The following reply was made to PR pkg/30258; it has been noted by GNATS.

From: "Ja'far Railton" <ibn.richard@gmail.com>
To: gnats-bugs@netbsd.org
Cc: mycroft@netbsd.org
Subject: Re: kern/30258
Date: Mon, 26 Dec 2005 06:49:21 +0000

 On Mon, Dec 19, 2005 at 08:34:10PM +0000, Ja'far Railton wrote:
  Charles 
  
 I am told you may be interested in this issue, viz., PCMCIA modem works
 on netbsd-2 but not on netbsd-3/-current. 
 
 Please see the PR referenced above. Thanks in advance. 
 
 dmesg attached
 
 -- 
 Ja'far ibn Richard Railton
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
 > Copyright (c) 1982, 1986, 1989, 1991, 1993
 >     The Regents of the University of California.  All rights reserved.
 > 
 > NetBSD 3.99.14 (DEBUG) #1: Sat Dec 17 20:21:02 UTC 2005
 > 	jr0@think.netbsd.bsd:/usr/obj/sys/arch/i386/compile/DEBUG
 > total memory = 247 MB
 > avail memory = 236 MB
 > BIOS32 rev. 0 found at 0xf0210
 > PCI BIOS rev. 2.1 found at 0xf0200
 > pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
 > PCI IRQ Routing Table rev. 1.0 found at 0xfb9d0, size 192 bytes (10 entries)
 > PCI Interrupt Router at 000:07:0 (Acer Labs M1543 PCI-ISA Bridge compatible)
 > ------------------------------------------
 >   device vendor product pin PIRQ IRQ stage
 > ------------------------------------------
 > 000:06:0 0x10b9 0x5451   A  0x07  11  0    already assigned
 > 000:10:0 0x8086 0x1229   A  0x01  11  0    already assigned
 > 000:19:0 0x1217 0x6972   A  0x03  11  0    already assigned
 > ------------------------------------------
 > mainbus0 (root)
 > pci_addr_fixup: 000:19:0 0x1217 0x6972 new address 0x0f800000
 > cpu0 at mainbus0: (uniprocessor)
 > cpu0: Intel Pentium III (686-class), 996.44 MHz, id 0x68a
 > cpu0: features 387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
 > cpu0: features 387f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
 > cpu0: features 387f9ff<FXSR,SSE>
 > cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
 > cpu0: L2 cache 256 KB 32B/line 8-way
 > cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
 > cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
 > cpu0: serial number 0000-068a-0003-e1a6-4891-6365
 > cpu0: 8 page colors
 > pci0 at mainbus0 bus 0: configuration mode 1
 > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 > pchb0 at pci0 dev 0 function 0
 > pchb0: Acer Labs product 0x1621 (rev. 0x01)
 > agp at pchb0 not configured
 > ppb0 at pci0 dev 1 function 0: Acer Labs product 0x5247 (rev. 0x01)
 > pci1 at ppb0 bus 1
 > pci1: i/o space, memory space enabled
 > vga1 at pci1 dev 0 function 0: Trident Microsystems product 0x8620 (rev. 0x5d)
 > wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 > wsmux1: connecting to wsdisplay0
 > autri0 at pci0 dev 6 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x01)
 > autri0: interrupting at irq 11
 > autri0: ac97: Avance Logic ALC200/ALC201 codec; headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
 > audio0 at autri0: full duplex, mmap, independent
 > midi0 at autri0: 4DWAVE MIDI UART
 > pcib0 at pci0 dev 7 function 0
 > pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
 > fxp0 at pci0 dev 10 function 0: i82550 Ethernet, rev 13
 > fxp0: interrupting at irq 11
 > fxp0: Ethernet address 00:00:e2:56:c1:da
 > inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > aceride0 at pci0 dev 16 function 0
 > aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
 > aceride0: bus-master DMA support present
 > aceride0: primary channel configured to compatibility mode
 > aceride0: primary channel interrupting at irq 14
 > atabus0 at aceride0 channel 0
 > aceride0: secondary channel configured to compatibility mode
 > aceride0: secondary channel interrupting at irq 15
 > atabus1 at aceride0 channel 1
 > Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
 > cbb0 at pci0 dev 19 function 0: O2 Micro OZ6912/OZ6972 PCI-CardBus Bridge (rev. 0x00)
 > ohci0 at pci0 dev 20 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
 > ohci0: interrupting at irq 10
 > ohci0: OHCI version 1.0, legacy support
 > usb0 at ohci0: USB revision 1.0
 > uhub0 at usb0
 > uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 > uhub0: 4 ports with 4 removable, self powered
 > isa0 at pcib0
 > lpt2 at isa0 port 0x3bc-0x3bf irq : polled
 > pckbc0 at isa0 port 0x60-0x64
 > pckbd0 at pckbc0 (kbd slot)
 > pckbc0: using irq 1 for kbd slot
 > wskbd0 at pckbd0: console keyboard, using wsdisplay0
 > pms0 at pckbc0 (aux slot)
 > pckbc0: using irq 12 for aux slot
 > wsmouse0 at pms0 mux 0
 > attimer0 at isa0 port 0x40-0x43: AT Timer
 > pcppi0 at isa0 port 0x61
 > midi1 at pcppi0: PC speaker
 > sysbeep0 at pcppi0
 > isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 > npx0 at isa0 port 0xf0-0xff: using exception 16
 > pcppi0: attached to attimer0
 > isapnp0: no ISA Plug 'n Play devices found
 > cbb0: interrupting at irq 11
 > cardslot0 at cbb0 slot 0 flags 0
 > cardbus0 at cardslot0: bus 2
 > pcmcia0 at cardslot0
 > apm0 at mainbus0: Power Management spec V1.2
 > Kernelized RAIDframe activated
 > cbb0: wait took 0.049218s
 > pcmcia0: ++enabled_count = 1
 > pcmcia0: CIS version PC Card Standard 5.1
 > pcmcia0: CIS info: Billionton V92 Fax Modem, FM56C-BFS, 5.41
 > pcmcia0: Manufacturer code 0x14e, product 0x88
 > pcmcia0: function 0: serial port, ccr addr 100 mask 13
 > pcmcia0: function 0, config table entry 32: I/O card; irq mask 10; iomask a, iospace 3f8-3ff; mwait_required io8 irqlevel powerdown audio
 > pcmcia0: function 0, config table entry 33: I/O card; irq mask 10; iomask a, iospace 2f8-2ff; mwait_required io8 irqlevel powerdown audio
 > pcmcia0: function 0, config table entry 34: I/O card; irq mask 10; iomask a, iospace 3e8-3ef; mwait_required io8 irqlevel powerdown audio
 > pcmcia0: function 0, config table entry 35: I/O card; irq mask 10; iomask a, iospace 2e8-2ef; mwait_required io8 irqlevel powerdown audio
 > pcmcia0: function 0, config table entry 36: I/O card; irq mask 1cb8; iomask 3, iospace 0-7; mwait_required io8 irqlevel powerdown audio
 > pcmcia0: function 0, config table entry 48: I/O card; irq mask 10; iomask 3, iospace 0-7; mwait_required io8 irqlevel powerdown audio
 > com3 at pcmcia0 function 0: <Billionton V92 Fax Modem, FM56C-BFS, 5.41>
 > pcmcia_config_alloc: io 0 start=3f8 length=8 align=400 skew=3f8
 > window iobase 4000 iomax 4007
 > function iobase 4000 iomax 4007
 > pcmcia0: ++enabled_count = 2
 > pcmcia0: function 0 CCR at 0 offset 100: 60 8 ff 0, 3 20 ff 24, ff
 > com3: ns8250 or ns16450, no fifo
 > pcmcia0: --enabled_count = 1
 > pcmcia0: --enabled_count = 0
 > wd0 at atabus0 drive 0: <FUJITSU MHT2040AS>
 > wd0: drive supports 16-sector PIO transfers, LBA addressing
 > wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
 > wd0: 32-bit data port
 > wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 > wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
 > atapibus0 at atabus1: 2 targets
 > cd0 at atapibus0 drive 0: <CD-224E, , 2.7B> cdrom removable
 > cd0: 32-bit data port
 > cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 > cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 > boot device: wd0
 > root on wd0a dumps on wd0b
 > root file system type: ffs
 > cbb0: wait took 0.049686s
 > pcmcia0: ++enabled_count = 1
 > pcmcia0: function 0 CCR at 0 offset 100: 60 8 ff 0, 3 20 ff 24, ff
 > pcmcia0: --enabled_count = 0
 > wsdisplay0: screen 1 added (80x25, vt100 emulation)
 > wsdisplay0: screen 2 added (80x25, vt100 emulation)
 > wsdisplay0: screen 3 added (80x25, vt100 emulation)
 > wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 
 -- 
 Ja'far ibn Richard Railton