Has anyone got the Logitech WingMan Rumbler to work with NetBSD?
My kernel now finds it, the lights come on for a few seconds
during the boot sequence, the system hangs for about 5sec, and the
the thing times out... (The lights on WingMan go out too!)

Here's my dmesg:

$ dmesg
dmesg
NetBSD 1.6 (GENERIC-ADP.950) #0: Sun Mar 30 08:42:53 EST 2003
    todd@gandalf.wanderer.us:/usr/src/sys/arch/i386/compile/GENERIC-ADP.950
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 950.07 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 255 MB
avail memory = 234 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xfb230
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 KT133 System Controller (rev. 0x03)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 KT133 PCI to AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
VIA Technologies VT82C586A IDE Controller (IDE mass storage, interface 0x8a, revision 0x06) at pci0 dev 7 function 1 not configured
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viapm0 at pci0 dev 7 function 4
viaenv0 at viapm0
VIA Technologies VT82C686A AC-97 Audio Controller (audio multimedia, revision 0x50) at pci0 dev 7 function 5 not configured
vga1 at pci0 dev 8 function 0: Matrox MGA Millennium II 2164W (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ahc0 at pci0 dev 9 function 0
ahc0: interrupting at irq 11
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 10 function 0
ahc1: interrupting at irq 10
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
rtk0 at pci0 dev 12 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 12
rtk0: Ethernet address 00:02:2a:b1:9e:87
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask ef65 netmask ff65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <IBM, DCHS04W, 6363> SCSI2 0/direct fixed
sd0: 4303 MB, 6077 cyl, 9 head, 161 sec, 512 bytes/sect x 8813870 sectors
sd0: sync (100.0ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
scsibus1: waiting 2 seconds for devices to settle...
st0 at scsibus1 target 2 lun 0: <EXABYTE, EXB-8505, 0052> SCSI2 1/sequential removable
st0: drive empty
st0: sync (200.0ns offset 11), 8-bit (5.000MB/s) transfers
cd0 at scsibus1 target 4 lun 0: <NEC, CD-ROM DRIVE:463, 1.05> SCSI2 5/cdrom removable
cd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers
sd1 at scsibus1 target 5 lun 0: <IOMEGA, ZIP 250, H.41> SCSI2 0/direct removable
sd1: drive offline
sd1: async, 8-bit transfers
uhub1: port 2, set config at addr 2 failed
uhub1: device problem, disabling port 2
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
IP Filter: v3.4.27 initialized.  Default = pass all, Logging = enabled
sd1: could not mode sense (4/5); using fictitious geometry
sd1: could not mode sense (4/5); using fictitious geometry
sd1: could not mode sense (4/5); using fictitious geometry
sd1: could not mode sense (4/5); using fictitious geometry
sd1: could not mode sense (4/5); using fictitious geometry
sd1: could not mode sense (4/5); using fictitious geometry
sd1: could not mode sense (4/5); using fictitious geometry
sd1: could not mode sense (4/5); using fictitious geometry

-- 
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup