm);
-+    seconds = mktime(&tm);
-     RETURN(Reduce(NewSignedDigitInteger((signed_digit) seconds)));
- }
- 



Home | Main Index | Thread Index | Old Index