Subject: CVS / SSH issue "Host key verification failed."
To: None <netbsd-help@netbsd.org>
From: jozzfest <jozzfest@gmail.com>
List: netbsd-help
Date: 01/26/2005 15:26:16
I've been trying to sync my source tree to 2.0 so that I can compile
it, after anoncvs was brought back online I could never get it to
complete properly.

For quite some time it would actually edit the files, sometimes I
received the error something like "moving file it is in the way" I
don't still have the exact.

It failed because of a couple of timeouts also.  Now it's currently
doing something way more funky:

[15:13:42][hobbes@titan] /usr $ cvs -d
anoncvs@anoncvs.netbsd.org:/cvsroot update -dPA -rnetbsd-2
Host key verification failed.
cvs [update aborted]: end of file from server (consult above messages if any)


After this happens, and until I restart sshd, I cannot ssh out from
the machine, I receive the same error.

I tried generating new host keys to no avail.

The box is a SparcStation 5 110mhz netbooted, it has a NFS-mounted root drive.

Any help anyone could provide would do wonders!

Thanks,
Joe


Here's the DMESG spam:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.2 (TITAN) #3: Fri Apr 30 13:03:35 EDT 2004
    root@titan.freudlevels.com:/usr/src/sys/arch/sparc/compile/TITAN
total memory = 127 MB
avail memory = 115 MB
using 896 buffers containing 6636 KB of memory
bootpath: /iommu@0,10000000/sbus@0,10001000/ledma@5,8400010/le@5,8c00000
mainbus0 (root): SUNW,SPARCstation-5
cpu0 at mainbus0: MB86904 @ 110 MHz, on-chip FPU
cpu0: 16K instruction (32 b/l), 8K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08: hostid 80767da7
timer0 at obio0 slot 0 offset 0xd00000: delay constant 52
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0: baud rate 1200
ms0 at zs1 channel 1: baud rate 1200
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
power0 at obio0 slot 0 offset 0x910000 level 2
fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached
iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0, page-size 4096, range 64MB
sbus0 at iommu0: clock = 22 MHz
dma0 at sbus0 slot 5 offset 0x8400000: dma rev 2
esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
bpp0 at sbus0 slot 5 offset 0xc800000 level 2 (ipl 3): dma rev 2
ledma0 at sbus0 slot 5 offset 0x8400010: dma rev 2
le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 08:00:20:76:7d:a7
le0: 8 receive buffers, 2 transmit buffers
audiocs0 at sbus0 slot 4 offset 0xc000000 level 9: CS4231A
audio0 at audiocs0: full duplex
power-management at sbus0 slot 4 offset 0xa000000 not configured
nell0 at sbus0 slot 2 offset 0x0 level 4 (ipl 7) level 7 (ipl 13): rev 1
pcmcia0 at nell0 socket 0
pcmcia1 at nell0 socket 1
wi0 at pcmcia1 function 0: Lucent Technologies, WaveLAN/IEEE, Version 01.01
wi0: 802.11 address 00:60:1d:23:2e:99
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.16.1)
hme0 at sbus0 slot 3 offset 0x8c00000 level 4 (ipl 7): Sun Happy Meal
Ethernet (SUNW,hme)
hme0: Ethernet address 08:00:20:76:7d:a7
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
scsibus0: waiting 2 seconds for devices to settle...
Kernelized RAIDframe activated
root on le0
nfs_boot: trying DHCP/BOOTP
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: client_addr=192.168.1.1 (RARP from 192.168.1.2)
nfs_boot: server_addr=192.168.1.2
nfs_boot: hostname=titan
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: timeout...
root on 192.168.1.2:/usr/export/titan
root file system type: nfs
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled