Hi

Lately i saw a lot of fxp timouts with NetBSD 1.6.I can't remember those 
with
1.5.2 and they started to appear suddenly.I have 4 nics in ny box sitting in
separate irqs.I disabled all unneeded stuff..etc com lpt but they still 
appear when box get a little load.Is this may related a crapy HUB 
or?Sometimes
all is ok...but if they appear even reboot can't fix things!

Greetings


NetBSD 1.6 (GENERIC) #0: Sun Sep  8 19:43:40 UTC 2002
    
autobuild@tgm.daemon.org:/autobuild/i386/OBJ/autobuild/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Klamath) (686-class), 265.92 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: features 80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 80f9ff<PGE,MCA,CMOV,MMX>
total memory = 97916 KB
avail memory = 84264 KB
using 1249 buffers containing 4996 KB of memory
BIOS32 rev. 0 found at 0xf0210
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82441FX PCI and Memory Controller (PMC) (rev. 0x02)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 
0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITA CR-583, , FJA7> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 1
pciide0: primary channel interrupting at irq 14
cd0(pciide0:0:0): using PIO mode 0, DMA mode 1 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
vga1 at pci0 dev 8 function 0: ATI Technologies Mach64 VT (rev. 0x40)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fxp0 at pci0 dev 9 function 0: Intel i82557 Ethernet, rev 2
fxp0: interrupting at irq 4
fxp0: Ethernet address 00:00:e2:0c:5e:a8
nsphy0 at fxp0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 12 function 0: i82550 Ethernet, rev 12
fxp1: interrupting at irq 10
fxp1: Ethernet address 00:02:b3:a3:85:31
inphy0 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2 at pci0 dev 13 function 0: i82550 Ethernet, rev 12
fxp2: interrupting at irq 7
fxp2: Ethernet address 00:02:b3:9d:5e:21
inphy1 at fxp2 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp3 at pci0 dev 14 function 0: i82550 Ethernet, rev 12
fxp3: interrupting at irq 5
fxp3: Ethernet address 00:02:b3:9d:5e:1e
inphy2 at fxp3 phy 1: i82555 10/100 media interface, rev. 4
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc1 at pci0 dev 15 function 0
ahc1: interrupting at irq 11
ahc1: Using left over BIOS settings
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask fb4d netmask fffd ttymask ffff
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <IBM, DCAS-32160W, S61A> SCSI2 0/direct 
fixed
sd0: 2063 MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sect x 4226725 sectors
sd0: sync (50.0ns offset 15), 8-bit (20.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <IBM, DCAS-32160W, S65A> SCSI2 0/direct 
fixed
sd1: 2063 MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sect x 4226725 sectors
sd1: sync (50.0ns offset 15), 8-bit (20.000MB/s) transfers, tagged queueing
Kernelized RAIDframe activated
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
IP Filter: v3.4.27 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout
fxp2: device timeout





---------------------------------------------
Powered By "NetBSD" http://www.netbsd.org/






---------------------------------------------
Powered By "NetBSD" http://www.netbsd.org/