On Wed, May 24, 2006 at 02:23:53AM +0200, Pavel Cahyna wrote:

> Please send us your dmesg.

Below. Of course, it's "normal" dmesg - I cannot send the one after I'll
attach the second drive, from the reason I wrote about.

> The problematic drive does not have to be attached.

What you mean? I want to copy a files from there...

=======================================================================
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.17 (DEBIAN) #0: Mon Apr 10 06:00:07 CEST 2006
	root@NetBSD.:/usr/src/sys/arch/i386/compile/DEBIAN
total memory = 255 MB
avail memory = 246 MB
BIOS32 rev. 0 found at 0xfb4f0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (686-class), 400.93 MHz, id 0x652
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <IntelR,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0700 at acpi0 not configured
PNP0303 at acpi0 not configured
PNP0C0B at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 85.0C
acpitz0: critical 90.0C passive 0.0C
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: NVIDIA GeForce4 MX 440 (AGP8X) (rev. 0xa4)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel ignored (disabled)
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus0 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB (PIIX4) Power Management Controller (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
ex0 at pci0 dev 11 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at irq 12
ex0: MAC address 00:50:04:34:fd:c1
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sigma Designs REALmagic Hollywood-Plus MPEG-2 Decoder (miscellaneous multimedia, revision 0x01) at pci0 dev 13 function 0 not configured
bktr0 at pci0 dev 15 function 0
bktr0: interrupting at irq 7
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner.
radio0 at bktr0
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x02) at pci0 dev 15 function 1 not configured
hptide0 at pci0 dev 19 function 0
hptide0: Triones/Highpoint HPT370 IDE Controller
hptide0: bus-master DMA support present
hptide0: primary channel wired to native-PCI mode
hptide0: using irq 10 for native-PCI interrupt
atabus1 at hptide0 channel 0
hptide0: secondary channel wired to native-PCI mode
atabus2 at hptide0 channel 1
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
isapnp0: No current device for tag, card 1
guspnp0 at isapnp0 port 0x220/16,0x320/8,0x32c/4 irq 11 drq 5,7
guspnp0: UltraSound Plug & Play Synth & Codec
guspnp0: bank[0]: 256K, bank[1]: 256K, bank[2]: 1024K, bank[3]: 1024K
guspnp0: interwave version 1.26
audio0 at guspnp0: full duplex, mmap
isapnp0: <UltraSound Plug & Play, GRV0011, , Disabled Device> not configured
joy0 at isapnp0 port 0x201/1
joy0: UltraSound Plug & Play Game Port
joy0: joystick not connected
isapnp0: <UltraSound Plug & Play, GRV0003, , SB Compatible A> port 0x388/2 irq 5 drq 1 not configured
isapnp0: <UltraSound Plug & Play, GRV0004, , MPU-401 GM Musi> port 0x330/2 not configured
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST RW/DVD GCC-4480B, , 1.02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
sd0 at atapibus0 drive 1: <IOMEGA  ZIP 100       ATAPI, , 23.D> disk removable
sd0: drive offline
sd0: 32-bit data port
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0(piixide0:1:1): using PIO mode 3
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Mouse M-BA47, rev 1.00/1.20, addr 2, iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
wd0 at atabus1 drive 0: <ST340014A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(hptide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
sd0(piixide0:1:1):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(piixide0:1:1):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(piixide0:1:1):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(piixide0:1:1):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0h dumps on wd0b
root file system type: ffs
ex0: link state changed to DOWN
ex0: link state changed to UP
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

-- 
				pozdrawiam / regards

						Zbigniew Baniewski