> Right. You can just install 1.6.1, and then compile and install a -current
> kernel.
i've got a new GENERIC -current kernel but i can still see only one 
processor in my dmesg output (i paste the whole dmesg output here just 
not to miss any important information):

NetBSD 1.6ZC (GENERIC) #0: Wed Sep 17 16:14:55 CEST 2003
	shnek@snail:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 466 MB
using 6144 buffers containing 26296 KB of memory
BIOS32 rev. 0 found at 0xfb290
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 801.90 MHz, id 0x686
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 256 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0686-0000-4994-AC6E-DA85
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0xc4)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) 
CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 Trio3D/2X (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x22)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo 
KX133) ATA66 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 1: <SONY CD-ROM CDU5221, MT1199-A Firmware, 0.30> 
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at pciide0 channel 0 drive 0: <ST320420A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19458 MB, 39535 cyl, 16 head, 63 sec, 512 bytes/sect x 39851760 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using 
DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
DMA data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
pchb1 at pci0 dev 7 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x30)
auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev H)
auvia0: interrupting at irq 11
auvia0: ac97: Winbond W83971D codec; KS Waves 3D
auvia0: ac97: ext id c000<SECONDARY10,SECONDARY01>
audio0 at auvia0: full duplex, independent
pciide1 at pci0 dev 12 function 0: Promise Ultra100/ATA Bus Master IDE 
Accelerator (rev. 0x02)
pciide1: bus-master DMA support present
pciide1: primary channel configured to native-PCI mode
pciide1: using irq 11 for native-PCI interrupt
pciide1: disabling primary channel (no drives)
pciide1: secondary channel configured to native-PCI mode
pciide1: disabling secondary channel (no drives)
fxp0 at pci0 dev 18 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:02:b3:26:3c:61
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

what does it mean? this board/these processors are not supported? i'm 
sure they are there and that they work. this machine used to be a part 
of linux cluster and both processors were used. am i doing something wrong?

regards,
lubos

-- 
#####################################################
Mgr. Lubos Vrbka

Center for Complex Molecular Systems and Biomolecules
J. Heyrovsky Institute of Physical Chemistry
Academy of Sciences of the Czech Republic
Prague, Czech Republic

http://www.ncbr.chemi.muni.cz/~shnek
#####################################################