This is a multi-part message in MIME format.
--------------060001070304070408040207
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Hi! I configured raidframe exactly as told in 
http://www.netbsd.org/guide/en/chap-rf.html
system boots nicely from disk that is not in raid1 yet and mounts fine 
using raid0-devices.
But when I try to boot from disk that is configured in raidframe there 
just comes "could not open /boot", and boot hd0a:netbsd gives no such 
file or directory
(booting with single disk).
I have little clue whats this all about. If I add that other disk into 
raid (which does booting now) system doesnt boot at all, rebuilds raid 
ok and everything but same problem on boot like stated above.

dmesg attached, running generic 2.0.2 kernel.

Yours
Markus Kovero

--------------060001070304070408040207
Content-Type: text/plain;
 name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.txt"

NetBSD 2.0.2 (GENERIC) #0: Tue Mar 22 04:58:56 UTC 2005
        jmc@faith.netbsd.org:/home/builds/ab/netbsd-2-0-2-RELEASE/amd64/200503220140Z-obj/home/builds/ab/netbsd-2-0-2-RELEASE/
src/sys/arch/amd64/compile/GENERIC
total memory = 1023 MB
avail memory = 979 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2194.47 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Nvidia Corporation nForce3 Host-PCI bridge (rev. 0xa4)
pcib0 at pci0 dev 1 function 0
pcib0: Nvidia Corporation nForce3 PCI-ISA bridge (rev. 0xa6)
Nvidia Corporation nForce3 SMBus controller (SMBus serial bus, revision 0xa4) at pci0 dev 1 function 1 not configured
viaide0 at pci0 dev 8 function 0
viaide0: NVIDIA nForce3 IDE Controller (rev. 0xa5)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
ppb0 at pci0 dev 10 function 0: Nvidia Corporation nForce3 PCI-PCI bridge (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
gsip0 at pci1 dev 5 function 0: NatSemi DP83820 Gigabit Ethernet, rev 00
gsip0: interrupting at irq 10
gsip0: Ethernet address 00:0c:41:1a:19:e7
gphyter0 at gsip0 phy 1: DP83861 1000BASE-T media interface, rev. 2
gphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gphyter0: strapped to slave mode
VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus, interface 0x10, revision 0x80) at pci1 dev 6 function
0 not configured
satalink0 at pci1 dev 7 function 0
satalink0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using irq 11 for native-PCI interrupt
atabus2 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus3 at satalink0 channel 1
ppb1 at pci0 dev 11 function 0: Nvidia Corporation product 0x00d2 (rev. 0xa4)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
vga0 at pci2 dev 0 function 0: ATI Technologies Radeon 7000/VE (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
satalink0: port 0: device present, speed: 1.5Gb/s
satalink0: port 1: device present, speed: 1.5Gb/s
cd0 at atapibus0 drive 1: <ATAPI CDROM, , V120H> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd0 at atabus2 drive 0: <WDC WD740GD-00FLA0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 70911 MB, 144073 cyl, 16 head, 63 sec, 512 bytes/sect x 145226112 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
wd1 at atabus3 drive 0: <WDC WD740GD-00FLA0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 70911 MB, 144073 cyl, 16 head, 63 sec, 512 bytes/sect x 145226112 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
raid0: RAID Level 1
raid0: Components: component0[**FAILED**] /dev/wd1a
raid0: Total Sectors: 145225984 (70911 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--------------060001070304070408040207--