Subject: Re: rtk0 watchdog timeout
To: Torma Zsolt <torma.zsolt@sarabi.onyf.hu>
From: Roman Kennke <roman@ontographics.com>
List: netbsd-help
Date: 01/25/2005 15:57:54
--=-jSdDnhEO8IBB0/rHQhW/
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Am Dienstag, den 25.01.2005, 15:13 +0100 schrieb Torma Zsolt:
> OK, if you've created the partition for exchanging data, please send us y=
our
> dmesg output also.
Ok, here we go.
# ifconfig rtk0
rtk0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:02:3f:af:14:fd
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::202:3fff:feaf:14fd%rtk0 prefixlen 64 scopeid 0x1
# dmesg
NetBSD 2.0 (GENERIC) #0: Wed Dec 1 10:58:25 UTC 2004
builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/b=
uilds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory =3D 734 MB
avail memory =3D 710 MB
BIOS32 rev. 0 found at 0xfd740
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon (686-class), 1524.02 MHz, id 0x680
cpu0: features c3cbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c3cbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbf9ff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 256 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ATI Technologies product 0xcab0 (rev. 0x13)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: ATI Technologies product 0x700f (rev.
0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies Radeon IGP 320M (rev.
0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 2 function 0: Acer Labs M5237 USB Host Controller
(rev. 0x03)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Acer Labs product 0x5457 (modem communications) at pci0 dev 3 function 0
not configured
aceride0 at pci0 dev 4 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at
pci0 dev 6 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller
Audio Device (rev. 0x02)
autri0: interrupting at irq 11
autri0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18 bit
ADC, Realtek 3D
audio0 at autri0: full duplex, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
rtk0 at pci0 dev 9 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:02:3f:af:14:fd
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus,
interface 0x10, revision 0x46) at pci0 dev 10 function 0 not configured
cbb0 at pci0 dev 11 function 0: ENE Technology, Inc. CB1420 Cardbus
Controller (rev. 0x01)
cbb1 at pci0 dev 11 function 1: ENE Technology, Inc. CB1420 Cardbus
Controller (rev. 0x01)
ohci1 at pci0 dev 15 function 0: Acer Labs M5237 USB Host Controller
(rev. 0x03)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0
pcmcia1 at cardslot1
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MHR2030AT>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using
DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R2212, 828S715039, 1013>
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
--=-jSdDnhEO8IBB0/rHQhW/
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: Dies ist ein digital signierter Nachrichtenteil
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQBB9l5y3sO1VIw8IDoRAitqAKCfD/Y4Pp7xQHQKO5pgJXuz0chokQCg8E+W
uKMrC1zau05mFgruDyrOnVk=
=NCaj
-----END PGP SIGNATURE-----
--=-jSdDnhEO8IBB0/rHQhW/--