NetBSD-Ports archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

RE: Support for Supermicro X10DRL-C



Oops

My bad yes I did do that,, booted with one and can see all CPUs/cores..
Thanks you for your help..

Derrick

-----Original Message-----
From: Masanobu SAITOH <msaitoh%execsw.org@localhost> 
Sent: Tuesday, November 6, 2018 9:38 PM
To: Derrick Lobo <derrick%givex.com@localhost>; netbsd-users%NetBSD.org@localhost;
port-amd64%netbsd.org@localhost; netbsd-ports%netbsd.org@localhost; tech-ports%netbsd.org@localhost
Cc: msaitoh%execsw.org@localhost; 'Jaromír Doleček' <jaromir.dolecek%gmail.com@localhost>;
msaitoh%netbsd.org@localhost
Subject: Re: Support for Supermicro X10DRL-C

Hi.

On 2018/11/07 6:22, Derrick Lobo wrote:
> Anyone can provide any updates on this, have I contacted the correct 
> netbsd port..

As mlelstv@ replied in netbsd-users@:

http://mail-index.netbsd.org/netbsd-users/2018/10/30/msg021611.html
> But I don't see any ACPI reference in that dmesg. Do you boot with 
> ACPI disabled?

  your dmesg output said it booted neither ACPI nor SMP support.

In /boot.cfg:
> menu=Boot normally:rndseed /var/db/entropy-file;boot netbsd menu=Boot 
> single user:rndseed /var/db/entropy-file;boot netbsd -s menu=Disable 
> ACPI:rndseed /var/db/entropy-file;boot netbsd -2 menu=Disable ACPI and 
> SMP:rndseed /var/db/entropy-file;boot netbsd -12 menu=Drop to boot 
> prompt:prompt
> default=1
> timeout=5
> clear=1

I suspect you selected 4 or you changed "default=1" to 4.
I you got problem with the normal configuration (default=1), it would be
good to report the problem.


  msaitoh


>   
> 
> Jaromir/Masanobu adding you both in since you assisted with the 
> pervious hardware.
> 
>   
> 
> Derrick
> 
>   
> 
> From: Derrick Lobo <derrick%givex.com@localhost>
> Sent: Tuesday, October 30, 2018 11:03 AM
> To: netbsd-users%NetBSD.org@localhost; port-amd64%netbsd.org@localhost; 
> netbsd-ports%netbsd.org@localhost; tech-ports%netbsd.org@localhost
> Subject: Support for Supermicro X10DRL-C
> 
>   
> 
> Managed to get my hands on this new hardware,  added a SAS card to get 
> the disks recognized  however noticed that netbsd shows only one CPU.. 
> the server has 2 CPU and should total 70 cores tried this with netbsd 
> 7.2 , 8 and then 8.0current from Oct22
> 
>   
> 
> Im able to see all cores when I use  the iso for freebsd 11.2
> 
>   
> 
> Here is the dmesg Also wondering if the fix will be ported to netbsd 8 
> or will this 8.1 or 9
> 
>   
> 
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 
> 2005,
> 
>      2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 
> 2017,
> 
>      2018 The NetBSD Foundation, Inc.  All rights reserved.
> 
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> 
>      The Regents of the University of California.  All rights reserved.
> 
>   
> 
> NetBSD 8.0_STABLE (GENERIC) #0: Mon Oct 22 07:42:27 UTC 2018
> 
>          
> mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
> <mailto:mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GEN
> ERIC>
> 
> total memory = 127 GB
> 
> avail memory = 124 GB
> 
> cpu_rng: RDSEED
> 
> timecounter: Timecounters tick every 10.000 msec
> 
> Kernelized RAIDframe activated
> 
> running cgd selftest aes-xts-256 aes-xts-512 done
> 
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> 
> Supermicro Super Server (0123456789)
> 
> mainbus0 (root)
> 
> cpu0 at mainbus0
> 
> cpu0: Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz, id 0x406f1
> 
> cpu0: package 0, core 0, smt 0
> 
> ipmi0 at mainbus0
> 
> pci0 at mainbus0 bus 0: configuration mode 1
> 
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> 
> pchb0 at pci0 dev 0 function 0: vendor 8086 product 6f00 (rev. 0x01)
> 
> ppb0 at pci0 dev 1 function 0: vendor 8086 product 6f02 (rev. 0x01)
> 
> ppb0: PCI Express capability version 2 <Root Port of PCI-E Root 
> Complex> x8 @ 8.0GT/s
> 
> pci1 at ppb0 bus 1
> 
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> 
> vendor 1000 product 005d (RAID mass storage, revision 0x02) at pci1 
> dev 0 function 0 not configured
> 
> ppb1 at pci0 dev 2 function 0: vendor 8086 product 6f04 (rev. 0x01)
> 
> ppb1: PCI Express capability version 2 <Root Port of PCI-E Root 
> Complex> x8 @ 8.0GT/s
> 
> pci2 at ppb1 bus 2
> 
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> 
> ppb2 at pci0 dev 2 function 2: vendor 8086 product 6f06 (rev. 0x01)
> 
> ppb2: PCI Express capability version 2 <Root Port of PCI-E Root 
> Complex> x8 @ 8.0GT/s
> 
> ppb2: link is x8 @ 5.0GT/s
> 
> pci3 at ppb2 bus 3
> 
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> 
> mfi0 at pci3 dev 0 function 0: vendor 0x1000 product 0x9240
> 
> mfi0: interrupting at irq 11
> 
> mfi0: MegaRAID SAS MR9240-8i version 20.5.1-0003
> 
> mfi0: logical drives 1, 0MB RAM, BBU not present
> 
> scsibus0 at mfi0: 64 targets, 8 luns per target
> 
> ppb3 at pci0 dev 3 function 0: vendor 8086 product 6f08 (rev. 0x01)
> 
> ppb3: PCI Express capability version 2 <Root Port of PCI-E Root 
> Complex> x16 @ 8.0GT/s
> 
> pci4 at ppb3 bus 4
> 
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> 
> vendor 8086 product 6f20 (miscellaneous system, revision 0x01) at pci0 
> dev 4 function 0 not configured
> 
> vendor 8086 product 6f21 (miscellaneous system, revision 0x01) at pci0 
> dev 4 function 1 not configured
> 
> vendor 8086 product 6f22 (miscellaneous system, revision 0x01) at pci0 
> dev 4 function 2 not configured
> 
> vendor 8086 product 6f23 (miscellaneous system, revision 0x01) at pci0 
> dev 4 function 3 not configured
> 
> vendor 8086 product 6f24 (miscellaneous system, revision 0x01) at pci0 
> dev 4 function 4 not configured
> 
> vendor 8086 product 6f25 (miscellaneous system, revision 0x01) at pci0 
> dev 4 function 5 not configured
> 
> vendor 8086 product 6f26 (miscellaneous system, revision 0x01) at pci0 
> dev 4 function 6 not configured
> 
> vendor 8086 product 6f27 (miscellaneous system, revision 0x01) at pci0 
> dev 4 function 7 not configured
> 
> vendor 8086 product 6f28 (miscellaneous system, revision 0x01) at pci0 
> dev 5 function 0 not configured
> 
> vendor 8086 product 6f29 (miscellaneous system, revision 0x01) at pci0 
> dev 5 function 1 not configured
> 
> vendor 8086 product 6f2a (miscellaneous system, revision 0x01) at pci0 
> dev 5 function 2 not configured
> 
> vendor 8086 product 6f2c (interrupt system, IO(x) APIC, revision 0x01) 
> at
> pci0 dev 5 function 4 not configured
> 
> vendor 8086 product 8d7c (undefined, subclass 0x00, revision 0x05) at 
> pci0 dev 17 function 0 not configured
> 
> xhci0 at pci0 dev 20 function 0: vendor 8086 product 8d31 (rev. 0x05)
> 
> xhci0: interrupting at irq 11
> 
> xhci0: xHCI version 1.0
> 
> usb0 at xhci0: USB revision 3.0
> 
> usb1 at xhci0: USB revision 2.0
> 
> vendor 8086 product 8d3a (miscellaneous communications, revision 0x05) 
> at
> pci0 dev 22 function 0 not configured
> 
> vendor 8086 product 8d3b (miscellaneous communications, revision 0x05) 
> at
> pci0 dev 22 function 1 not configured
> 
> ehci0 at pci0 dev 26 function 0: vendor 8086 product 8d2d (rev. 0x05)
> 
> ehci0: interrupting at irq 5
> 
> ehci0: BIOS has given up ownership
> 
> ehci0: EHCI version 1.0
> 
> usb2 at ehci0: USB revision 2.0
> 
> ppb4 at pci0 dev 28 function 0: vendor 8086 product 8d10 (rev. 0xd5)
> 
> ppb4: PCI Express capability version 2 <Root Port of PCI-E Root 
> Complex> x1 @ 5.0GT/s
> 
> ppb4: link is x1 @ 2.5GT/s
> 
> pci5 at ppb4 bus 5
> 
> pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> 
> ppb5 at pci5 dev 0 function 0: vendor 1a03 product 1150 (rev. 0x03)
> 
> ppb5: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
> 
> pci6 at ppb5 bus 6
> 
> pci6: i/o space, memory space enabled, rd/line, wr/inv ok
> 
> vga0 at pci6 dev 0 function 0: vendor 1a03 product 2000 (rev. 0x30)
> 
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
> 
> wsmux1: connecting to wsdisplay0
> 
> drm at vga0 not configured
> 
> ppb6 at pci0 dev 28 function 2: vendor 8086 product 8d14 (rev. 0xd5)
> 
> ppb6: PCI Express capability version 2 <Root Port of PCI-E Root 
> Complex> x1 @ 5.0GT/s
> 
> ppb6: link is x1 @ 2.5GT/s
> 
> pci7 at ppb6 bus 7
> 
> pci7: i/o space, memory space enabled, rd/line, wr/inv ok
> 
> wm0 at pci7 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 
> 0x03)
> 
> wm0: interrupting at irq 5
> 
> wm0: PCI-Express bus
> 
> wm0: 2048 words FLASH(HW), version 3.25, Image Unique ID 000005cc
> 
> wm0: Ethernet address ac:1f:6b:67:b0:8e
> 
> wm0: Copper
> 
> wm0: 0x8014500<FLASH_HW,IOH_VALID,PCIE,NEWQUEUE>
> 
> ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
> 
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-FDX, auto
> 
> ppb7 at pci0 dev 28 function 3: vendor 8086 product 8d16 (rev. 0xd5)
> 
> ppb7: PCI Express capability version 2 <Root Port of PCI-E Root 
> Complex> x1 @ 5.0GT/s
> 
> ppb7: link is x1 @ 2.5GT/s
> 
> pci8 at ppb7 bus 8
> 
> pci8: i/o space, memory space enabled, rd/line, wr/inv ok
> 
> wm1 at pci8 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 
> 0x03)
> 
> wm1: interrupting at irq 11
> 
> wm1: PCI-Express bus
> 
> wm1: 2048 words FLASH(HW), version 3.25, Image Unique ID 000005d0
> 
> wm1: Ethernet address ac:1f:6b:67:b0:8f
> 
> wm1: Copper
> 
> wm1: 0x8014500<FLASH_HW,IOH_VALID,PCIE,NEWQUEUE>
> 
> ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
> 
> ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-FDX, auto
> 
> ehci1 at pci0 dev 29 function 0: vendor 8086 product 8d26 (rev. 0x05)
> 
> ehci1: interrupting at irq 5
> 
> ehci1: BIOS has given up ownership
> 
> ehci1: EHCI version 1.0
> 
> usb3 at ehci1: USB revision 2.0
> 
> ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8d44 (rev. 
> 0x05)
> 
> timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
> 
> ichlpcib0: 24-bit timer
> 
> tco0 at ichlpcib0: TCO (watchdog) timer configured.
> 
> tco0: Min/Max interval 1/367 seconds
> 
> ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8d02 (rev. 
> 0x05)
> 
> ahcisata0: interrupting at irq 11
> 
> ahcisata0: 64-bit DMA
> 
> ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 
> 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
> 
> atabus0 at ahcisata0 channel 0
> 
> atabus1 at ahcisata0 channel 1
> 
> atabus2 at ahcisata0 channel 2
> 
> atabus3 at ahcisata0 channel 3
> 
> atabus4 at ahcisata0 channel 4
> 
> atabus5 at ahcisata0 channel 5
> 
> ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8d22 (rev. 
> 0x05)
> 
> ichsmb0: interrupting at irq 5
> 
> iic0 at ichsmb0: I2C bus
> 
> isa0 at ichlpcib0
> 
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> 
> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> 
> pckbc0 at isa0 port 0x60-0x64
> 
> pckbd0 at pckbc0 (kbd slot)
> 
> pckbc0: using irq 1 for kbd slot
> 
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> 
> pms0 at pckbc0 (aux slot)
> 
> pckbc0: using irq 12 for aux slot
> 
> wsmouse0 at pms0 mux 0
> 
> attimer0 at isa0 port 0x40-0x43
> 
> pcppi0 at isa0 port 0x61
> 
> spkr0 at pcppi0: PC Speaker
> 
> midi0 at pcppi0: PC speaker
> 
> sysbeep0 at pcppi0
> 
> attimer0: attached to pcppi0
> 
> coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
> 
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> 
> timecounter: Timecounter "TSC" frequency 2200090400 Hz quality 3000
> 
> scsibus0: waiting 2 seconds for devices to settle...
> 
> uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, 
> rev 1.00/1.00, addr 0
> 
> uhub0: 6 ports with 6 removable, self powered
> 
> uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, 
> rev 2.00/1.00, addr 0
> 
> uhub1: 15 ports with 15 removable, self powered
> 
> IPsec: Initialized Security Association Processing.
> 
> uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, 
> rev 2.00/1.00, addr 1
> 
> uhub2: 2 ports with 2 removable, self powered
> 
> uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, 
> rev 2.00/1.00, addr 1
> 
> uhub3: 2 ports with 2 removable, self powered
> 
> ahcisata0 port 3: device present, speed: 6.0Gb/s
> 
> ahcisata0 port 4: device present, speed: 1.5Gb/s
> 
> wd0 at atabus3 drive 0
> 
> wd0: <Samsung SSD 860 EVO 500GB>
> 
> wd0: drive supports 1-sector PIO transfers, LBA48 addressing
> 
> wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 
> sectors
> 
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
> (Ultra/133)
> 
> wd0(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
> (Ultra/133) (using DMA)
> 
> atapibus0 at atabus4: 1 targets
> 
> uhub4 at uhub1 port 11: ALCOR (0x58f) Generic USB Hub (0x9254), class 
> 9/0, rev 1.10/3.12, addr 1
> 
> cd0 at atapibus0 drive 0: <Slimtype DVD A  DS8ACSH, 435740502456, 
> LP5M> cdrom removable
> 
> uhub4: 4 ports with 4 removable, self powered
> 
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
> (Ultra/133)
> 
> cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
> (Ultra/133) (using DMA)
> 
> sd0 at scsibus0 target 0 lun 0: <LSI, MR9240-8i, 2.70> disk fixed
> 
> sd0: fabricating a geometry
> 
> sd0: 7152 GB, 7324218 cyl, 64 head, 32 sec, 512 bytes/sect x 
> 14999998464 sectors
> 
> sd0: fabricating a geometry
> 
> sd0: GPT GUID: f6eb22a4-2e03-441c-9bef-6160a7f2224f
> 
> dk0 at sd0: "00b3120b-939a-46c8-a153-eae53d5c7c44", 14999998397 blocks 
> at 34, type: ffs
> 
> sd0: tagged queueing
> 
> uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 8002 (0x8002), 
> class 9/0, rev 2.00/0.05, addr 2
> 
> uhub5: single transaction translator
> 
> uhub6 at uhub2 port 1: vendor 8087 (0x8087) product 800a (0x800a), 
> class 9/0, rev 2.00/0.05, addr 2
> 
> uhub6: single transaction translator
> 
> uhub5: 8 ports with 8 removable, self powered
> 
> uhub6: 6 ports with 6 removable, self powered
> 
> uhidev0 at uhub4 port 1 configuration 1 interface 0
> 
> uhidev0: Logitech (0x46d) USB Keyboard (0xc31c), rev 1.10/64.00, addr 
> 2, iclass 3/1
> 
> ukbd0 at uhidev0
> 
> wskbd1 at ukbd0 mux 1
> 
> wskbd1: connecting to wsdisplay0
> 
> uhidev1 at uhub4 port 1 configuration 1 interface 1
> 
> uhidev1: Logitech (0x46d) USB Keyboard (0xc31c), rev 1.10/64.00, addr 
> 2, iclass 3/0
> 
> uhidev1: 3 report ids
> 
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> 
> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
> 
> uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
> 
> uhidev2 at uhub4 port 2 configuration 1 interface 0
> 
> uhidev2: Logitech (0x46d) USB-PS/2 Optical Mouse (0xc040), rev 
> 2.00/24.30, addr 3, iclass 3/1
> 
> ums0 at uhidev2: 8 buttons, W and Z dirs
> 
> wsmouse1 at ums0 mux 0
> 
> uhidev3 at uhub4 port 3 configuration 1 interface 0
> 
> uhidev3: No brand (0x10d5) 2Port KVMSwicther (0x55a2), rev 1.10/1.00, 
> addr 4, iclass 3/0
> 
> ukbd1 at uhidev3
> 
> wskbd2 at ukbd1 mux 1
> 
> wskbd2: connecting to wsdisplay0
> 
> uhidev4 at uhub4 port 3 configuration 1 interface 1
> 
> uhidev4: No brand (0x10d5) 2Port KVMSwicther (0x55a2), rev 1.10/1.00, 
> addr 4, iclass 3/0
> 
> uhidev4: no input interrupt endpoint
> 
> uhub7 at uhub1 port 14: vendor 0000 (0000) product 0001 (0x01), class 
> 9/0, rev 2.00/0.00, addr 5
> 
> uhub7: single transaction translator
> 
> uhub7: 4 ports with 3 removable, self powered
> 
> uhidev5 at uhub7 port 1 configuration 1 interface 0
> 
> uhidev5: vendor 0557 (0x557) product 2419 (0x2419), rev 1.10/1.00, 
> addr 6, iclass 3/1
> 
> ukbd2 at uhidev5
> 
> wskbd3 at ukbd2 mux 1
> 
> wskbd3: connecting to wsdisplay0
> 
> uhidev6 at uhub7 port 1 configuration 1 interface 1
> 
> uhidev6: vendor 0557 (0x557) product 2419 (0x2419), rev 1.10/1.00, 
> addr 6, iclass 3/1
> 
> ums1 at uhidev6: 3 buttons and Z dir
> 
> wsmouse2 at ums1 mux 0
> 
> pad0: outputs: 44100Hz, 16-bit, stereo
> 
> audio0 at pad0: half duplex, playback, capture, mmap
> 
> pad0: Virtual format configured - Format SLINEAR, precision 16, 
> channels 2, frequency 44100
> 
> pad0: Latency: 139 milliseconds
> 
> spkr1 at audio0: PC Speaker (synthesized)
> 
> WARNING: 1 error while detecting hardware; check system log.
> 
> boot device: wd0
> 
> root on wd0a dumps on wd0b
> 
> root file system type: ffs
> 
> kern.module.path=/stand/amd64/8.0/modules
> 
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> 
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> 
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> 
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> 
> ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
> 
>   
> 
>   
> 
> Derrick Lobo
> 
>   
> 
> 


--
-----------------------------------------------
                 SAITOH Masanobu (msaitoh%execsw.org@localhost
                                  msaitoh%netbsd.org@localhost)


Home | Main Index | Thread Index | Old Index