Subject: Re: comms/birda usage: 1.5Z required?
To: Lennart Augustsson <lennart@augustsson.net>
From: Andreas Lohrum <Andreas.Lohrum@tngtech.com>
List: netbsd-help
Date: 06/02/2002 15:28:07
On Sunday, 2 June 2002 15:21:06 (+0200)
"Lennart Augustsson" (lennart@augustsson.net) wrote:
> What does the output of dmesg look like?
>
> -- Lennart
>
I have a ASUS T9400-Notebook, no serial-port. I enabled irda in BIOS with SIR.
Andreas
My dmesg-output:
last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xf1c20, size 96 bytes (4 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x8086 0x1132 A 0x00 11 0 already assigned
000:31:2 0x8086 0x2442 D 0x03 9 0 already assigned
000:31:5 0x8086 0x2445 B 0x01 10 0 already assigned
000:31:6 0x8086 0x2446 B 0x01 10 0 already assigned
001:04:0 0x10ec 0x8139 A 0x02 3 0 already assigned
001:07:0 0x104c 0xac42 A 0x00 11 0 already assigned
001:07:1 0x104c 0xac42 A 0x00 11 0 already assigned
001:07:2 0x104c 0x8027 A 0x00 11 0 already assigned
------------------------------------------
PCI fixup examining 8086:1130
PCI fixup examining 8086:1132
PCI fixup examining 8086:2448
PCI fixup examining 10ec:8139
PCI fixup examining 104c:ac42
PCI bridge 1: primary 1, secondary 2, subordinate 2
PCI fixup examining 104c:ac42
PCI bridge 2: primary 1, secondary 3, subordinate 3
PCI fixup examining 104c:8027
PCI bridge 0: primary 0, secondary 1, subordinate 3
PCI fixup examining 8086:244c
PCI fixup examining 8086:244a
PCI fixup examining 8086:2442
PCI fixup examining 8086:2444
PCI fixup examining 8086:2445
PCI fixup examining 8086:2446
PCI bus #3 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x1130
[OK]
000:02:0 0x8086 0x1132
10h mem 0xf8000000 0x04000000
14h mem 0xf7800000 0x00080000
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x244c
[OK]
000:31:1 0x8086 0x244a
20h port 0x0000b800 0x00000010
[OK]
000:31:2 0x8086 0x2442
20h port 0x0000b400 0x00000020
[OK]
000:31:4 0x8086 0x2444
20h port 0x0000b000 0x00000020
[OK]
000:31:5 0x8086 0x2445
10h port 0x0000e000 0x00000100
14h port 0x0000e100 0x00000040
[OK]
000:31:6 0x8086 0x2446
10h port 0x0000e500 0x00000100
14h port 0x0000e300 0x00000080
[OK]
001:04:0 0x10ec 0x8139
10h port 0x0000d800 0x00000100
14h mem 0xf7000000 0x00000100
[OK]
001:07:0 0x104c 0xac42
10h mem 0x00000000 0x00001000
[NG]
001:07:1 0x104c 0xac42
10h mem 0x00000000 0x00001000
[NG]
001:07:2 0x104c 0x8027
10h mem 0x00000000 0x00000800
14h mem 0x00000000 0x00004000
[NG]
--------------------------[ 3 devices bogus]
Physical memory end: 0x0fee8000
PCI memory mapped I/O space start: 0x0ff00000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x1130
[OK]
000:02:0 0x8086 0x1132
10h mem 0xf8000000 0x04000000
14h mem 0xf7800000 0x00080000
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x244c
[OK]
000:31:1 0x8086 0x244a
20h port 0x0000b800 0x00000010
[OK]
000:31:2 0x8086 0x2442
20h port 0x0000b400 0x00000020
[OK]
000:31:4 0x8086 0x2444
20h port 0x0000b000 0x00000020
[OK]
000:31:5 0x8086 0x2445
10h port 0x0000e000 0x00000100
14h port 0x0000e100 0x00000040
[OK]
000:31:6 0x8086 0x2446
10h port 0x0000e500 0x00000100
14h port 0x0000e300 0x00000080
[OK]
001:04:0 0x10ec 0x8139
10h port 0x0000d800 0x00000100
14h mem 0xf7000000 0x00000100
[OK]
001:07:0 0x104c 0xac42
10h mem 0x0ff00000 0x00001000
[OK]
001:07:1 0x104c 0xac42
10h mem 0x0ff01000 0x00001000
[OK]
001:07:2 0x104c 0x8027
10h mem 0x0ff02000 0x00000800
14h mem 0x0ff04000 0x00004000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82815 Hub (rev. 0x11)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 2 function 0: Intel 82815 Graphics (rev. 0x11)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
rtk0 at pci1 dev 4 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 3
rtk0: Ethernet address 00:e0:18:2d:ea:62
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci1 dev 7 function 0: Texas Instruments PCI4451 PCI-CardBus Bridge w/ OHCI IEEE 1394 Controller (rev. 0x00)
cbb1 at pci1 dev 7 function 1: Texas Instruments PCI4451 PCI-CardBus Bridge w/ OHCI IEEE 1394 Controller (rev. 0x00)
fwohci0 at pci1 dev 7 function 2: Texas Instruments PCI4451 OHCI IEEE 1394 HOST Controller w/ PCI-CardBus Bridge (rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI 1.0, 00:e0:18:00:03:00:99:dc, 400Mb/s, 2048 max_rec, 4 iso_ctx
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BAM LPC Interface Bridge (rev. 0x03)
pciide0 at pci0 dev 31 function 1: Intel 82801BAM IDE Controller (ICH2) (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4018GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x03)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x03)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio
auich0: interrupting at irq 10
auich0: SigmaTel STAC9700 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
auich0: warning, fixed rate codec
audio0 at auich0: full duplex, mmap, independent
Intel 82801BA AC-97 PCI Modem (modem communications, revision 0x03) at pci0 dev 31 function 6 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
apm0: A/C state: on
apm0: battery charge state:
biomask eb65 netmask eb6d ttymask fbef
fw0 at fwohci0: 00:e0:18:00:03:00:99:dc:0a:02:20:00:00:00:00:00
pcmcia1: CIS version PC Card Standard 5.0
pcmcia1: CIS info: AWLAN, WS8P/IEEE, Version 00.00,
pcmcia1: Manufacturer code 0x156, product 0x2
pcmcia1: function 0: network adapter, ccr addr 3e0 mask 1
pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
wi0 at pcmcia1 function 0: AWLAN, WS8P/IEEE, Version 00.00
wi0: 802.11 address 00:01:24:f0:0f:7d
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.B, Firmware: 0.8 variant 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 4 added (80x25, vt100 emulation)