In article <20050223132727.19392.qmail@athenas.yan.com.br>,
Daniel Dias Gonçalves <ddg@yan.com.br> wrote:
>DMESG:  
>  
>NetBSD 2.0 (SRVCIL) #4: Thu Feb 17 13:30:33 BRST 2005   
>        root@servidor2:/usr/src/sys/arch/i386/compile/SRVCIL   
>total memory = 1023 MB   
>avail memory = 998 MB   
>BIOS32 rev. 0 found at 0xf0010   
>mainbus0 (root)   
>cpu0 at mainbus0: (uniprocessor)   
>cpu0: Intel (686-class), 2998.64 MHz, id 0xf41   
>cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>   
>cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>   
>cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>   
>cpu0: I-cache 12K uOp cache 8-way   
>cpu0: L2 cache 1 MB 64B/line 8-way   
>cpu0: ITLB 4K/4M: 64 entries   
>cpu0: DTLB 4K/4M: 64 entries   
>cpu0: 32 page colors   
>pci0 at mainbus0 bus 0: configuration mode 1   
>pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok   
>pchb0 at pci0 dev 0 function 0   
>pchb0: Intel 82865 Host (rev. 0x02)   
>agp0 at pchb0: aperture at 0xf8000000, size 0x4000000   
>ppb0 at pci0 dev 1 function 0: Intel 82865 AGP (rev. 0x02)   
>pci1 at ppb0 bus 1   
>pci1: i/o space, memory space enabled   
>vga0 at pci1 dev 0 function 0: Nvidia Corporation product 0x0185 (rev.   
>0xc1)   
>wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)   
>wsmux1: connecting to wsdisplay0   
>wsdisplay0: screen 1-6 added (80x25, vt100 emulation)   
>Intel 82801EB/ER USB UHCI Controller #0 (USB serial bus, revision 0x02) at   
>pci0 dev 29 function 0 not configured   
>Intel 82801EB/ER USB UHCI Controller #1 (USB serial bus, revision 0x02) at   
>pci0 dev 29 function 1 not configured   
>Intel 82801EB/ER USB UHCI Controller #2 (USB serial bus, revision 0x02) at   
>pci0 dev 29 function 2 not configured   
>Intel 82801EB/ER USB UHCI Controller #3 (USB serial bus, revision 0x02) at   
>pci0 dev 29 function 3 not configured   
>Intel 82801EB/ER USB EHCI Controller (USB serial bus, interface 0x20,   
>revision 0x02) at pci0 dev 29 function 7 not configured   
>ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev.   
>0xc2)   
>pci2 at ppb1 bus 2   
>pci2: i/o space, memory space enabled   
>skc0 at pci2 dev 5 function 0: irq 11   
>skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter   
>sk0 at skc0 port A: Ethernet address 00:11:2f:d5:83:83   
>makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5   
>makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,   
>1000baseT-FDX, auto   
>rtk0 at pci2 dev 11 function 0: Realtek 8139 10/100BaseTX   
>rtk0: interrupting at irq 11   
>rtk0: Ethernet address 00:40:f4:5b:c0:16   
>ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface   
>ukphy0: OUI 0x000000, model 0x0000, rev. 0   
>ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto   
>pcib0 at pci0 dev 31 function 0   
>pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)   
>piixide0 at pci0 dev 31 function 1   
>piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)   
>piixide0: bus-master DMA support present   
>piixide0: primary channel wired to compatibility mode   
>piixide0: primary channel interrupting at irq 14   
>atabus0 at piixide0 channel 0   
>piixide0: secondary channel wired to compatibility mode   
>piixide0: secondary channel interrupting at irq 15   
>atabus1 at piixide0 channel 1   
>piixide1 at pci0 dev 31 function 2   
>piixide1: Intel 82801EB Serial ATA Controller (rev. 0x02)   
>piixide1: bus-master DMA support present   
>piixide1: primary channel configured to native-PCI mode   
>piixide1: using irq 5 for native-PCI interrupt   
>atabus2 at piixide1 channel 0   
>piixide1: secondary channel configured to native-PCI mode   
>atabus3 at piixide1 channel 1   
>Intel 82801EB/ER SMBus Controller (SMBus serial bus, revision 0x02) at   
>pci0 dev 31 function 3 not configured   
>auich0 at pci0 dev 31 function 5: i82801EB (ICH5) AC-97 Audio   
>auich0: interrupting at irq 11   
>auich0: ac97: Analog Devices AD1985 codec; headphone, 20 bit DAC, no 3D   
>stereo   
>auich0: ac97: ext id 3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>   
>isa0 at pcib0   
>lpt0 at isa0 port 0x378-0x37b irq 7   
>com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo   
>com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo   
>pckbc0 at isa0 port 0x60-0x64   
>pckbd0 at pckbc0 (kbd slot)   
>pckbc0: using irq 1 for kbd slot   
>wskbd0 at pckbd0: console keyboard, using wsdisplay0   
>pms0 at pckbc0 (aux slot)   
>pckbc0: using irq 12 for aux slot   
>wsmouse0 at pms0 mux 0   
>pcppi0 at isa0 port 0x61   
>midi0 at pcppi0: PC speaker   
>sysbeep0 at pcppi0   
>isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support   
>npx0 at isa0 port 0xf0-0xff: using exception 16   
>fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2   
>isapnp0: no ISA Plug 'n Play devices found   
>auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz   
>audio0 at auich0: full duplex, mmap, independent   
>fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec   
>atapibus0 at atabus0: 2 targets   
>cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4120B, K1G47MB5839, A102>   
>cdrom removable   
>cd0: 32-bit data port   
>cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)   
>cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using   
>DMA data transfers)   
>wd0 at atabus2 drive 0: <ST3120026AS>   
>wd0: drive supports 16-sector PIO transfers, LBA48 addressing   
>wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648   
>sectors   
>wd0: 32-bit data port   
>wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)   
>wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using   
>DMA data transfers)   
>wd1 at atabus3 drive 0: <ST3120026AS>   
>wd1: drive supports 16-sector PIO transfers, LBA48 addressing   
>wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648   
>sectors   
>wd1: 32-bit data port   
>wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)   
>wd1(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using   
>DMA data transfers)   
>boot device: wd0   
>root on wd0a dumps on wd0b   
>mountroot: trying smbfs...   
>mountroot: trying msdos...   
>mountroot: trying cd9660...   
>mountroot: trying ntfs...   
>mountroot: trying nfs...   
>mountroot: trying ext2fs...   
>mountroot: trying ffs...   
>root file system type: ffs   
>init: copying out path `/sbin/init' 11   
>wsdisplay0: screen 7 added (80x25, vt100 emulation)   
>pmap_unwire: wiring for pmap 0xd37e5214 va 0x48115000 didn't change!   
>  
>What's this "pmap_unwire" error ?  
>The server has restarted unexpectedly without errors in logs file.  
>Constantly it shows the following error in all terminals:  
>syslogd: /dev/:0: No such file or directory  
>  
># w  
>10:25AM  up 25 mins, 3 users, load averages: 0.40, 0.40, 0.33  
>USER    TTY FROM              LOGIN@  IDLE WHAT  
>root     :0 -                10:03AM     0 -:0  
>root     p1 :0.0             10:04AM     1 -bin/tcsh  
>root     p2 :0.0             10:14AM     0 w  
>#  
> 
>Which the problem ? 

I don't know. What are you running that calls itself :0?

christos