Dear NetBSD Help,

My Cisco Aironet PCMCIA wifi card that worked fine with an(4) under
NetBSD 1.6.2 i386 appears to be having problems with under NetBSD 2.0
i386 and is returning oversize frame errors.  I haven't made any
changes to the Linksys BEFW11S4 V2/V3 Wireless Access Point Router,
Firmware 1.45.10, or the Aironet card.  I tried a different Aironet
350 PCMCIA card and got the same kinds of messages, an excerpt of
which follows.  Any suggestions are appreciated!

Thanks!
Richard

-----

IPconfig messages - looks normal to me

/netbsd: an0 at pcmcia0 function 0: Cisco Systems, 350 Series Wireless
LAN Adapter
/netbsd: pcic0: port 0x400-0x43f
/netbsd: an0: Cisco Systems 350 Series (firmware 4.25.23)
/netbsd: an0: 802.11 address: 00:40:96:45:e1:fe, channel: 1-11
/netbsd: an0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
/netbsd: an0: pcmcia0: card irq 7

DHCP messages - returns oversize message

DHCPREQUEST on an0 to 255.255.255.255 port 67
ip length 576 disagrees with bytes received 578.
accepting packet with data after udp payload.

Usage messages after IP address assigned through DHCP - lots of
oversize mesages

/netbsd: an0: discarding oversize frame (len=1516)
last message repeated 11 times

-----