On Wednesday 19 October 2005 18:34, Quentin Garnier wrote:
> On Wed, Oct 19, 2005 at 06:26:06PM +0200, Thierry Lacoste wrote:
> > I can't use my Maxtor OneTouch II usb drive under both 2.0 and current.
> >
> > When I plug the disk I have those kernel messages:
> > Oct 19 17:25:27 sirius /netbsd: umass0 at uhub2 port 2 configuration 1
> > interface 0
> > Oct 19 17:25:27 sirius /netbsd:
> > Oct 19 17:25:27 sirius /netbsd: umass0: Maxtor OneTouch II, rev
> > 2.00/2.03, addr 2
> > Oct 19 17:25:27 sirius /netbsd: umass0: using SCSI over Bulk-Only
> > Oct 19 17:25:27 sirius /netbsd: scsibus0 at umass0: 2 targets, 1 lun per
> > target
> > Oct 19 17:25:27 sirius /netbsd: sd0 at scsibus0 target 0 lun 0: <Maxtor,
> > OneTouch II, 023g> disk fixed
> > Oct 19 17:25:27 sirius /netbsd: sd0: fabricating a geometry
> > Oct 19 17:25:27 sirius /netbsd: sd0: 279 GB, 286188 cyl, 64 head, 32 sec,
> > 512 bytes/sect x 586114704 sectors
> >
> > I can't mount it:
> > # mount -t msdos /dev/sd0d /mnt/usb/
> > Oct 19 17:26:19 sirius /netbsd: sd0: fabricating a geometry
> > mount_msdos: /dev/sd0d on /mnt/usb: Invalid argument
> >
> > Does someone know if this is supposed to work ?
> >
> > I'd like to backup sensitive production datas hosted on a 2.0 box
> > on a large removable media (usable from other OSes).
> > Any advice on a solution would be appreciated; I can buy some hardware.
>
> Try /dev/sd0e instead.
Sorry. I should have said that I already tried that:

# mount -t msdos /dev/sd0e /mnt/usb/
mount_msdos: /dev/sd0e on /mnt/usb: Device not configured