Hello,
 I am having trouble figuring out how to configure these devices, can
anyone suggest how this can be done?  I have included the dmesg output
as well.

Intel 82371AB Power Management Controller (PIIX4) (miscellaneous
bridge, revision 0x02) at pci0 dev 7 function 3 not configured
Aureal Semiconductor product 0x0002 (audio multimedia, revision 0xfe)
at pci0 dev 13 function 0 not configured
Zoran Corporation Video Controller (video multimedia, revision 0x03)
at pci0 dev 14 function 0 not configured


Thank you,
-- 
Mike


dmesg output --
NetBSD 2.0 (SERVER-$Revision: 0.3 $) #0: Wed Dec 15 01:56:49 EST 2004
       builder@server:/home/builder/usr/src/sys/arch/i386/compile/SERVER4
total memory = 383 MB
avail memory = 371 MB
BIOS32 rev. 0 found at 0xfd7a0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (686-class), 448.08 MHz, id 0x652
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT (rev. 0x04)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller
(PIIX4) (rev. 0x01)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous
bridge, revision 0x02) at pci0 dev 7 function 3 not configured
Aureal Semiconductor product 0x0002 (audio multimedia, revision 0xfe)
at pci0 dev 13 function 0 not configured
Zoran Corporation Video Controller (video multimedia, revision 0x03)
at pci0 dev 14 function 0 not configured
tlp0 at pci0 dev 15 function 0: ADMtek AN985 Ethernet, pass 1.1
tlp0: interrupting at irq 3
tlp0: Ethernet address xx:xx:xx:xx:xx:xx
acphy0 at tlp0 phy 1: ACXXX 10/100 media interface, rev. 0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <WDC WD400BB-00CAA1>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
(using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-M1202, 1900600132, 1020>
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd1 at atapibus0 drive 1: <Hewlett-Packard CD-Writer Plus 8200,
YM59303XRW, 1.0f> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
cd1(piixide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)