Hi there,
I just installed a second 3ware escalade 8006 controller in a Netbsd 2.0.2
system (AMD 64). The first on runs fine since several month with two
mirrored 250 GB harddisks, the second (with two 50 GB HDs) seems to be fine,
but when I start newfs /dev/ld1e the formatting process is extremely slow
and all services stop working (ssh httpd smbd). due to the fact that the
system is a production server I had to cancel newfs but I need the new
Volume urgently.
Another strange thing: I use twedm to monitor the raid status.

twedm /dev/twe0

works fine, while

twedm /dev/twe1 fails, any ideas on that?


Thanks in advance

Arne





Here the dmesg output:

bash-3.00# dmesg
NetBSD 2.0.2 (GENERIC) #0: Tue Mar 22 04:58:56 UTC 2005
       
jmc@faith.netbsd.org:/home/builds/ab/netbsd-2-0-2-RELEASE/amd64/200503220140
Z-obj/home/builds/ab/netbsd-2-0-2-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 510 MB
avail memory = 484 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 2002.76 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x3188 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia Corporation GeForce FX 5200 (rev.
0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
twe0 at pci0 dev 11 function 0: 3ware Escalade
twe0: interrupting at irq 11
twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
twe0: Monitor ME7X 1.01.00.040, PCB Rev5    , Achip 3.20    , Pchip 1.30-66
twe0: port 0: HDS722525VLSA80                         238475 MB
twe0: port 1: HDS722525VLSA80                         238475 MB
ld0 at twe0 unit 0: TwinStor, status: Normal
ld0: 232 GB, 30401 cyl, 255 head, 63 sec, 512 bytes/sect x 488395120 sectors
twe1 at pci0 dev 12 function 0: 3ware Escalade
twe1: interrupting at irq 10
twe1: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
twe1: Monitor ME7X 1.01.00.040, PCB Rev5    , Achip 3.20    , Pchip 1.30-66
twe1: port 0: ST3500630AS                             476940 MB
twe1: port 1: ST3500630AS                             476940 MB
ld1 at twe1 unit 0: TwinStor, status: Normal
ld1: 465 GB, 60801 cyl, 255 head, 63 sec, 512 bytes/sect x 976771120 sectors
ex0 at pci0 dev 13 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
(rev. 0x78)
ex0: interrupting at irq 5
ex0: MAC address 00:0a:5e:52:b5:4f
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using irq 10 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at irq 14
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at irq 15
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller
(rev. 0x81)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller
(rev. 0x81)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller
(rev. 0x81)
uhci2: interrupting at irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller
(rev. 0x81)
uhci3: interrupting at irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20,
revision 0x86) at pci0 dev 16 function 4 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
Kernelized RAIDframe activated
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SDM2012C, , TU00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
NetBSD 2.0.2 (GENERIC) #0: Tue Mar 22 04:58:56 UTC 2005
       
jmc@faith.netbsd.org:/home/builds/ab/netbsd-2-0-2-RELEASE/amd64/200503220140
Z-obj/home/builds/ab/netbsd-2-0-2-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 510 MB
avail memory = 484 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 2002.76 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x3188 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia Corporation GeForce FX 5200 (rev.
0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
twe0 at pci0 dev 11 function 0: 3ware Escalade
twe0: interrupting at irq 11
twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
twe0: Monitor ME7X 1.01.00.040, PCB Rev5    , Achip 3.20    , Pchip 1.30-66
twe0: port 0: HDS722525VLSA80                         238475 MB
twe0: port 1: HDS722525VLSA80                         238475 MB
ld0 at twe0 unit 0: TwinStor, status: Normal
ld0: 232 GB, 30401 cyl, 255 head, 63 sec, 512 bytes/sect x 488395120 sectors
twe1 at pci0 dev 12 function 0: 3ware Escalade
twe1: interrupting at irq 10
twe1: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
twe1: Monitor ME7X 1.01.00.040, PCB Rev5    , Achip 3.20    , Pchip 1.30-66
twe1: port 0: ST3500630AS                             476940 MB
twe1: port 1: ST3500630AS                             476940 MB
ld1 at twe1 unit 0: TwinStor, status: Normal
ld1: 465 GB, 60801 cyl, 255 head, 63 sec, 512 bytes/sect x 976771120 sectors
ex0 at pci0 dev 13 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
(rev. 0x78)
ex0: interrupting at irq 5
ex0: MAC address 00:0a:5e:52:b5:4f
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using irq 10 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at irq 14
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at irq 15
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller
(rev. 0x81)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller
(rev. 0x81)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller
(rev. 0x81)
uhci2: interrupting at irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller
(rev. 0x81)
uhci3: interrupting at irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20,
revision 0x86) at pci0 dev 16 function 4 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
Kernelized RAIDframe activated
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SDM2012C, , TU00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
bash-3.00#