Hi,

I don't know what I was thinking. I should have included a little bit more
info:

First of all it is running 1.6.2_stable.

I read about having 2 different size simms could cause a problem.  So, I
pulled one and I will see if it can successfully build the world now.

Also, I built a special kernel because it would not use the hard drive
controller.

I changed:
#wd*            at pciide? channel ? drive ? flags 0x0000
to
wd*             at pciide? channel ? drive ? flags 0x0ff0

And I am wondering if this could be related to the problem.

Any idea would be helpful!

Thanks,
Al


On Thu, 12 May 2005, admin@agnus.datazap.net wrote:
> Hi All,
>
> I was building the world with a cobalt raq2 and it had a kernel panic. It
> acted like it could use its hard drive controler.
>
> Here is what I got from it:
> trap: address error (store) in kernel mode
> status=0x2, cause=0x14, epc=0x80161ba8, vaddr=0xc6a41e2
> pid=15155 cmd=cc1 usp=0x7fff80f0 ksp=0xc7489d30
> Stopped in pid 15155 (cc1) at   0x80161ba8:     sw      v0,0(a0)
>
>
> Then when I try to reboot it:
> db> reboot
> syncing disks... 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27
> 27 giving up
> wd0: flush cache command didn't complete
> rebooting...
>
> Any ideas?
>
> Thanks,
> Al
>