Subject: Re: dumb local ethernet questions
To: None <reed@reedmedia.net>
From: None <markp@panix.com>
List: netbsd-help
Date: 11/11/2002 16:46:16 
| Please show us your configs.

okay. note that the output for 'cerebus' is transcribed by hand from
cerebus's console, but it's correct.

alidoro is 10.0.0.2, cerebus is 10.0.0.1.

alidoro# ifconfig -a
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33228
        inet 127.0.0.1 netmask 0xff000000
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet6 ::1 prefixlen 128
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
strip0: flags=0<> mtu 1100
strip1: flags=0<> mtu 1100
tun0: flags=10<POINTOPOINT> mtu 1500
tun1: flags=10<POINTOPOINT> mtu 1500
gre0: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
gre1: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
ipip0: flags=8010<POINTOPOINT,MULTICAST>
ipip1: flags=8010<POINTOPOINT,MULTICAST>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
ex0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:01:03:a8:80:28
        media: Ethernet autoselect (10baseT)
        status: active
        inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::201:3ff:fea8:8028%ex0 prefixlen 64 scopeid 0x12

cerebus# ifconfig -a
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33228
        inet 127.0.0.1 netmask 0xff000000
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet6 ::1 prefixlen 128
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
strip0: flags=0<> mtu 1100
strip1: flags=0<> mtu 1100
tun0: flags=10<POINTOPOINT> mtu 1500
tun1: flags=10<POINTOPOINT> mtu 1500
gre0: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
gre1: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
ipip0: flags=8010<POINTOPOINT,MULTICAST>
ipip1: flags=8010<POINTOPOINT,MULTICAST>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
ne2: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 01:d4:ff:03:00:20
        media: Ethernet manual
        inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::f04a:37e6:413b:aaa6%ne2 prefixlen 64 scopeid 0x12

alidoro# netstat -rn -f inet
Routing tables

Internet:
Destination        Gateway            Flags     Refs     Use    Mtu  Interface
default            216.220.227.114    UGS         1       37   1500  ppp0
10/24              link#18            UC          1        0   1500  ex0
10.0.0.1           01:d4:ff:03:00:20  UHLc        0        2   1500  ex0
127                127.0.0.1          UGRS        0        0  33228  lo0
127.0.0.1          127.0.0.1          UH          1        0  33228  lo0
216.220.227.114    216.220.250.85     UH          0        0   1500  ppp0
216.220.250.85     127.0.0.1          UH          0        0  33228  lo0

cerebus# netstat -rn -f inet
Routing tables

Internet:
Destination        Gateway            Flags     Refs     Use    Mtu  Interface
10/24              link#18            UC          2        0   1500  ne2
10.0.0.1           01:d4:ff:03:00:20  UHLc        0        2   1500  lo0
10.0.0.2           00:01:03:a8:80:28  UHLc        0        2   1500  ne2
127                127.0.0.1          UGRS        0        0  33228  lo0
127.0.0.1          127.0.0.1          UH          1        0  33228  lo0

(hm, media type of ne2 is "ethernet manual" - does that mean the card isn't
fully configured?)
--