This is a multi-part message in MIME format.

------=_NextPart_000_0014_01C28768.1B7583B0
Content-Type: text/plain;
	charset="Windows-1252"
Content-Transfer-Encoding: 7bit

1.) I have red the
http://www.netbsd.org/Documentation/network/pppoe/#clamping and configured
up a NAT like:
map pppoe0 0/0 -> 0/0 mssclamp 1452
It helpd some, but not fully! I can now use the web, mainly. But some sites
don't want to come up, or either get stalled after a some initial bytes came
through the net... :( www.netbsd.org is one of them!!

I've got an advice to check that "sysctl -w net.inet.ip.mtudisc=1" should be
1 under 1.6... It wasn't... I've turned it on... Also I have rebuilt the
kernel without inet6, and gateway enabled, but it didn't helped.

So! Has anyone got some usefull hints on that problem?

2.) I would like to change the multi boot menu installed by NetBSD
sysinst... I would like to change default partition, and also the
partition's name... how to do this?

3.) I've rebuilt the kernel with apm enabled... but issuing a "halt -p"
displays this:
APM set power state <2ff,3>: unrecognized device ID (0x907)
How to help on this (I have a VIA KT333 mainboard, which NetBSD identifies
as KT266...)

4.) There are strange errors in the dmesg:
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
wd0a: error writing fsbn 16 of 16-19 (wd0 bn 14699491; cn 14582 tn 13 sn
16), retrying
wd0: (aborted command, interface CRC error)
wd0: soft error (corrected)
sometimes the 4-5th rows apears more times, during boot... What is it? How
to solve?

5.) I also see, that my HDD LED constantly lights. Is it becouse NetBSD
constantly uses it, or just NetBSD somehow configured to constantly light on
the HDD LED?

6.) Please tell me someone about a good http proxy server. Is there any kind
of http/pop3/smtp/ftp/telnet/socks5 proxy server like WinGate - easy to
configure, yet powerfull and featurefull?

7.) Is there a Multi Processor (i386) version of NetBSD? If there is, is it
the -current version, which is not stable? (I would glad to test it, on a
PCI/E-P54NP4 motherboard with 2 P90-s in it)

Thanks for the help, in the past and in advance!

------=_NextPart_000_0014_01C28768.1B7583B0
Content-Type: text/plain;
	name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="dmesg.txt"

NetBSD 1.6 (BHSONE) #1: Fri Nov  8 18:04:08 CET 2002=0A=
    root@bhsone:/mnt/usr/src/sys/arch/i386/compile/BHSONE=0A=
cpu0: AMD Athlon Model 6 (Palomino) (686-class), 1400.67 MHz=0A=
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way=0A=
cpu0: L2 cache 256 KB 64b/line 16-way=0A=
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>=0A=
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>=0A=
cpu0: features 383fbff<FXSR,SSE>=0A=
total memory =3D 255 MB=0A=
avail memory =3D 231 MB=0A=
using 3296 buffers containing 13184 KB of memory=0A=
BIOS32 rev. 0 found at 0xfb480=0A=
mainbus0 (root)=0A=
pci0 at mainbus0 bus 0: configuration mode 1=0A=
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok=0A=
pchb0 at pci0 dev 0 function 0=0A=
pchb0: VIA Technologies VT8366 (Apollo KT266) CPU-PCI Bridge (rev. 0x00)=0A=
agp0 at pchb0: aperture at 0xd8000000, size 0x10000000=0A=
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8366 CPU-AGP Bridge =
(rev. 0x00)=0A=
pci1 at ppb0 bus 1=0A=
pci1: i/o space, memory space enabled=0A=
vga1 at pci1 dev 0 function 0: Nvidia Corporation GeForce2 MX [NV11] =
(rev. 0xb2)=0A=
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)=0A=
wsmux1: connecting to wsdisplay0=0A=
emuxki0 at pci0 dev 8 function 0: Creative Labs SBLive! EMU 10000 (audio =
multimedia, revision 0x07)=0A=
emuxki0: interrupting at irq 10=0A=
emuxki0: EMC40 codec; 18 bit DAC, 18 bit ADC, no 3D stereo=0A=
audio0 at emuxki0: full duplex, mmap, independent=0A=
Creative Labs PCI Gameport Joystick (miscellaneous input, revision 0x07) =
at pci0 dev 8 function 1 not configured=0A=
ne2 at pci0 dev 9 function 0: RealTek 8029 Ethernet=0A=
ne2: Ethernet address 00:c0:df:f5:23:91=0A=
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto=0A=
ne2: interrupting at irq 12=0A=
rtk0 at pci0 dev 11 function 0: RealTek 8139 10/100BaseTX=0A=
rtk0: interrupting at irq 10=0A=
rtk0: Ethernet address 00:50:fc:6a:a0:eb=0A=
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface=0A=
ukphy0: OUI 0x000000, model 0x0000, rev. 0=0A=
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
3Dfx Interactive Voodoo2 (video multimedia, revision 0x02) at pci0 dev =
15 function 0 not configured=0A=
pcib0 at pci0 dev 17 function 0=0A=
pcib0: VIA Technologies VT8233A PCI-ISA Bridge (rev. 0x00)=0A=
pciide0 at pci0 dev 17 function 1: VIA Technologies VT8233A ATA133 =
controller=0A=
pciide0: bus-master DMA support present=0A=
pciide0: primary channel configured to compatibility mode=0A=
wd0 at pciide0 channel 0 drive 0: <IC35L080AVVA07-0>=0A=
wd0: drive supports 16-sector PIO transfers, LBA addressing=0A=
wd0: 78533 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 =
sectors=0A=
wd0: 32-bit data port=0A=
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)=0A=
wd1 at pciide0 channel 0 drive 1: <SAMSUNG VG38404A>=0A=
wd1: drive supports 16-sector PIO transfers, LBA addressing=0A=
wd1: 8056 MB, 16368 cyl, 16 head, 63 sec, 512 bytes/sect x 16498944 =
sectors=0A=
wd1: 32-bit data port=0A=
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)=0A=
pciide0: primary channel interrupting at irq 14=0A=
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using =
DMA data transfers)=0A=
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA data transfers)=0A=
pciide0: secondary channel configured to compatibility mode=0A=
atapibus0 at pciide0 channel 1: 2 targets=0A=
cd0 at atapibus0 drive 1: <SAMSUNG CD-R/RW DRIVE SW-224B, , VE002R4> =
type 5 cdrom removable=0A=
cd0: 32-bit data port=0A=
cd0: drive supports PIO mode 4, DMA mode 2=0A=
pciide0: secondary channel interrupting at irq 15=0A=
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)=0A=
isa0 at pcib0=0A=
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo=0A=
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo=0A=
pckbc0 at isa0 port 0x60-0x64=0A=
pckbd0 at pckbc0 (kbd slot)=0A=
pckbc0: using irq 1 for kbd slot=0A=
wskbd0 at pckbd0: console keyboard, using wsdisplay0=0A=
lpt0 at isa0 port 0x378-0x37b irq 7=0A=
pcppi0 at isa0 port 0x61=0A=
midi0 at pcppi0: PC speaker=0A=
sysbeep0 at pcppi0=0A=
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support=0A=
npx0 at isa0 port 0xf0-0xff: using exception 16=0A=
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2=0A=
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec=0A=
isapnp0: no ISA Plug 'n Play devices found=0A=
apm0 at mainbus0: Power Management spec V1.2=0A=
biomask eb65 netmask ff65 ttymask ffe7=0A=
Kernelized RAIDframe activated=0A=
wd1: no disk label=0A=
wd1: no disk label=0A=
boot device: wd0=0A=
root on wd0a dumps on wd0b=0A=
root file system type: ffs=0A=
wd0: transfer error, downgrading to Ultra-DMA mode 2=0A=
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA data transfers)=0A=
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA data transfers)=0A=
wd0a: error writing fsbn 16 of 16-19 (wd0 bn 14699491; cn 14582 tn 13 sn =
16), retrying=0A=
wd0: (aborted command, interface CRC error)=0A=
wd0: soft error (corrected)=0A=
IP Filter: v3.4.27 initialized.  Default =3D pass all, Logging =3D =
enabled=0A=
wsdisplay0: screen 1 added (80x25, vt100 emulation)=0A=
wsdisplay0: screen 2 added (80x25, vt100 emulation)=0A=
wsdisplay0: screen 3 added (80x25, vt100 emulation)=0A=
wsdisplay0: screen 4 added (80x25, vt100 emulation)=0A=

------=_NextPart_000_0014_01C28768.1B7583B0--