Subject: sound trouble
To: None <netbsd-help@netbsd.org>
From: Nathan Langford <njl@EastCoastEmail.com>
List: netbsd-help
Date: 10/17/2002 16:21:03
Hi,

I'm having some trouble with my sb-pci512 sound card.
Trying to play sound files results in a continuous high 
pitched tone and nothing more.  Any suggestions would
be greatly appreciated.

-Nathan Langford

--here's a dmesg--

NetBSD 1.6 (GENERIC) #0: Sun Sep  8 19:43:40 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/i386/OBJ/autobuild/
src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 906.43 
MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 
2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,S
EP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 127 MB
avail memory = 111 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xfd6e0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr
/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Advanced Micro Devices AMD751 System Controller (rev
. 0x25)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Advanced Micro Devices AMD75
1 PCI-to-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: Nvidia Corporation Vanta (re
v. 0x15)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulatio
n)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 4 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Br
idge (rev. 0x22)
pciide0 at pci0 dev 4 function 1: VIA Technologies VT82C686
A (Apollo KX133) ATA66 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC WD450AA-00BAA0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 42934 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x
 87930864 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 
4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra
/66) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CR-4804TE, , 2.6C> type 5 cdrom 
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 1
cd1 at atapibus0 drive 1: <Pioneer DVD-ROM ATAPIModel DVD-1
15  011, , E1.11> type 5 cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 
2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 3, DMA mode 1 (using DMA d
ata transfers)
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra
/33) (using DMA data transfers)
uhci0 at pci0 dev 4 function 2: VIA Technologies VT83C572 U
SB Controller (rev. 0x10)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1
.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 4 function 3: VIA Technologies VT83C572 U
SB Controller (rev. 0x10)
pci_intr_map: no mapping for pin D (line=00)
uhci1: couldn't map interrupt
VIA Technologies VT82C686A SMBus Controller (SMBus serial b
us, revision 0x30) at pci0 dev 4 function 4 not configured
S3 Trio32/64 (VGA display) at pci0 dev 14 function 0 not co
nfigured
emuxki0 at pci0 dev 15 function 0: Creative Labs SBLive! EM
U 10000 (audio multimedia, revision 0x08)
emuxki0: interrupting at irq 9
emuxki0: TriTech unknown codec; no 3D stereo
audio0 at emuxki0: full duplex, mmap, independent
Creative Labs PCI Gameport Joystick (miscellaneous input, r
evision 0x08) at pci0 dev 15 function 1 not configured
ep0 at pci0 dev 16 function 0: 3Com 3c595-TX 10/100 Etherne
t
ep0: interrupting at irq 9
ep0: address 00:a0:24:cd:bd:3e, 64KB word-wide FIFO, 3:1 Rx
:Tx split
ep0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX (defaul
t 10baseT)
rtk0 at pci0 dev 17 function 0: Accton MPX 5030/5038 10/100
BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:10:b5:75:22:4f
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, aut
o
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask e765 netmask ef65 ttymask ffe7
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
set{u,g}id pid 15376 (netstat) was invoked by uid 1001 ppid
 15375 (mozilla-bin) with fd 0 closed
set{u,g}id pid 15410 (netstat) was invoked by uid 1001 ppid
 15409 (mozilla-bin) with fd 0 closed

pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot


_____________________________________________________________
Do you live on the East Coast?
http://www.EastCoastEmail.com

100s of FREE email addresses --->
http://www.UltimateEmail.com

_____________________________________________________________
Select your own custom email address for FREE! Get you@yourchoice.com w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag