Here's the dmesg output:

cpu0: AMD K6-2 (586-class), 400.92 MHz
cpu0: I-cache 32 KB 32b/line 2-way, D-cache 32 KB 32b/line 2-way
cpu0: features 8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8021bf<PGE,MMX>
total memory = 191 MB
avail memory = 173 MB
using 2478 buffers containing 9912 KB of memory
BIOS32 rev. 0 found at 0xf0690
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs M1541 Host-PCI Bridge (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Acer Labs M5243 PCI-AGP Bridge (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0
dev 3 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0xc3)
eap0 at pci0 dev 9 function 0: Ensoniq CT5880 CT5880C (rev. 0x02)
eap0: interrupting at irq 5
eap0: SigmaTel STAC9708 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
rtk0 at pci0 dev 10 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 10
rtk0: Ethernet address 00:50:22:40:24:b6
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0 at pci0 dev 13 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at irq 5
ex0: MAC address 00:10:5a:75:a9:ab
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide0 at pci0 dev 15 function 0: Acer Labs M5229 UDMA IDE Controller
(rev. 0xc1)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV3063H>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29198 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 59797584 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
biomask eb45 netmask ef65 ttymask ffe7
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
set{u,g}id pid 1486 (netstat) was invoked by uid 1000 ppid 1271
(MozillaFirebird-) with fd 0 closed
arp info overwritten for 80.221.24.1 by 00:03:4b:15:4c:e1
arp info overwritten for 80.221.24.1 by 00:03:4b:15:4e:77


-- 
Matti Taina
Porofarmi.net